{"title":"ADARAC Ford F-450 Truck Racks","description":null,"products":[{"product_id":"adarac-aluminum-utility-rails-for-97-26-ford-f-150-17-26-f-250-350-8-bed","title":"ADARAC Aluminum Utility Rails For 97-26 Ford F-150 \u0026 17-26 F-250\/350 8' Bed","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe ADARAC Aluminum Utility Rails give you a low-profile mounting system that runs the full length of your truck bed. These are bed rails, not a full overhead rack. They sit less than 1-1\/2 inches above the bed, so you keep a clean side profile while gaining real tie-down and accessory points. Each rail is extruded from rust-resistant aluminum and built model specific, so it follows the lines of your truck bed instead of fighting them.\u003c\/p\u003e\n\u003cp\u003eThis setup is for the truck owner who hauls gear and wants a flexible way to secure it. Bikes, kayaks, ladders, tools, and lumber all tie down through the integrated mounting channels. If you run an inside-the-rail tonneau cover, these rails are designed to work alongside it, including LOMAX and ACCESS covers and most other inside-the-rail bed covers. Every order is backed by our \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003efitment guaranteed\u003c\/a\u003e promise, so you get the rails that match your exact truck.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtruded anodized aluminum\u003c\/strong\u003e resists rust and stands up to daily use, while the finish helps protect your bed caps from scratches and scuffs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow profile under 1.5 inches\u003c\/strong\u003e keeps the rails close to the bed for a clean look and easier loading over the side.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-length integrated mounting channels\u003c\/strong\u003e let you secure cargo and attach accessories anywhere along the rail instead of at fixed points.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional uprights and accessories\u003c\/strong\u003e bolt into the same channels, so you can add height and carry capacity when a job calls for it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilver and Matte Black finishes\u003c\/strong\u003e give you two looks that match common truck and cover colors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eADARAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eTruck Bed Rails\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAnodized Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver, Matte Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eUnder 1-1\/2 in above bed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eBed-rail \/ stake-pocket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eSee ADARAC limited warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eMost trucks install with no drilling. The rails use aluminum stake pocket inserts that drop into the factory stake pockets and lock the rails in place. You set the rail, seat the inserts, and tighten the hardware. Plan on basic hand tools and a second set of hands to keep the rails square while you fasten them.\u003c\/p\u003e\n\u003cp\u003eTrucks that do not have factory stake pockets will require drilling to mount the rails. If you are not sure whether your truck has stake pockets, reach out before you order and we will confirm the right setup for your bed. These rails ship model specific, so fitment is dialed in for your year, make, model, and bed length when you order the correct application.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eAre these full truck racks or just bed rails?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eThese are bed rails, not a full overhead rack. They run along the top edge of your bed and sit under 1-1\/2 inches above it. You get tie-down and accessory points through the mounting channels without the height of a full rack. If you want overhead capacity, see the optional uprights and the rest of the \u003ca href=\"\/collections\/adarac-truck-racks\"\u003eADARAC truck racks\u003c\/a\u003e lineup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eCan I add uprights or accessories later?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eYes. The full-length integrated mounting channels are built to accept optional uprights and a range of accessories. You can start with just the rails for tie-downs, then add uprights when a job needs the extra height and carry capacity. Everything bolts into the same channel, so you are not locked into fixed mounting points.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat finishes are available?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eThe Aluminum Utility Rails come in two finishes, Silver and Matte Black. The anodized aluminum is rust resistant in either finish, and the coating helps protect your bed caps from scratches and scuffs. Pick the one that matches your truck and any cover you run.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eDo I have to drill my truck to install them?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eIf your truck has factory stake pockets, no drilling is needed. The rails mount with aluminum stake pocket inserts that drop straight in. Trucks without stake pockets do require drilling to mount the rails. When in doubt, contact us before ordering and we will confirm what your bed needs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ADARAC Truck Racks","offers":[{"title":"Silver","offer_id":53753355469099,"sku":"F0010021","price":346.5,"currency_code":"USD","in_stock":false},{"title":"Matte Black","offer_id":53753355501867,"sku":"F0010022","price":346.