{"title":"Bodyguard Chevrolet Silverado 1500 Bumpers","description":null,"products":[{"product_id":"bodyguard-freedom-base-front-bumper-non-winch-for-2022-2026-chevrolet-silverado-1500-nac22a","title":"Bodyguard Freedom Base Front Bumper (Non-Winch) | For 22-26 Chevrolet Silverado 1500","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Bodyguard Freedom Base front bumper is the non-winch variant of the Freedom Series, built for truck owners who want a plate-style replacement bumper without a winch tray. Pick this version if you are not planning to mount a winch. If a winch is in your future, go with the winch-mount Freedom Base instead.\u003c\/p\u003e\n\u003cp\u003eFreedom Base runs a sleek, low-profile shell with a bolt-on modular design, so you can swap mesh and components later, color match to your truck, and run multiple lighting setups. It is a solid fit for off-road rigs and show trucks alike, made from 10 gauge plate steel with 3\/16 inch frame mounts and 3\/4 inch shackle mounts.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNon-winch plate design\u003c\/strong\u003e A cleaner, lighter front end when winch mounting is not part of your build.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMost lighting options on the market\u003c\/strong\u003e Push bar works with Rigid SR-series, E-series, D-series, XL-series, and 360-series lights in several configurations.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModular bolt-on build\u003c\/strong\u003e Mesh and components bolt in, so you can reconfigure or refresh the look without a full bumper swap.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTech-friendly\u003c\/strong\u003e Compatible with adaptive cruise, factory parking sensors, engine block heater plugs, and front camera relocation from grill to push bar.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e Built in Paris, Texas and backed by a Limited Lifetime Warranty on workmanship and materials.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures \u0026amp; Specs\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 10 gauge plate-style steel shell\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrame Mounts:\u003c\/strong\u003e 3\/16 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShackle Mounts:\u003c\/strong\u003e 3\/4 inch thick\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 125 to 150 lb average\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWinch Compatibility:\u003c\/strong\u003e NON-winch variant. No integrated winch tray. Choose the winch-mount Freedom Base if you plan to run a winch.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLight Mounts:\u003c\/strong\u003e Push bar accepts one 20 inch Rigid SR-series single-row bar, one 30 inch Rigid SR or E-series bar (single or double row), one 30 inch SR or E-series plus two D-series cubes, eight D-series cubes, eight XL-series cubes, or eight 360-series 4 inch round lights.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensor and Tech Support:\u003c\/strong\u003e Works with factory parking sensors, adaptive cruise module, engine block heater plug, and front camera relocation to the push bar.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare steel ready for paint or powder, or select a finish option from Bodyguard.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited Lifetime on workmanship and materials. Powder coat finishes carry a Limited One Year warranty from purchase date.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e USA (Paris, Texas)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eFreedom Base is a bolt-on replacement for the factory front bumper using the included stainless button-head bolts and mounting hardware. Most shops and experienced DIYers can handle the swap with standard hand tools. Plan for help or a second set of hands when lifting the shell into position, since average weight runs 125 to 150 lb depending on the fitment.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFreedom Base front bumper shell (non-winch)\u003c\/li\u003e\n  \u003cli\u003eBolt-on license plate bracket\u003c\/li\u003e\n  \u003cli\u003eStainless button-head bolts\u003c\/li\u003e\n  \u003cli\u003eMounting hardware\u003c\/li\u003e\n  \u003cli\u003eInstall instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLights, mesh accessories, and winch-related components are sold separately. See the full \u003ca href=\"\/collections\/bodyguard\"\u003eBodyguard collection\u003c\/a\u003e for matching rear bumpers and accessories.\u003c\/p\u003e\n\n\u003ch2\u003eAbout Bodyguard Bumpers\u003c\/h2\u003e\n\u003cp\u003eBodyguard is a small-batch American bumper builder out of Paris, Texas. Every bumper is cut, welded, and finished in-house, which is why they can offer a Limited Lifetime Warranty on workmanship and materials. The Freedom Series is their modular plate-style lineup, built to stand up to off-road use while still looking clean enough for a show truck.\u003c\/p\u003e\n\n\u003ch2\u003eShipping\u003c\/h2\u003e\n\u003cp\u003eShips via 18-wheeler truck freight on an oversized pallet to destinations within the USA. Inspect the crate on delivery and note any damage on the bill of lading before signing.\u003c\/p\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eDesigned as a direct replacement for the factory front bumper on the listed truck year, make, and model. \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e when you buy through Truck Bed Barn. Before you order, chat or call our team at (623) 272-6510 so we can confirm year, make, and model match the right Freedom Base variant. We do not use VIN lookup, so a quick call beats any guesswork.\u003c\/p\u003e\n\n\u003cp\u003eReady to build your front end? Browse the rest of the \u003ca href=\"\/collections\/bodyguard\"\u003eBodyguard collection\u003c\/a\u003e for matching rear bumpers, winch-mount Freedom Base variants, and Bodyguard accessories.