{"title":"Truck Tool Boxes","description":"\u003cp\u003eHeavy-duty aluminum truck tool boxes. Crossover, side mount, and 5th wheel.\u003c\/p\u003e","products":[{"product_id":"undercover-swing-case-truck-bed-toolbox-for-2004-2012-chevrolet-colorado-gmc-canyon","title":"UnderCover Swing Case Truck Bed Toolbox | For 2004 to 2012 Chevrolet Colorado\/GMC Canyon","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UnderCover Swing Case is a \u003cstrong\u003etruck bed toolbox\u003c\/strong\u003e, not a tonneau cover. It mounts to the inner wall of your bed in the dead space between the rear wheel well and the tailgate, then swings out 180 degrees on heavy-duty steel hinges so you can reach your gear without climbing into the bed.\u003c\/p\u003e\n\u003cp\u003eEach Swing Case holds up to 75 pounds of tools, recovery gear, or jobsite supplies without cutting into your usable bed length or minimum width. The composite shell resists corrosion, the weather-sealed lid keeps dust and moisture out, and the key-lockable rotary handle keeps your stuff locked down. Driver-side and passenger-side cases are sold separately, so you can run one or both.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Swing Case Is Different\u003c\/h2\u003e\n\u003cp\u003eMost truck bed toolboxes are crossover boxes that eat up two feet of bed length and force you to load cargo around them. The Swing Case uses a piece of bed real estate that usually sits empty, the space above the wheel well, and turns it into secured storage. Your bed stays open for lumber, coolers, dirt bikes, or whatever else you haul.\u003c\/p\u003e\n\u003cp\u003eThe case also works \u003cstrong\u003eunder any tonneau cover\u003c\/strong\u003e. Pair it with a roll-up, folding, or retractable cover and you get lockable tool storage plus a covered bed. Running an open bed truck is fine too. The heavy-duty lid seal means the Swing Case can stand up to the weather on its own.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSwings Out to You\u003c\/strong\u003e Pull the latch and the case rotates out over the tailgate on steel hinges, so you get full access without leaning into the bed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e75-Pound Capacity\u003c\/strong\u003e Room for tools, recovery straps, tie-downs, jumper cables, a first aid kit, or anything else you want to keep off the bed floor.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLockable Security\u003c\/strong\u003e Key-lockable rotary handle protects tools from theft and keeps the lid latched shut on rough roads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable in Seconds\u003c\/strong\u003e The case lifts off the hinge when you need max bed space or want to carry your tools to the jobsite or a roadside repair.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorks Under a Tonneau\u003c\/strong\u003e Designed to fit beneath UnderCover tonneau covers and most other brands, so you can stack storage and bed protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Specs\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rugged composite (ABS polymer) construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHinges:\u003c\/strong\u003e Heavy-duty steel, 180 degree swing-out\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Method:\u003c\/strong\u003e Key-lockable rotary handle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeather Seal:\u003c\/strong\u003e Heavy-duty lid seal against dust, dirt, and moisture\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e Up to 75 lbs per case\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOuter Dimensions:\u003c\/strong\u003e Upper case 29 in L, lower case 15 in L, 8 in W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInner Dimensions:\u003c\/strong\u003e 15 in max depth, 8 in min depth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Driver-side and passenger-side sold separately\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Proudly assembled in Missouri\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year limited warranty on the ABS polymer structure, lock, hinges, and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is straightforward and typically takes about an hour or less per case. Some drilling is required into the inner bed wall, but all required mounting hardware is included in the box. Most owners handle the install in the driveway with basic hand tools.\u003c\/p\u003e\n\u003ch3\u003eInstall Video\u003c\/h3\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/6M7gMRFIrw8\" title=\"UnderCover Swing Case Truck Bed Toolbox Install\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eOverview Video\u003c\/h2\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/dnXtuwO631s\" title=\"UnderCover Swing Case Truck Bed Toolbox Overview\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSwing Case toolbox (driver-side or passenger-side, per the variant you select)\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty steel hinge mount\u003c\/li\u003e\n  \u003cli\u003eLid seal\u003c\/li\u003e\n  \u003cli\u003eKey-lockable rotary handle with keys\u003c\/li\u003e\n  \u003cli\u003eAll required mounting hardware\u003c\/li\u003e\n  \u003cli\u003eInstall instructions\u003c\/li\u003e\n  \u003cli\u003eWarranty registration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout UnderCover\u003c\/h2\u003e\n\u003cp\u003eUnderCover builds tonneau covers and truck bed storage out of the United States and is part of the RealTruck family. The Swing Case has been a staple of the UnderCover lineup for years and is a favorite among contractors, overlanders, and weekend haulers who need locked storage without giving up a usable bed.\u003c\/p\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eSwing Case fitment is specific to your truck's year, make, model, and side (driver or passenger). Before you order, call or text us at \u003cstrong\u003e(623) 272-6510\u003c\/strong\u003e so we can confirm the correct part number for your truck. \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e when you verify with our team first.