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/LG-ADARAC_ALUMINUM_UTILITY_RAILS_619534bf-d002-4a99-88c0-922f9b8f91d3.jpg?v=1781236736"},{"product_id":"adarac-aluminum-m-series-truck-rack-for-2017-2026-ford-f-250-350-450-8-bed","title":"ADARAC Aluminum M-Series Truck Rack For 2017-2026 Ford F-250\/350\/450 8' Bed","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe ADARAC Aluminum M-Series is a low-profile truck bed rack built for hauling without piling height onto your rig. It sits 12 inches above the box rail on every truck, so you keep a compact stance that loads close to the ground and stays out of the way when you do not need it. The frame is aluminum, so it carries weight and stands up to the weather instead of rusting out on you.\u003c\/p\u003e\n\u003cp\u003eThis rack is for the truck owner who works during the week and plays on the weekend. Run it as a lumber rack to move long material, then switch over to a base for a bike setup, kayaks, or a truck tent. The compact uprights and utility rails give you a practical platform that adjusts to the load in front of you, and a load divider comes in the box to help you keep cargo separated and steady.\u003c\/p\u003e\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow 12 in. profile:\u003c\/strong\u003e Sits 12 inches above the box rail on all trucks, so loading stays near ground level and the rack keeps a clean, compact look behind the cab.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact uprights:\u003c\/strong\u003e Reposition or pull the mid-height uprights off entirely when you want more room, opening up the bed for taller or wider loads without tools and without removing the whole rack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded load divider:\u003c\/strong\u003e Comes with a load divider that sits 3 inches above the cross bars to separate cargo, brace long material, and keep your load from shifting on the road.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUtility rails and channels:\u003c\/strong\u003e Integrated mounting channels let you secure cargo and snap on accessories fast, and the rails work with or without the uprights in place for full flexibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo finishes:\u003c\/strong\u003e Choose Silver to match polished aluminum or Matte Black to blend in with a dark bed cover and a blacked-out truck.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eADARAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eTruck Bed Rack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver, Matte Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e12 in. above box rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eBed-rail \/ stake-pocket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eSee ADARAC limited warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThe M-Series mounts with aluminum stake-pocket inserts, so most trucks bolt this rack on with no drilling. The inserts drop into the factory stake pockets and clamp down, which keeps your bed sheet metal intact and lets you pull the rack later without leaving holes behind. Plan on hand tools and a second set of hands for the cross bars, since the bars run long and are easier to set with help.\u003c\/p\u003e\n\u003cp\u003eIf your truck does not have stake pockets, the install will require drilling to anchor the rack. Check your bed before you order, and reach out if you want to confirm the setup for your exact truck. We want you on the right rack the first time, and every order is \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003efitment guaranteed\u003c\/a\u003e when you talk to us first. You can see the rest of the lineup on our \u003ca href=\"\/collections\/adarac-truck-racks\"\u003eADARAC truck racks\u003c\/a\u003e page.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eHow low does the M-Series sit?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eThe rack sits 12 inches above the box rail on every truck it fits. That low-profile height keeps loading close to the ground and keeps the rack compact behind the cab. The included load divider adds 3 inches above the cross bars when it is in place.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat finishes are available?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eThe M-Series comes in Silver and Matte Black. Silver shows off the aluminum and pairs with brighter trucks, while Matte Black blends in with a dark bed cover and a blacked-out build.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eDo I need to drill to install it?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eMost trucks need no drilling. The aluminum stake-pocket inserts drop into the factory stake pockets and clamp down. Trucks without stake pockets do require drilling to anchor the rack, so check your bed first or reach out and we will confirm it for your truck.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat can the M-Series carry?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eIt handles long material like lumber and pipe, plus weekend gear such as bikes, kayaks, and a truck tent. The compact uprights reposition or come off for taller loads, and the utility rails and cross bars give you multiple tie-down points to lock cargo down.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ADARAC Truck Racks","offers":[{"title":"Silver","offer_id":53753356157227,"sku":"F4010061","price":655.2,"currency_code":"USD","in_stock":false},{"title":"Matte Black","offer_id":53753356189995,"sku":"F4010062","price":655.