\u003c\/p\u003e","brand":"Bodyguard Bumpers","offers":[{"title":"Bare Metal \/ with Parking Sensor Cutouts","offer_id":53333509046571,"sku":"NAC22AYBNN","price":2295.0,"currency_code":"USD","in_stock":true},{"title":"Textured Black Powder Coat \/ with Parking Sensor Cutouts","offer_id":53333509079339,"sku":"NAC22AYTNN","price":2570.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/19-25RAM2535_1280x599_b66465d8-cdb0-4357-a1fe-a2ac322311d6.jpg?v=1776985736"},{"product_id":"bodyguard-freedom-base-front-bumpers-non-winch","title":"Bodyguard Freedom Base Front Bumpers (Non-Winch)","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Bodyguard Freedom Base front bumper is the non-winch variant of the Freedom Series, built for truck owners who want a plate-style replacement bumper without a winch tray. Pick this version if you are not planning to mount a winch. If a winch is in your future, go with the winch-mount Freedom Base instead.\u003c\/p\u003e\n\u003cp\u003eFreedom Base runs a sleek, low-profile shell with a bolt-on modular design, so you can swap mesh and components later, color match to your truck, and run multiple lighting setups. It is a solid fit for off-road rigs and show trucks alike, made from 10 gauge plate steel with 3\/16 inch frame mounts and 3\/4 inch shackle mounts.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNon-winch plate design\u003c\/strong\u003e A cleaner, lighter front end when winch mounting is not part of your build.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMost lighting options on the market\u003c\/strong\u003e Push bar works with Rigid SR-series, E-series, D-series, XL-series, and 360-series lights in several configurations.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModular bolt-on build\u003c\/strong\u003e Mesh and components bolt in, so you can reconfigure or refresh the look without a full bumper swap.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTech-friendly\u003c\/strong\u003e Compatible with adaptive cruise, factory parking sensors, engine block heater plugs, and front camera relocation from grill to push bar.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMade in the USA\u003c\/strong\u003e Built in Paris, Texas and backed by a Limited Lifetime Warranty on workmanship and materials.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures \u0026amp; Specs\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 10 gauge plate-style steel shell\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrame Mounts:\u003c\/strong\u003e 3\/16 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShackle Mounts:\u003c\/strong\u003e 3\/4 inch thick\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 125 to 150 lb average\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWinch Compatibility:\u003c\/strong\u003e NON-winch variant. No integrated winch tray. Choose the winch-mount Freedom Base if you plan to run a winch.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLight Mounts:\u003c\/strong\u003e Push bar accepts one 20 inch Rigid SR-series single-row bar, one 30 inch Rigid SR or E-series bar (single or double row), one 30 inch SR or E-series plus two D-series cubes, eight D-series cubes, eight XL-series cubes, or eight 360-series 4 inch round lights.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensor and Tech Support:\u003c\/strong\u003e Works with factory parking sensors, adaptive cruise module, engine block heater plug, and front camera relocation to the push bar.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare steel ready for paint or powder, or select a finish option from Bodyguard.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited Lifetime on workmanship and materials. Powder coat finishes carry a Limited One Year warranty from purchase date.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e USA (Paris, Texas)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eFreedom Base is a bolt-on replacement for the factory front bumper using the included stainless button-head bolts and mounting hardware. Most shops and experienced DIYers can handle the swap with standard hand tools. Plan for help or a second set of hands when lifting the shell into position, since average weight runs 125 to 150 lb depending on the fitment.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFreedom Base front bumper shell (non-winch)\u003c\/li\u003e\n  \u003cli\u003eBolt-on license plate bracket\u003c\/li\u003e\n  \u003cli\u003eStainless button-head bolts\u003c\/li\u003e\n  \u003cli\u003eMounting hardware\u003c\/li\u003e\n  \u003cli\u003eInstall instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLights, mesh accessories, and winch-related components are sold separately. See the full \u003ca href=\"\/collections\/bodyguard\"\u003eBodyguard collection\u003c\/a\u003e for matching rear bumpers and accessories.\u003c\/p\u003e\n\n\u003ch2\u003eAbout Bodyguard Bumpers\u003c\/h2\u003e\n\u003cp\u003eBodyguard is a small-batch American bumper builder out of Paris, Texas. Every bumper is cut, welded, and finished in-house, which is why they can offer a Limited Lifetime Warranty on workmanship and materials. The Freedom Series is their modular plate-style lineup, built to stand up to off-road use while still looking clean enough for a show truck.\u003c\/p\u003e\n\n\u003ch2\u003eShipping\u003c\/h2\u003e\n\u003cp\u003eShips via 18-wheeler truck freight on an oversized pallet to destinations within the USA. Inspect the crate on delivery and note any damage on the bill of lading before signing.\u003c\/p\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eDesigned as a direct replacement for the factory front bumper on the listed truck year, make, and model. \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e when you buy through Truck Bed Barn. Before you order, chat or call our team at (623) 272-6510 so we can confirm year, make, and model match the right Freedom Base variant. We do not use VIN lookup, so a quick call beats any guesswork.\u003c\/p\u003e\n\n\u003cp\u003eReady to build your front end? Browse the rest of the \u003ca href=\"\/collections\/bodyguard\"\u003eBodyguard collection\u003c\/a\u003e for matching rear bumpers, winch-mount Freedom Base variants, and Bodyguard accessories.