\u003c\/p\u003e\n\n\u003cp\u003eLooking for other UnderCover gear? Browse the full \u003ca href=\"\/collections\/undercover\"\u003eUnderCover collection\u003c\/a\u003e for tonneau covers and bed storage that work together.\u003c\/p\u003e","brand":"UnderCover","offers":[{"title":"Driver Side Toolbox","offer_id":53316565172523,"sku":"SC102D","price":179.99,"currency_code":"USD","in_stock":true},{"title":"Passenger Side Toolbox","offer_id":53316565205291,"sku":"SC102P","price":179.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/c9fac2b66a30b4351883cfa709ec3b78_d37aac4a-ad55-4cf6-b57a-6334d41dad3e.jpg?v=1776914587"},{"product_id":"undercover-swing-case-truck-bed-toolbox-for-2022-2026-toyota-tundra","title":"UnderCover Swing Case Truck Bed Toolbox | For 2022 to 2026 Toyota Tundra","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UnderCover Swing Case is a \u003cstrong\u003etruck bed toolbox\u003c\/strong\u003e, not a tonneau cover. It mounts to the inner wall of your bed in the dead space between the rear wheel well and the tailgate, then swings out 180 degrees on heavy-duty steel hinges so you can reach your gear without climbing into the bed.\u003c\/p\u003e\n\u003cp\u003eEach Swing Case holds up to 75 pounds of tools, recovery gear, or jobsite supplies without cutting into your usable bed length or minimum width. The composite shell resists corrosion, the weather-sealed lid keeps dust and moisture out, and the key-lockable rotary handle keeps your stuff locked down. Driver-side and passenger-side cases are sold separately, so you can run one or both.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Swing Case Is Different\u003c\/h2\u003e\n\u003cp\u003eMost truck bed toolboxes are crossover boxes that eat up two feet of bed length and force you to load cargo around them. The Swing Case uses a piece of bed real estate that usually sits empty, the space above the wheel well, and turns it into secured storage. Your bed stays open for lumber, coolers, dirt bikes, or whatever else you haul.\u003c\/p\u003e\n\u003cp\u003eThe case also works \u003cstrong\u003eunder any tonneau cover\u003c\/strong\u003e. Pair it with a roll-up, folding, or retractable cover and you get lockable tool storage plus a covered bed. Running an open bed truck is fine too. The heavy-duty lid seal means the Swing Case can stand up to the weather on its own.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSwings Out to You\u003c\/strong\u003e Pull the latch and the case rotates out over the tailgate on steel hinges, so you get full access without leaning into the bed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e75-Pound Capacity\u003c\/strong\u003e Room for tools, recovery straps, tie-downs, jumper cables, a first aid kit, or anything else you want to keep off the bed floor.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLockable Security\u003c\/strong\u003e Key-lockable rotary handle protects tools from theft and keeps the lid latched shut on rough roads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable in Seconds\u003c\/strong\u003e The case lifts off the hinge when you need max bed space or want to carry your tools to the jobsite or a roadside repair.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorks Under a Tonneau\u003c\/strong\u003e Designed to fit beneath UnderCover tonneau covers and most other brands, so you can stack storage and bed protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Specs\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rugged composite (ABS polymer) construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHinges:\u003c\/strong\u003e Heavy-duty steel, 180 degree swing-out\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Method:\u003c\/strong\u003e Key-lockable rotary handle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeather Seal:\u003c\/strong\u003e Heavy-duty lid seal against dust, dirt, and moisture\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e Up to 75 lbs per case\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOuter Dimensions:\u003c\/strong\u003e Upper case 29 in L, lower case 15 in L, 8 in W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInner Dimensions:\u003c\/strong\u003e 15 in max depth, 8 in min depth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Driver-side and passenger-side sold separately\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Proudly assembled in Missouri\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year limited warranty on the ABS polymer structure, lock, hinges, and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is straightforward and typically takes about an hour or less per case. Some drilling is required into the inner bed wall, but all required mounting hardware is included in the box. Most owners handle the install in the driveway with basic hand tools.\u003c\/p\u003e\n\u003ch3\u003eInstall Video\u003c\/h3\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/6M7gMRFIrw8\" title=\"UnderCover Swing Case Truck Bed Toolbox Install\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eOverview Video\u003c\/h2\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/dnXtuwO631s\" title=\"UnderCover Swing Case Truck Bed Toolbox Overview\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSwing Case toolbox (driver-side or passenger-side, per the variant you select)\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty steel hinge mount\u003c\/li\u003e\n  \u003cli\u003eLid seal\u003c\/li\u003e\n  \u003cli\u003eKey-lockable rotary handle with keys\u003c\/li\u003e\n  \u003cli\u003eAll required mounting hardware\u003c\/li\u003e\n  \u003cli\u003eInstall instructions\u003c\/li\u003e\n  \u003cli\u003eWarranty registration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout UnderCover\u003c\/h2\u003e\n\u003cp\u003eUnderCover builds tonneau covers and truck bed storage out of the United States and is part of the RealTruck family. The Swing Case has been a staple of the UnderCover lineup for years and is a favorite among contractors, overlanders, and weekend haulers who need locked storage without giving up a usable bed.