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/LG-ADARAC_ALUMINUM_M_SERIES_1ad0e88e-8623-46c0-bada-c441cd7feeee.jpg?v=1781236739"},{"product_id":"adarac-aluminum-utility-rails-for-2008-2016-ford-f-250-350-450-8-bed","title":"ADARAC Aluminum Utility Rails For 2008-2016 Ford F-250\/350\/450 8' Bed","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe ADARAC Aluminum Utility Rails give you a low-profile mounting system that runs the full length of your truck bed. These are bed rails, not a full overhead rack. They sit less than 1-1\/2 inches above the bed, so you keep a clean side profile while gaining real tie-down and accessory points. Each rail is extruded from rust-resistant aluminum and built model specific, so it follows the lines of your truck bed instead of fighting them.\u003c\/p\u003e\n\u003cp\u003eThis setup is for the truck owner who hauls gear and wants a flexible way to secure it. Bikes, kayaks, ladders, tools, and lumber all tie down through the integrated mounting channels. If you run an inside-the-rail tonneau cover, these rails are designed to work alongside it, including LOMAX and ACCESS covers and most other inside-the-rail bed covers. Every order is backed by our \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003efitment guaranteed\u003c\/a\u003e promise, so you get the rails that match your exact truck.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtruded anodized aluminum\u003c\/strong\u003e resists rust and stands up to daily use, while the finish helps protect your bed caps from scratches and scuffs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow profile under 1.5 inches\u003c\/strong\u003e keeps the rails close to the bed for a clean look and easier loading over the side.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-length integrated mounting channels\u003c\/strong\u003e let you secure cargo and attach accessories anywhere along the rail instead of at fixed points.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional uprights and accessories\u003c\/strong\u003e bolt into the same channels, so you can add height and carry capacity when a job calls for it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilver and Matte Black finishes\u003c\/strong\u003e give you two looks that match common truck and cover colors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eADARAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eTruck Bed Rails\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAnodized Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver, Matte Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eUnder 1-1\/2 in above bed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eBed-rail \/ stake-pocket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eSee ADARAC limited warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eMost trucks install with no drilling. The rails use aluminum stake pocket inserts that drop into the factory stake pockets and lock the rails in place. You set the rail, seat the inserts, and tighten the hardware. Plan on basic hand tools and a second set of hands to keep the rails square while you fasten them.\u003c\/p\u003e\n\u003cp\u003eTrucks that do not have factory stake pockets will require drilling to mount the rails. If you are not sure whether your truck has stake pockets, reach out before you order and we will confirm the right setup for your bed. These rails ship model specific, so fitment is dialed in for your year, make, model, and bed length when you order the correct application.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eAre these full truck racks or just bed rails?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eThese are bed rails, not a full overhead rack. They run along the top edge of your bed and sit under 1-1\/2 inches above it. You get tie-down and accessory points through the mounting channels without the height of a full rack. If you want overhead capacity, see the optional uprights and the rest of the \u003ca href=\"\/collections\/adarac-truck-racks\"\u003eADARAC truck racks\u003c\/a\u003e lineup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eCan I add uprights or accessories later?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eYes. The full-length integrated mounting channels are built to accept optional uprights and a range of accessories. You can start with just the rails for tie-downs, then add uprights when a job needs the extra height and carry capacity. Everything bolts into the same channel, so you are not locked into fixed mounting points.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat finishes are available?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eThe Aluminum Utility Rails come in two finishes, Silver and Matte Black. The anodized aluminum is rust resistant in either finish, and the coating helps protect your bed caps from scratches and scuffs. Pick the one that matches your truck and any cover you run.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eDo I have to drill my truck to install them?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eIf your truck has factory stake pockets, no drilling is needed. The rails mount with aluminum stake pocket inserts that drop straight in. Trucks without stake pockets do require drilling to mount the rails. When in doubt, contact us before ordering and we will confirm what your bed needs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ADARAC Truck Racks","offers":[{"title":"Silver","offer_id":53753356288299,"sku":"F0010051","price":344.7,"currency_code":"USD","in_stock":false},{"title":"Matte Black","offer_id":53753356321067,"sku":"F0010052","price":344.7,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/LG-ADARAC_ALUMINUM_UTILITY_RAILS_1c4d6e65-6685-4eb1-9a75-02867ec468cf.jpg?v=1781236740"},{"product_id":"adarac-aluminum-m-series-truck-rack-for-2008-2016-ford-f-250-350-450-8-bed","title":"ADARAC Aluminum M-Series Truck Rack For 2008-2016 Ford F-250\/350\/450 8' Bed","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe ADARAC Aluminum M-Series is a low-profile truck bed rack built for hauling without piling height onto your rig. It sits 12 inches above the box rail on every truck, so you keep a compact stance that loads close to the ground and stays out of the way when you do not need it. The frame is aluminum, so it carries weight and stands up to the weather instead of rusting out on you.