\u003c\/p\u003e","brand":"Bodyguard Bumpers","offers":[{"title":"Default Title","offer_id":53333510357291,"sku":null,"price":2295.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/19-25RAM2535_1280x599_71a9703e-ae1c-4dc8-ab2e-e204fc7d48b2.jpg?v=1776985738"},{"product_id":"bodyguard-freedom-base-front-bumpers-winch-mount","title":"Bodyguard Freedom Base Front Bumpers (Winch Mount)","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Bodyguard Freedom Base Front Bumper with integrated winch mount is a sleek, low-profile steel bumper built for truck owners who want winch capability without stepping up to a premium tier. It is a strong choice for off-road work and show truck builds alike.\u003c\/p\u003e\n\u003cp\u003eEach bumper is welded in Paris, Texas from 10-gauge plate steel with 3\/16\" frame mounts and 3\/4\" thick shackle mounts. The modular design lets you bolt in your own mesh, skid plate, and lighting, so you can color match and configure the bumper to your truck's theme.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated winch plate\u003c\/strong\u003e Built to mount a winch right out of the box, no separate tray or adapter needed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModular lighting\u003c\/strong\u003e More bolt-in lighting configurations than most bumpers on the market, so you set it up once and expand later.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow-profile stance\u003c\/strong\u003e Sleek shell keeps the truck clean and aggressive without adding bulk.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdaptive cruise ready\u003c\/strong\u003e Compatible with the factory adaptive cruise control module so you keep the driver aids you paid for.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBuilt to take a hit\u003c\/strong\u003e 10-gauge plate steel, heavy frame mounts, and 3\/4\" shackle mounts for real off-road use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures \u0026amp; Specs\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 10-gauge plate steel shell\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrame Mounts:\u003c\/strong\u003e 3\/16\" thick\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShackle Mounts:\u003c\/strong\u003e 3\/4\" thick\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 125 to 150 lb average (varies by application)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWinch Compatibility:\u003c\/strong\u003e Integrated winch mount, accepts winches up to 12,000 lb typical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLight Mounts:\u003c\/strong\u003e Bolt-in slots for a 30\" Rigid SR-series or E-series bar (single or double row), 30\" bar plus two D-series cubes, eight Rigid D-series cubes, eight Rigid XL-series cubes, or eight Rigid 360-series 4\" round lights\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdaptive Cruise:\u003c\/strong\u003e Module compatible\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Welded steel, modular bolt-on mesh and components\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare steel ready to powder coat or color match\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Made in the USA, Paris, Texas\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited lifetime warranty on materials and workmanship, one-year limited warranty on powder coat finishes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThe Freedom Base bolts to the factory frame mounts. Installation is straightforward for most shops and experienced DIY owners, though a second set of hands is recommended given the weight. Plan for a few hours start to finish, and more if you are wiring a winch and lighting at the same time.\u003c\/p\u003e\n\u003cp\u003eInstallation steps vary by truck. Consult the Bodyguard install guide for your application or call us and we will walk you through what you need.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFreedom Base winch-mount bumper shell\u003c\/li\u003e\n  \u003cli\u003eBolt-on license plate bracket\u003c\/li\u003e\n  \u003cli\u003eBolt-on reinforced skid plate\u003c\/li\u003e\n  \u003cli\u003eStainless button-head bolts\u003c\/li\u003e\n  \u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLighting, winch, and powder coat or paint are sold separately so you can spec the bumper to match your build.\u003c\/p\u003e\n\n\u003ch2\u003eAbout Bodyguard\u003c\/h2\u003e\n\u003cp\u003eBodyguard Bumpers is a small-batch American manufacturer welding bumpers in Paris, Texas. They build each bumper to order from raw steel, which is why the fit and finish hold up to serious off-road and work truck use.\u003c\/p\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eThe Freedom Base Winch Mount is built for specific year, make, and model combinations. Before you order, call or text our team at (623) 272-6510 so we can confirm the bumper is cut for your exact truck. \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e when you verify with us first, no VIN needed.\u003c\/p\u003e\n\u003cp\u003eBrowse the full \u003ca href=\"\/collections\/bodyguard\"\u003eBodyguard collection\u003c\/a\u003e to compare the Freedom Base against the rest of the lineup, or call us and we will help you match the right bumper to how you actually use your truck.\u003c\/p\u003e","brand":"Bodyguard Bumpers","offers":[{"title":"Default Title","offer_id":53333510750507,"sku":null,"price":2695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/BODYGUARD-Bumpers_LAC22A_2022-2025_Chevrolet-1500_Freedom-Base-Winch-Mount-Front-Bumper_00__59788_1255x700_28fc66dc-1be8-4b6c-a94d-42960be6aaea.jpg?v=1776985739"},{"product_id":"bodyguard-freedom-rear-bumper-for-2019-2026-chevrolet-gmc-silverado-sierra-1500-mgc19a","title":"Bodyguard Freedom Rear Bumper | For 2019 to 2026 Chevrolet\/GMC Silverado\/Sierra 1500","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eHeavy-duty rear replacement bumper built to take a hit and still look clean on a work truck or a show build. The Bodyguard Freedom Rear drops the chrome plastic factory bumper and bolts on welded steel with an integrated 2 inch receiver, D-ring mounts, and step plates built right into the shell.\u003c\/p\u003e\n\u003cp\u003eThe shell is 10 gauge plate steel with 3\/16 inch frame mounts and 3\/4 inch thick shackle mounts. Average shipping weight runs 100 to 120 pounds depending on fitment. The low profile design keeps the footprint tight to the truck so it pairs naturally with a Bodyguard Freedom front bumper without throwing off the stance.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWelded steel construction\u003c\/strong\u003e Replaces the factory plastic bumper with 10 gauge plate steel that holds up to trail contact and daily work.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated 2 inch receiver\u003c\/strong\u003e Class III hitch receiver is built into the bumper so you can tow and run a ball mount without a separate bracket.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eD-ring shackle mounts\u003c\/strong\u003e 3\/4 inch thick shackle mounts give you a real recovery point at the rear of the truck.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated corner steps and bolt-on step pads\u003c\/strong\u003e Easy step up to reach the bed or tie down cargo on either side.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor match ready\u003c\/strong\u003e Finish can be powder coated or color matched to the truck, which is why Bodyguard calls it the Freedom Series.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures \u0026amp; Specs\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 10 gauge plate-style steel shell\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrame Mounts:\u003c\/strong\u003e 3\/16 inch plate\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShackle Mounts:\u003c\/strong\u003e 3\/4 inch thick\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 100 to 120 lb average (varies by fitment)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReceiver Hitch Class:\u003c\/strong\u003e Integrated 2 inch Class III receiver\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eD-ring Mounts:\u003c\/strong\u003e Yes, bolt-in shackle mounts on both sides\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStep Plate:\u003c\/strong\u003e Bolt-on step pads plus integrated corner steps\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLighting Prep:\u003c\/strong\u003e Accepts Rigid D-Series surface mount lights in the corner step and Rigid Ignite Series flush mount backup lights (lights sold separately)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFactory Parking Sensors:\u003c\/strong\u003e Compatible with factory parking sensor trucks\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the USA, Paris, Texas\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited Lifetime Warranty on workmanship and materials; Limited One Year Warranty on powder coat finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eBolt-on install using the factory frame holes and the supplied mounting hardware. The modular design means the step pads, license plate bracket, and corner components ship as bolt-in pieces, so you can swap or service sections later without pulling the whole bumper. Plan on a couple of hours in the driveway with a helper since the bumper runs over 100 pounds. Keep a floor jack under it during the lift for safety.\u003c\/p\u003e\n\u003ch3\u003eInstall Manual\u003c\/h3\u003e\n\u003cp\u003eBodyguard ships printed install instructions in the crate. If you need a digital copy, contact our team and we can request one from the factory for your specific fitment.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eBodyguard Freedom rear bumper shell\u003c\/li\u003e\n  \u003cli\u003eBolt-on license plate bracket\u003c\/li\u003e\n  \u003cli\u003eBolt-on step pads\u003c\/li\u003e\n  \u003cli\u003eStainless button-head bolts\u003c\/li\u003e\n  \u003cli\u003eMounting hardware\u003c\/li\u003e\n  \u003cli\u003ePrinted install instructions\u003c\/li\u003e\n  \u003cli\u003eWarranty information\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout Bodyguard\u003c\/h2\u003e\n\u003cp\u003eBodyguard Bumpers is a family-run shop in Paris, Texas that has been building welded steel bumpers for work trucks and off-road rigs for decades. Every Freedom Series bumper is cut, welded, and finished in-house in the USA.\u003c\/p\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eDesigned as a direct replacement for the factory rear bumper on select year, make, and model trucks. \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e when you buy through Truck Bed Barn. Because bumpers are oversized freight and non-returnable once shipped, chat or call our team at (623) 272-6510 before you order so we can confirm year, make, and model against the correct part number. We do not verify by VIN, we verify by your truck's year, make, model, and trim.\u003c\/p\u003e\n\n\u003ch2\u003eShipping\u003c\/h2\u003e\n\u003cp\u003eShips 18-wheeler truck freight on oversized pallets to destinations in the USA. A lift gate or loading dock is recommended since the crate is heavy.\u003c\/p\u003e\n\n\u003cp\u003ePairing the Freedom Rear with a matching front bumper keeps the truck looking right on both ends. See the full lineup in the \u003ca href=\"\/collections\/bodyguard\"\u003eBodyguard collection\u003c\/a\u003e for front bumpers, Freedom Series options, and color-match finishes.