\u003c\/p\u003e\n\u003cp\u003eThis rack is for the truck owner who works during the week and plays on the weekend. Run it as a lumber rack to move long material, then switch over to a base for a bike setup, kayaks, or a truck tent. The compact uprights and utility rails give you a practical platform that adjusts to the load in front of you, and a load divider comes in the box to help you keep cargo separated and steady.\u003c\/p\u003e\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow 12 in. profile:\u003c\/strong\u003e Sits 12 inches above the box rail on all trucks, so loading stays near ground level and the rack keeps a clean, compact look behind the cab.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact uprights:\u003c\/strong\u003e Reposition or pull the mid-height uprights off entirely when you want more room, opening up the bed for taller or wider loads without tools and without removing the whole rack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded load divider:\u003c\/strong\u003e Comes with a load divider that sits 3 inches above the cross bars to separate cargo, brace long material, and keep your load from shifting on the road.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUtility rails and channels:\u003c\/strong\u003e Integrated mounting channels let you secure cargo and snap on accessories fast, and the rails work with or without the uprights in place for full flexibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo finishes:\u003c\/strong\u003e Choose Silver to match polished aluminum or Matte Black to blend in with a dark bed cover and a blacked-out truck.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eADARAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eTruck Bed Rack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver, Matte Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e12 in. above box rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eBed-rail \/ stake-pocket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eSee ADARAC limited warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThe M-Series mounts with aluminum stake-pocket inserts, so most trucks bolt this rack on with no drilling. The inserts drop into the factory stake pockets and clamp down, which keeps your bed sheet metal intact and lets you pull the rack later without leaving holes behind. Plan on hand tools and a second set of hands for the cross bars, since the bars run long and are easier to set with help.\u003c\/p\u003e\n\u003cp\u003eIf your truck does not have stake pockets, the install will require drilling to anchor the rack. Check your bed before you order, and reach out if you want to confirm the setup for your exact truck. We want you on the right rack the first time, and every order is \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003efitment guaranteed\u003c\/a\u003e when you talk to us first. You can see the rest of the lineup on our \u003ca href=\"\/collections\/adarac-truck-racks\"\u003eADARAC truck racks\u003c\/a\u003e page.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eHow low does the M-Series sit?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eThe rack sits 12 inches above the box rail on every truck it fits. That low-profile height keeps loading close to the ground and keeps the rack compact behind the cab. The included load divider adds 3 inches above the cross bars when it is in place.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat finishes are available?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eThe M-Series comes in Silver and Matte Black. Silver shows off the aluminum and pairs with brighter trucks, while Matte Black blends in with a dark bed cover and a blacked-out build.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eDo I need to drill to install it?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eMost trucks need no drilling. The aluminum stake-pocket inserts drop into the factory stake pockets and clamp down. Trucks without stake pockets do require drilling to anchor the rack, so check your bed first or reach out and we will confirm it for your truck.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat can the M-Series carry?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eIt handles long material like lumber and pipe, plus weekend gear such as bikes, kayaks, and a truck tent. The compact uprights reposition or come off for taller loads, and the utility rails and cross bars give you multiple tie-down points to lock cargo down.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ADARAC Truck Racks","offers":[{"title":"Silver","offer_id":53753356353835,"sku":"F4010051","price":653.4,"currency_code":"USD","in_stock":false},{"title":"Matte Black","offer_id":53753356386603,"sku":"F4010052","price":653.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/LG-ADARAC_ALUMINUM_M_SERIES_226fe22a-63bb-4e8b-b368-1d10a1a859c3.jpg?v=1781236740"},{"product_id":"adarac-aluminum-pro-series-truck-rack-for-2017-2026-ford-f-250-350-450-8-bed","title":"ADARAC Aluminum Pro Series Truck Rack For 2017-2026 Ford F-250\/350\/450 8' Bed","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe ADARAC Aluminum Pro Series is a bed rack built around vertical uprights. Those uprights sit straight up off the box rail instead of angling inward, so the framework stays out of your way and leaves the full bed open underneath. That design is the main reason the Pro Series carries more than the standard Aluminum Series. If you load the bed heavy and stack gear up top, this is the version you want.\u003c\/p\u003e\n\u003cp\u003eThe whole rack is aluminum, so it holds up to weather and road salt without rusting like steel. It mounts to your truck bed rails, gives you a taller stance over the box, and works as a tent rack, bike rack, ladder rack, or lumber rack depending on the day. You get a clean way to haul long or bulky loads up high while keeping the bed usable below. Browse the full lineup of \u003ca href=\"\/collections\/adarac-truck-racks\"\u003eADARAC truck racks\u003c\/a\u003e to match the right setup to your truck.\u003c\/p\u003e\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRust-resistant aluminum framework\u003c\/strong\u003e stands up to rain, snow, and salted roads, so the rack keeps its strength and finish through hard seasons.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical uprights\u003c\/strong\u003e cut down on framework interference for maximum payload capacity, and they are simple to remove or reposition when your load changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-length utility rails\u003c\/strong\u003e with integrated mounting channels let you attach accessories and tie down gear, with or without the uprights in place.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-functional cross bars\u003c\/strong\u003e use channels on the top and bottom plus anti-slip, anti-vibration rubber to keep cargo steady down the road.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilver and Matte Black finishes\u003c\/strong\u003e give you two looks, so the rack matches your truck instead of clashing with it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eADARAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eTruck Bed Rack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver, Matte Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight Above Box Rail\u003c\/th\u003e\n\u003ctd\u003e24 in. mid-size, 26 in. full-size, 27 in. Super Duty and 20-ON GM HD 6 ft. 8 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCross Bars\u003c\/th\u003e\n\u003ctd\u003e72 in. L (66 in. L for mid-size), 1-1\/2 in. W x 1-1\/2 in. H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eBed-rail \/ stake-pocket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eSee ADARAC limited warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThe Pro Series mounts with aluminum stake-pocket inserts, so on most trucks you bolt it down with no drilling. If your truck does not have stake pockets, the install does require drilling to secure the rails. Either way, the uprights and cross bars come off and reposition without much fuss once the base rails are set. Talk to us before you order and your fit is \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003efitment guaranteed\u003c\/a\u003e for your exact truck.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eHow is the Pro Series different from the standard Aluminum Series?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eThe Pro Series uses vertical uprights instead of inward-angled ones. That limits framework interference inside the bed and lets the rack carry a heavier payload. It also gives you a taller stance over the box rail, with heights running 24 in. on mid-size trucks, 26 in. on full-size, and 27 in. on Super Duty and 20-ON GM HD 6 ft. 8 in. trucks.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat finishes does it come in?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eYou can get the Aluminum Pro Series in Silver or Matte Black. Both are built on the same rust-resistant aluminum framework, so the choice is about the look you want on your truck.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eDo I have to drill my truck to install it?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eNot on most trucks. The rack uses aluminum stake-pocket inserts, so if your bed has stake pockets you install it without drilling. Trucks without stake pockets do require drilling to mount the rails.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat can I haul and tie down on it?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eThe cross bars and full-length utility rails use integrated mounting channels, so you can run a tent, bikes, ladders, or lumber up top and secure gear along the rails. Anti-slip, anti-vibration rubber on the cross bars helps hold cargo steady, and the uprights come off when you want to run the rails on their own.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ADARAC Truck Racks","offers":[{"title":"Silver","offer_id":53753357959467,"sku":"F2010061","price":775.8,"currency_code":"USD","in_stock":false},{"title":"Matte Black","offer_id":53753357992235,"sku":"F2010062","price":775.8,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/LG-ADARAC_ALUMINUM_PRO_SERIES_0d955223-f5f0-4545-9f65-3e1727696e68.jpg?v=1781236746"},{"product_id":"adarac-aluminum-pro-series-truck-rack-for-2008-2016-ford-f-250-350-450-8-bed","title":"ADARAC Aluminum Pro Series Truck Rack For 2008-2016 Ford F-250\/350\/450 8' Bed","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe ADARAC Aluminum Pro Series is a bed rack built around vertical uprights. Those uprights sit straight up off the box rail instead of angling inward, so the framework stays out of your way and leaves the full bed open underneath. That design is the main reason the Pro Series carries more than the standard Aluminum Series. If you load the bed heavy and stack gear up top, this is the version you want.