\u003c\/p\u003e","brand":"Bodyguard Bumpers","offers":[{"title":"Bare Metal \/ with Parking Sensor Cutouts","offer_id":53333510979883,"sku":"MGC19AYB","price":1895.0,"currency_code":"USD","in_stock":true},{"title":"Textured Black Powder Coat \/ with Parking Sensor Cutouts","offer_id":53333511012651,"sku":"MGC19AYT","price":2120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/2017-2022_Ford_250-350_-_Freedom_Series_-_Rear_Bumper__29015_1472x700_192425ab-4d81-44c2-8492-f4bd6b42f009.jpg?v=1776985740"},{"product_id":"bodyguard-freedom-base-front-bumper-winch-mount-for-2022-2026-chevrolet-silverado-1500-lac22a","title":"Bodyguard Freedom Base Front Bumper (Winch Mount) | For 22-26 Chevrolet Silverado 1500","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Bodyguard Freedom Base Front Bumper with integrated winch mount is a sleek, low-profile steel bumper built for truck owners who want winch capability without stepping up to a premium tier. It is a strong choice for off-road work and show truck builds alike.\u003c\/p\u003e\n\u003cp\u003eEach bumper is welded in Paris, Texas from 10-gauge plate steel with 3\/16\" frame mounts and 3\/4\" thick shackle mounts. The modular design lets you bolt in your own mesh, skid plate, and lighting, so you can color match and configure the bumper to your truck's theme.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated winch plate\u003c\/strong\u003e Built to mount a winch right out of the box, no separate tray or adapter needed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModular lighting\u003c\/strong\u003e More bolt-in lighting configurations than most bumpers on the market, so you set it up once and expand later.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow-profile stance\u003c\/strong\u003e Sleek shell keeps the truck clean and aggressive without adding bulk.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdaptive cruise ready\u003c\/strong\u003e Compatible with the factory adaptive cruise control module so you keep the driver aids you paid for.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBuilt to take a hit\u003c\/strong\u003e 10-gauge plate steel, heavy frame mounts, and 3\/4\" shackle mounts for real off-road use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures \u0026amp; Specs\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 10-gauge plate steel shell\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrame Mounts:\u003c\/strong\u003e 3\/16\" thick\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShackle Mounts:\u003c\/strong\u003e 3\/4\" thick\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 125 to 150 lb average (varies by application)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWinch Compatibility:\u003c\/strong\u003e Integrated winch mount, accepts winches up to 12,000 lb typical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLight Mounts:\u003c\/strong\u003e Bolt-in slots for a 30\" Rigid SR-series or E-series bar (single or double row), 30\" bar plus two D-series cubes, eight Rigid D-series cubes, eight Rigid XL-series cubes, or eight Rigid 360-series 4\" round lights\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdaptive Cruise:\u003c\/strong\u003e Module compatible\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Welded steel, modular bolt-on mesh and components\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Bare steel ready to powder coat or color match\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Made in the USA, Paris, Texas\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited lifetime warranty on materials and workmanship, one-year limited warranty on powder coat finishes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThe Freedom Base bolts to the factory frame mounts. Installation is straightforward for most shops and experienced DIY owners, though a second set of hands is recommended given the weight. Plan for a few hours start to finish, and more if you are wiring a winch and lighting at the same time.\u003c\/p\u003e\n\u003cp\u003eInstallation steps vary by truck. Consult the Bodyguard install guide for your application or call us and we will walk you through what you need.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFreedom Base winch-mount bumper shell\u003c\/li\u003e\n  \u003cli\u003eBolt-on license plate bracket\u003c\/li\u003e\n  \u003cli\u003eBolt-on reinforced skid plate\u003c\/li\u003e\n  \u003cli\u003eStainless button-head bolts\u003c\/li\u003e\n  \u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLighting, winch, and powder coat or paint are sold separately so you can spec the bumper to match your build.\u003c\/p\u003e\n\n\u003ch2\u003eAbout Bodyguard\u003c\/h2\u003e\n\u003cp\u003eBodyguard Bumpers is a small-batch American manufacturer welding bumpers in Paris, Texas. They build each bumper to order from raw steel, which is why the fit and finish hold up to serious off-road and work truck use.\u003c\/p\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eThe Freedom Base Winch Mount is built for specific year, make, and model combinations. Before you order, call or text our team at (623) 272-6510 so we can confirm the bumper is cut for your exact truck. \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e when you verify with us first, no VIN needed.\u003c\/p\u003e\n\u003cp\u003eBrowse the full \u003ca href=\"\/collections\/bodyguard\"\u003eBodyguard collection\u003c\/a\u003e to compare the Freedom Base against the rest of the lineup, or call us and we will help you match the right bumper to how you actually use your truck.\u003c\/p\u003e","brand":"Bodyguard Bumpers","offers":[{"title":"Textured Black Powder Coat \/ with Parking Sensor Cutouts","offer_id":53333511078187,"sku":"LAC22AYTNN","price":2970.0,"currency_code":"USD","in_stock":true},{"title":"Bare Metal \/ with Parking Sensor Cutouts","offer_id":53333511110955,"sku":"LAC22AYBNN","price":2695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/BODYGUARD-Bumpers_LAC22A_2022-2025_Chevrolet-1500_Freedom-Base-Winch-Mount-Front-Bumper_00__59788_1255x700_eb67c21a-e4cd-4d84-b1bb-cd84220e4ba0.jpg?v=1776985740"},{"product_id":"bodyguard-freedom-baja-front-bumpers","title":"Bodyguard Freedom Baja Front Bumpers","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Bodyguard Freedom Baja is a desert-racing-inspired front replacement bumper built for truck owners who want a prerunner stance with real off-road capability. It sits at the aggressive end of the Freedom lineup with an integrated bull bar, beefed-up light tab array, and a low-profile plate-style face.\u003c\/p\u003e\n\u003cp\u003eThe shell is 10-gauge plate steel with 3\/16\" frame mounts and 3\/4\" shackle mounts, hand-welded at Bodyguard's shop in Paris, Texas. Modular bolt-in mesh and components let you configure the face the way you want, and the low-profile design keeps the bumper in the 125 to 150 pound range so you're not loading the front axle with dead weight.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrerunner-inspired stance\u003c\/strong\u003e Integrated push bar and sculpted wings give the truck an aggressive Baja race look without a full grille guard footprint.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBiggest light setup in the class\u003c\/strong\u003e One of the most configurable lighting arrays on the market, with tab provisions for Rigid SR-series, E-series, D-series cubes, XL Series cubes, and 360-Series 4 inch round lights.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFactory tech still works\u003c\/strong\u003e Compatible with adaptive cruise, factory parking sensors, and engine block heater plugs. The push bar lets you relocate the front camera from the grille into the bumper so lane-keep and trail-cam features keep working.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModular and color-match ready\u003c\/strong\u003e Ships in raw or textured black and can be color-matched to your truck's paint code for a clean OEM-plus finish.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBuilt in the USA\u003c\/strong\u003e Hand-welded in Paris, Texas, and backed by a Limited Lifetime warranty on material and workmanship.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures \u0026amp; Specs\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 10-gauge plate-style steel shell\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrame Mounts:\u003c\/strong\u003e 3\/16 inch steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShackle Mounts:\u003c\/strong\u003e 3\/4 inch thick\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Approximately 125 to 150 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Raw or textured black powder coat, color-match available\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWinch Compatibility:\u003c\/strong\u003e Competitor product copy lists this as a non-winch-mount bumper, while select Baja SKUs (Ram TRX, Ford Raptor) are pictured with an integrated low-profile winch tray. Call our team before ordering so we confirm whether your specific truck year and trim gets the winch-ready version or the non-winch shell.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLight Mounts:\u003c\/strong\u003e Push bar accepts a 20 inch Rigid SR-series single-row bar, a 30 inch SR-series or E-series bar (single or double row), a 30 inch bar with two D-series cubes, or 8 D-series cubes, 8 XL Series cubes, or 8 360-Series 4 inch round lights.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensor Compatibility:\u003c\/strong\u003e Works with factory parking sensors and adaptive cruise modules\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCamera Ready:\u003c\/strong\u003e Push bar allows relocation of the factory front camera\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in Paris, Texas, USA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited Lifetime on workmanship and material. Powder coat finish carries a Limited One Year warranty from original purchase date.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThe Freedom Baja is a bolt-on front replacement that uses your truck's factory frame mounting points. No drilling into the frame. Plan on a few hours in the driveway with a second set of hands because the bumper is heavy and awkward to lift into position on your own. Stainless button-head bolts and all mounting hardware ship in the box.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFreedom Baja front bumper shell\u003c\/li\u003e\n  \u003cli\u003eBolt-on license plate bracket\u003c\/li\u003e\n  \u003cli\u003eStainless button-head bolts\u003c\/li\u003e\n  \u003cli\u003eFrame-mount hardware kit\u003c\/li\u003e\n  \u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll lights, light bars, winches, and winch accessories are sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eAbout Bodyguard Bumpers\u003c\/h2\u003e\n\u003cp\u003eBodyguard Bumpers has been hand-welding truck bumpers in Paris, Texas for years. Every Freedom, Traditional, and A2 bumper is built to order in-house, not outsourced, which is why the fit and finish holds up against daily driving and real off-road use. See the full \u003ca href=\"\/collections\/bodyguard\"\u003eBodyguard collection\u003c\/a\u003e for matching rear bumpers and other front options.\u003c\/p\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eThe Freedom Baja Front is cut specifically for the year, make, and model of truck you select at checkout. Fitment and winch-mount availability vary by truck, so before you order, call or text our team at (623) 272-6510 and we'll confirm the right SKU for your exact truck. \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e when you verify with us first.\u003c\/p\u003e\n\u003cp\u003eShips on an oversized pallet via 18-wheeler freight to destinations inside the USA.\u003c\/p\u003e\n","brand":"Bodyguard Bumpers","offers":[{"title":"Default Title","offer_id":53333511700779,"sku":null,"price":3170.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/22-26Chevy1500_1251x698_95853098-5dd8-474c-95c2-406191410a66.jpg?v=1776985742"},{"product_id":"bodyguard-freedom-rear-bumpers","title":"Bodyguard Freedom Rear Bumpers","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eHeavy-duty rear replacement bumper built to take a hit and still look clean on a work truck or a show build. The Bodyguard Freedom Rear drops the chrome plastic factory bumper and bolts on welded steel with an integrated 2 inch receiver, D-ring mounts, and step plates built right into the shell.