\u003c\/p\u003e\n\u003cp\u003eThe whole rack is aluminum, so it holds up to weather and road salt without rusting like steel. It mounts to your truck bed rails, gives you a taller stance over the box, and works as a tent rack, bike rack, ladder rack, or lumber rack depending on the day. You get a clean way to haul long or bulky loads up high while keeping the bed usable below. Browse the full lineup of \u003ca href=\"\/collections\/adarac-truck-racks\"\u003eADARAC truck racks\u003c\/a\u003e to match the right setup to your truck.\u003c\/p\u003e\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRust-resistant aluminum framework\u003c\/strong\u003e stands up to rain, snow, and salted roads, so the rack keeps its strength and finish through hard seasons.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical uprights\u003c\/strong\u003e cut down on framework interference for maximum payload capacity, and they are simple to remove or reposition when your load changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-length utility rails\u003c\/strong\u003e with integrated mounting channels let you attach accessories and tie down gear, with or without the uprights in place.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-functional cross bars\u003c\/strong\u003e use channels on the top and bottom plus anti-slip, anti-vibration rubber to keep cargo steady down the road.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilver and Matte Black finishes\u003c\/strong\u003e give you two looks, so the rack matches your truck instead of clashing with it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eADARAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eTruck Bed Rack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver, Matte Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight Above Box Rail\u003c\/th\u003e\n\u003ctd\u003e24 in. mid-size, 26 in. full-size, 27 in. Super Duty and 20-ON GM HD 6 ft. 8 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCross Bars\u003c\/th\u003e\n\u003ctd\u003e72 in. L (66 in. L for mid-size), 1-1\/2 in. W x 1-1\/2 in. H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eBed-rail \/ stake-pocket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eSee ADARAC limited warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThe Pro Series mounts with aluminum stake-pocket inserts, so on most trucks you bolt it down with no drilling. If your truck does not have stake pockets, the install does require drilling to secure the rails. Either way, the uprights and cross bars come off and reposition without much fuss once the base rails are set. Talk to us before you order and your fit is \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003efitment guaranteed\u003c\/a\u003e for your exact truck.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eHow is the Pro Series different from the standard Aluminum Series?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eThe Pro Series uses vertical uprights instead of inward-angled ones. That limits framework interference inside the bed and lets the rack carry a heavier payload. It also gives you a taller stance over the box rail, with heights running 24 in. on mid-size trucks, 26 in. on full-size, and 27 in. on Super Duty and 20-ON GM HD 6 ft. 8 in. trucks.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat finishes does it come in?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eYou can get the Aluminum Pro Series in Silver or Matte Black. Both are built on the same rust-resistant aluminum framework, so the choice is about the look you want on your truck.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eDo I have to drill my truck to install it?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eNot on most trucks. The rack uses aluminum stake-pocket inserts, so if your bed has stake pockets you install it without drilling. Trucks without stake pockets do require drilling to mount the rails.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat can I haul and tie down on it?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eThe cross bars and full-length utility rails use integrated mounting channels, so you can run a tent, bikes, ladders, or lumber up top and secure gear along the rails. Anti-slip, anti-vibration rubber on the cross bars helps hold cargo steady, and the uprights come off when you want to run the rails on their own.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ADARAC Truck Racks","offers":[{"title":"Silver","offer_id":53753358319915,"sku":"F2010051","price":774.0,"currency_code":"USD","in_stock":false},{"title":"Matte Black","offer_id":53753358352683,"sku":"F2010052","price":774.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/LG-ADARAC_ALUMINUM_PRO_SERIES_3e37e6f1-c1bb-4f2a-bc59-5979df5edfbc.jpg?v=1781236747"},{"product_id":"adarac-aluminum-series-truck-rack-for-2008-2016-ford-f-250-350-450-8-bed","title":"ADARAC Aluminum Series Truck Rack For 2008-2016 Ford F-250\/350\/450 8' Bed","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe ADARAC Aluminum Series is a model-specific bed rack that bolts onto your truck and gives you a real spot to haul the long, awkward stuff that won't ride flat in the bed. Bikes, kayaks, ladders, lumber, camping gear, work materials. The adjustable uprights and cross bars let cargo run over the cab, out past the sides, and off the tailgate, so an oversized load rides secure instead of hanging loose.\u003c\/p\u003e\n\u003cp\u003eIt's built for the truck owner who actually uses the bed, whether that's a job site Monday through Friday or a weekend at the lake. The whole framework is aluminum, so it carries serious weight without piling pounds onto your truck. The fit is matched to your specific make, model, and bed length, and every rack is \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003efitment guaranteed\u003c\/a\u003e when you talk to us first.