\u003c\/p\u003e\n\u003cp\u003eThe shell is 10 gauge plate steel with 3\/16 inch frame mounts and 3\/4 inch thick shackle mounts. Average shipping weight runs 100 to 120 pounds depending on fitment. The low profile design keeps the footprint tight to the truck so it pairs naturally with a Bodyguard Freedom front bumper without throwing off the stance.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWelded steel construction\u003c\/strong\u003e Replaces the factory plastic bumper with 10 gauge plate steel that holds up to trail contact and daily work.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated 2 inch receiver\u003c\/strong\u003e Class III hitch receiver is built into the bumper so you can tow and run a ball mount without a separate bracket.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eD-ring shackle mounts\u003c\/strong\u003e 3\/4 inch thick shackle mounts give you a real recovery point at the rear of the truck.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated corner steps and bolt-on step pads\u003c\/strong\u003e Easy step up to reach the bed or tie down cargo on either side.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor match ready\u003c\/strong\u003e Finish can be powder coated or color matched to the truck, which is why Bodyguard calls it the Freedom Series.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures \u0026amp; Specs\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 10 gauge plate-style steel shell\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrame Mounts:\u003c\/strong\u003e 3\/16 inch plate\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShackle Mounts:\u003c\/strong\u003e 3\/4 inch thick\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 100 to 120 lb average (varies by fitment)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReceiver Hitch Class:\u003c\/strong\u003e Integrated 2 inch Class III receiver\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eD-ring Mounts:\u003c\/strong\u003e Yes, bolt-in shackle mounts on both sides\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStep Plate:\u003c\/strong\u003e Bolt-on step pads plus integrated corner steps\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLighting Prep:\u003c\/strong\u003e Accepts Rigid D-Series surface mount lights in the corner step and Rigid Ignite Series flush mount backup lights (lights sold separately)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFactory Parking Sensors:\u003c\/strong\u003e Compatible with factory parking sensor trucks\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in the USA, Paris, Texas\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited Lifetime Warranty on workmanship and materials; Limited One Year Warranty on powder coat finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eBolt-on install using the factory frame holes and the supplied mounting hardware. The modular design means the step pads, license plate bracket, and corner components ship as bolt-in pieces, so you can swap or service sections later without pulling the whole bumper. Plan on a couple of hours in the driveway with a helper since the bumper runs over 100 pounds. Keep a floor jack under it during the lift for safety.\u003c\/p\u003e\n\u003ch3\u003eInstall Manual\u003c\/h3\u003e\n\u003cp\u003eBodyguard ships printed install instructions in the crate. If you need a digital copy, contact our team and we can request one from the factory for your specific fitment.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eBodyguard Freedom rear bumper shell\u003c\/li\u003e\n  \u003cli\u003eBolt-on license plate bracket\u003c\/li\u003e\n  \u003cli\u003eBolt-on step pads\u003c\/li\u003e\n  \u003cli\u003eStainless button-head bolts\u003c\/li\u003e\n  \u003cli\u003eMounting hardware\u003c\/li\u003e\n  \u003cli\u003ePrinted install instructions\u003c\/li\u003e\n  \u003cli\u003eWarranty information\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout Bodyguard\u003c\/h2\u003e\n\u003cp\u003eBodyguard Bumpers is a family-run shop in Paris, Texas that has been building welded steel bumpers for work trucks and off-road rigs for decades. Every Freedom Series bumper is cut, welded, and finished in-house in the USA.\u003c\/p\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eDesigned as a direct replacement for the factory rear bumper on select year, make, and model trucks. \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e when you buy through Truck Bed Barn. Because bumpers are oversized freight and non-returnable once shipped, chat or call our team at (623) 272-6510 before you order so we can confirm year, make, and model against the correct part number. We do not verify by VIN, we verify by your truck's year, make, model, and trim.\u003c\/p\u003e\n\n\u003ch2\u003eShipping\u003c\/h2\u003e\n\u003cp\u003eShips 18-wheeler truck freight on oversized pallets to destinations in the USA. A lift gate or loading dock is recommended since the crate is heavy.\u003c\/p\u003e\n\n\u003cp\u003ePairing the Freedom Rear with a matching front bumper keeps the truck looking right on both ends. See the full lineup in the \u003ca href=\"\/collections\/bodyguard\"\u003eBodyguard collection\u003c\/a\u003e for front bumpers, Freedom Series options, and color-match finishes.\u003c\/p\u003e","brand":"Bodyguard Bumpers","offers":[{"title":"Default Title","offer_id":53333512159531,"sku":null,"price":1895.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/2017-2022_Ford_250-350_-_Freedom_Series_-_Rear_Bumper__29015_1472x700_8eb2e04f-7cb0-4477-bca5-01cd93e12451.jpg?v=1776985743"},{"product_id":"bodyguard-freedom-baja-front-bumper-for-2022-2026-chevrolet-silverado-1500-lbc22a","title":"Bodyguard Freedom Baja Front Bumper | For 2022 to 2026 Chevrolet Silverado 1500","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Bodyguard Freedom Baja is a desert-racing-inspired front replacement bumper built for truck owners who want a prerunner stance with real off-road capability. It sits at the aggressive end of the Freedom lineup with an integrated bull bar, beefed-up light tab array, and a low-profile plate-style face.