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRust-resistant aluminum framework\u003c\/strong\u003e Aluminum doesn't corrode like steel, so the rack holds up to rain, road salt, and weather without rusting out. You get the strength you need to haul heavy gear without weighing the truck down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContoured, aerodynamic uprights\u003c\/strong\u003e The uprights are shaped to cut wind drag instead of fighting it, which helps your fuel economy on the highway. Each one has tie-down openings up top, and they pull off or reposition in minutes when you want a lower profile or a clear bed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-length utility rails\u003c\/strong\u003e The side rails carry integrated mounting channels, so you can strap down cargo or bolt on accessories fast. They work with the uprights in place or on their own, and 8-foot beds get a bracket that keeps accessories from sliding the whole length of the rail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-functional cross bars\u003c\/strong\u003e Mounting channels run across the top and bottom of each cross bar, giving you plenty of points to secure loads and add gear. Anti-slip, anti-vibration rubber grips your cargo and keeps it steady down the road. The bars measure 66 inches long by 1.5 inches wide by 1.5 inches tall.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo clean finish options\u003c\/strong\u003e Pick Silver or Matte Black to match your truck. Both wear well outdoors, so the rack keeps its look after years of weather and use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOn height, the rack sits about 23 inches above the box rail on mid-size trucks and the 2020-on Jeep Gladiator 5-foot box, 25 inches on full-size trucks, and 27 inches on Super Duty trucks. Load dividers add another 3 inches above the cross bars, which gives you a little more containment for taller loads.\u003c\/p\u003e\n\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eADARAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eTruck Bed Rack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver, Matte Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eBed-rail \/ stake-pocket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight Above Box Rail\u003c\/th\u003e\n\u003ctd\u003e23 in. mid-size and 2020-on Gladiator 5 ft. box; 25 in. full-size; 27 in. Super Duty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCross Bar Size\u003c\/th\u003e\n\u003ctd\u003e66 in. L x 1.5 in. W x 1.5 in. H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eSee ADARAC limited warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eOn most trucks the rack mounts with aluminum stake-pocket inserts, so there's no drilling and no permanent change to your bed. If your truck doesn't have factory stake pockets, the install will require drilling to get the rails anchored. Take your time setting the uprights square before you tighten everything down, and the cargo will ride straight.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat finishes does the ADARAC Aluminum Series come in?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eIt comes in two finishes, Silver and Matte Black. Both are made to hold up outdoors, so you can pick whichever one matches your truck without worrying about the look fading fast. You can see the full lineup on our \u003ca href=\"\/collections\/adarac-truck-racks\"\u003eADARAC truck racks\u003c\/a\u003e page.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eDoes it require drilling to install?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eOn most trucks, no. The rack uses aluminum stake-pocket inserts that drop into your factory stake pockets, so no drilling is needed. If your truck doesn't have stake pockets, then drilling is required to mount the rails.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat can the rack carry?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eIt's built for the long, oversized loads a truck bed can't handle on its own, like bikes, kayaks, ladders, lumber, and other work or recreation gear. The uprights let cargo extend over the cab, sides, and rear, and the cross bars and utility rails give you mounting channels and tie-down points to lock it all down.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWill it work with a tonneau cover?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eYes, it's compatible with ACCESS roll-up covers and most inside-the-rail roll-up covers, so you can keep your bed covered and still run the rack. The tonneau cover is not included with the rack, so you'd buy that separately if you don't already have one.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ADARAC Truck Racks","offers":[{"title":"Silver","offer_id":53753359237419,"sku":"F3010051","price":814.5,"currency_code":"USD","in_stock":false},{"title":"Matte Black","offer_id":53753359270187,"sku":"F3010052","price":814.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/LG-ADARAC_ALUMINUM_SERIES_bbbdb2b8-d0dd-46e2-90e2-4da4d1b283bd.jpg?v=1781236751"},{"product_id":"adarac-aluminum-series-truck-rack-for-2017-2026-ford-f-250-350-450-8-bed","title":"ADARAC Aluminum Series Truck Rack For 2017-2026 Ford F-250\/350\/450 8' Bed","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe ADARAC Aluminum Series is a model-specific bed rack that bolts onto your truck and gives you a real spot to haul the long, awkward stuff that won't ride flat in the bed. Bikes, kayaks, ladders, lumber, camping gear, work materials. The adjustable uprights and cross bars let cargo run over the cab, out past the sides, and off the tailgate, so an oversized load rides secure instead of hanging loose.\u003c\/p\u003e\n\u003cp\u003eIt's built for the truck owner who actually uses the bed, whether that's a job site Monday through Friday or a weekend at the lake. The whole framework is aluminum, so it carries serious weight without piling pounds onto your truck. The fit is matched to your specific make, model, and bed length, and every rack is \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003efitment guaranteed\u003c\/a\u003e when you talk to us first.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRust-resistant aluminum framework\u003c\/strong\u003e Aluminum doesn't corrode like steel, so the rack holds up to rain, road salt, and weather without rusting out. You get the strength you need to haul heavy gear without weighing the truck down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContoured, aerodynamic uprights\u003c\/strong\u003e The uprights are shaped to cut wind drag instead of fighting it, which helps your fuel economy on the highway. Each one has tie-down openings up top, and they pull off or reposition in minutes when you want a lower profile or a clear bed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-length utility rails\u003c\/strong\u003e The side rails carry integrated mounting channels, so you can strap down cargo or bolt on accessories fast. They work with the uprights in place or on their own, and 8-foot beds get a bracket that keeps accessories from sliding the whole length of the rail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-functional cross bars\u003c\/strong\u003e Mounting channels run across the top and bottom of each cross bar, giving you plenty of points to secure loads and add gear. Anti-slip, anti-vibration rubber grips your cargo and keeps it steady down the road. The bars measure 66 inches long by 1.5 inches wide by 1.5 inches tall.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo clean finish options\u003c\/strong\u003e Pick Silver or Matte Black to match your truck. Both wear well outdoors, so the rack keeps its look after years of weather and use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOn height, the rack sits about 23 inches above the box rail on mid-size trucks and the 2020-on Jeep Gladiator 5-foot box, 25 inches on full-size trucks, and 27 inches on Super Duty trucks. Load dividers add another 3 inches above the cross bars, which gives you a little more containment for taller loads.\u003c\/p\u003e\n\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eADARAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eTruck Bed Rack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSilver, Matte Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eBed-rail \/ stake-pocket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight Above Box Rail\u003c\/th\u003e\n\u003ctd\u003e23 in. mid-size and 2020-on Gladiator 5 ft. box; 25 in. full-size; 27 in. Super Duty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCross Bar Size\u003c\/th\u003e\n\u003ctd\u003e66 in. L x 1.5 in. W x 1.5 in. H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eSee ADARAC limited warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eOn most trucks the rack mounts with aluminum stake-pocket inserts, so there's no drilling and no permanent change to your bed. If your truck doesn't have factory stake pockets, the install will require drilling to get the rails anchored. Take your time setting the uprights square before you tighten everything down, and the cargo will ride straight.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat finishes does the ADARAC Aluminum Series come in?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eIt comes in two finishes, Silver and Matte Black. Both are made to hold up outdoors, so you can pick whichever one matches your truck without worrying about the look fading fast. You can see the full lineup on our \u003ca href=\"\/collections\/adarac-truck-racks\"\u003eADARAC truck racks\u003c\/a\u003e page.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eDoes it require drilling to install?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eOn most trucks, no. The rack uses aluminum stake-pocket inserts that drop into your factory stake pockets, so no drilling is needed. If your truck doesn't have stake pockets, then drilling is required to mount the rails.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat can the rack carry?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eIt's built for the long, oversized loads a truck bed can't handle on its own, like bikes, kayaks, ladders, lumber, and other work or recreation gear. The uprights let cargo extend over the cab, sides, and rear, and the cross bars and utility rails give you mounting channels and tie-down points to lock it all down.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWill it work with a tonneau cover?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eYes, it's compatible with ACCESS roll-up covers and most inside-the-rail roll-up covers, so you can keep your bed covered and still run the rack. The tonneau cover is not included with the rack, so you'd buy that separately if you don't already have one.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ADARAC Truck Racks","offers":[{"title":"Silver","offer_id":53753360515371,"sku":"F3010061","price":816.3,"currency_code":"USD","in_stock":false},{"title":"Matte Black","offer_id":53753360548139,"sku":"F3010062","price":816.3,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/LG-ADARAC_ALUMINUM_SERIES_39241508-3b19-40df-9ad8-adf406ff2f9a.jpg?v=1781236755"}],"url":"https:\/\/truckbedbarn.com\/collections\/adarac-ford-f-450-truck-racks.oembed","provider":"Truck Bed Barn","version":"1.0","type":"link"}