\u003c\/p\u003e\n\u003cp\u003eThe shell is 10-gauge plate steel with 3\/16\" frame mounts and 3\/4\" shackle mounts, hand-welded at Bodyguard's shop in Paris, Texas. Modular bolt-in mesh and components let you configure the face the way you want, and the low-profile design keeps the bumper in the 125 to 150 pound range so you're not loading the front axle with dead weight.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrerunner-inspired stance\u003c\/strong\u003e Integrated push bar and sculpted wings give the truck an aggressive Baja race look without a full grille guard footprint.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBiggest light setup in the class\u003c\/strong\u003e One of the most configurable lighting arrays on the market, with tab provisions for Rigid SR-series, E-series, D-series cubes, XL Series cubes, and 360-Series 4 inch round lights.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFactory tech still works\u003c\/strong\u003e Compatible with adaptive cruise, factory parking sensors, and engine block heater plugs. The push bar lets you relocate the front camera from the grille into the bumper so lane-keep and trail-cam features keep working.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModular and color-match ready\u003c\/strong\u003e Ships in raw or textured black and can be color-matched to your truck's paint code for a clean OEM-plus finish.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBuilt in the USA\u003c\/strong\u003e Hand-welded in Paris, Texas, and backed by a Limited Lifetime warranty on material and workmanship.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures \u0026amp; Specs\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 10-gauge plate-style steel shell\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrame Mounts:\u003c\/strong\u003e 3\/16 inch steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShackle Mounts:\u003c\/strong\u003e 3\/4 inch thick\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e Approximately 125 to 150 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Raw or textured black powder coat, color-match available\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWinch Compatibility:\u003c\/strong\u003e Competitor product copy lists this as a non-winch-mount bumper, while select Baja SKUs (Ram TRX, Ford Raptor) are pictured with an integrated low-profile winch tray. Call our team before ordering so we confirm whether your specific truck year and trim gets the winch-ready version or the non-winch shell.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLight Mounts:\u003c\/strong\u003e Push bar accepts a 20 inch Rigid SR-series single-row bar, a 30 inch SR-series or E-series bar (single or double row), a 30 inch bar with two D-series cubes, or 8 D-series cubes, 8 XL Series cubes, or 8 360-Series 4 inch round lights.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensor Compatibility:\u003c\/strong\u003e Works with factory parking sensors and adaptive cruise modules\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCamera Ready:\u003c\/strong\u003e Push bar allows relocation of the factory front camera\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Made in Paris, Texas, USA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited Lifetime on workmanship and material. Powder coat finish carries a Limited One Year warranty from original purchase date.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThe Freedom Baja is a bolt-on front replacement that uses your truck's factory frame mounting points. No drilling into the frame. Plan on a few hours in the driveway with a second set of hands because the bumper is heavy and awkward to lift into position on your own. Stainless button-head bolts and all mounting hardware ship in the box.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFreedom Baja front bumper shell\u003c\/li\u003e\n  \u003cli\u003eBolt-on license plate bracket\u003c\/li\u003e\n  \u003cli\u003eStainless button-head bolts\u003c\/li\u003e\n  \u003cli\u003eFrame-mount hardware kit\u003c\/li\u003e\n  \u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll lights, light bars, winches, and winch accessories are sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eAbout Bodyguard Bumpers\u003c\/h2\u003e\n\u003cp\u003eBodyguard Bumpers has been hand-welding truck bumpers in Paris, Texas for years. Every Freedom, Traditional, and A2 bumper is built to order in-house, not outsourced, which is why the fit and finish holds up against daily driving and real off-road use. See the full \u003ca href=\"\/collections\/bodyguard\"\u003eBodyguard collection\u003c\/a\u003e for matching rear bumpers and other front options.\u003c\/p\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eThe Freedom Baja Front is cut specifically for the year, make, and model of truck you select at checkout. Fitment and winch-mount availability vary by truck, so before you order, call or text our team at (623) 272-6510 and we'll confirm the right SKU for your exact truck. \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e when you verify with us first.\u003c\/p\u003e\n\u003cp\u003eShips on an oversized pallet via 18-wheeler freight to destinations inside the USA.\u003c\/p\u003e\n","brand":"Bodyguard Bumpers","offers":[{"title":"Bare Metal \/ with Parking Sensor Cutouts \/ with Camera Harness and Pod","offer_id":53333512651051,"sku":"LBC22AYBNB","price":3170.0,"currency_code":"USD","in_stock":true},{"title":"Textured Black Powder Coat \/ with Parking Sensor Cutouts \/ with Camera Harness and Pod","offer_id":53333512683819,"sku":"LBC22AYTNB","price":3445.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/22-26Chevy1500_1251x698_ab61836b-c72a-472f-92c8-dfdf6a72ab67.jpg?v=1776985744"}],"url":"https:\/\/truckbedbarn.com\/collections\/bodyguard-chevrolet-silverado-1500-bumpers.oembed","provider":"Truck Bed Barn","version":"1.0","type":"link"}