\u003c\/p\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eSwing Case fitment is specific to your truck's year, make, model, and side (driver or passenger). Before you order, call or text us at \u003cstrong\u003e(623) 272-6510\u003c\/strong\u003e so we can confirm the correct part number for your truck. \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e when you verify with our team first.\u003c\/p\u003e\n\n\u003cp\u003eLooking for other UnderCover gear? Browse the full \u003ca href=\"\/collections\/undercover\"\u003eUnderCover collection\u003c\/a\u003e for tonneau covers and bed storage that work together.\u003c\/p\u003e","brand":"UnderCover","offers":[{"title":"Passenger Side Toolbox","offer_id":53316565106987,"sku":"SC404P","price":179.99,"currency_code":"USD","in_stock":true},{"title":"Driver Side Toolbox","offer_id":53316565139755,"sku":"SC404D","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/c9fac2b66a30b4351883cfa709ec3b78.jpg?v=1776914587"},{"product_id":"undercover-swing-case-truck-bed-toolbox","title":"UnderCover Swing Case Truck Bed Toolbox","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UnderCover Swing Case is a \u003cstrong\u003etruck bed toolbox\u003c\/strong\u003e, not a tonneau cover. It mounts to the inner wall of your bed in the dead space between the rear wheel well and the tailgate, then swings out 180 degrees on heavy-duty steel hinges so you can reach your gear without climbing into the bed.\u003c\/p\u003e\n\u003cp\u003eEach Swing Case holds up to 75 pounds of tools, recovery gear, or jobsite supplies without cutting into your usable bed length or minimum width. The composite shell resists corrosion, the weather-sealed lid keeps dust and moisture out, and the key-lockable rotary handle keeps your stuff locked down. Driver-side and passenger-side cases are sold separately, so you can run one or both.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Swing Case Is Different\u003c\/h2\u003e\n\u003cp\u003eMost truck bed toolboxes are crossover boxes that eat up two feet of bed length and force you to load cargo around them. The Swing Case uses a piece of bed real estate that usually sits empty, the space above the wheel well, and turns it into secured storage. Your bed stays open for lumber, coolers, dirt bikes, or whatever else you haul.\u003c\/p\u003e\n\u003cp\u003eThe case also works \u003cstrong\u003eunder any tonneau cover\u003c\/strong\u003e. Pair it with a roll-up, folding, or retractable cover and you get lockable tool storage plus a covered bed. Running an open bed truck is fine too. The heavy-duty lid seal means the Swing Case can stand up to the weather on its own.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSwings Out to You\u003c\/strong\u003e Pull the latch and the case rotates out over the tailgate on steel hinges, so you get full access without leaning into the bed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e75-Pound Capacity\u003c\/strong\u003e Room for tools, recovery straps, tie-downs, jumper cables, a first aid kit, or anything else you want to keep off the bed floor.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLockable Security\u003c\/strong\u003e Key-lockable rotary handle protects tools from theft and keeps the lid latched shut on rough roads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable in Seconds\u003c\/strong\u003e The case lifts off the hinge when you need max bed space or want to carry your tools to the jobsite or a roadside repair.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorks Under a Tonneau\u003c\/strong\u003e Designed to fit beneath UnderCover tonneau covers and most other brands, so you can stack storage and bed protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Specs\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rugged composite (ABS polymer) construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHinges:\u003c\/strong\u003e Heavy-duty steel, 180 degree swing-out\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Method:\u003c\/strong\u003e Key-lockable rotary handle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeather Seal:\u003c\/strong\u003e Heavy-duty lid seal against dust, dirt, and moisture\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e Up to 75 lbs per case\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOuter Dimensions:\u003c\/strong\u003e Upper case 29 in L, lower case 15 in L, 8 in W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInner Dimensions:\u003c\/strong\u003e 15 in max depth, 8 in min depth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Driver-side and passenger-side sold separately\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Proudly assembled in Missouri\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year limited warranty on the ABS polymer structure, lock, hinges, and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is straightforward and typically takes about an hour or less per case. Some drilling is required into the inner bed wall, but all required mounting hardware is included in the box. Most owners handle the install in the driveway with basic hand tools.\u003c\/p\u003e\n\u003ch3\u003eInstall Video\u003c\/h3\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/6M7gMRFIrw8\" title=\"UnderCover Swing Case Truck Bed Toolbox Install\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eOverview Video\u003c\/h2\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/dnXtuwO631s\" title=\"UnderCover Swing Case Truck Bed Toolbox Overview\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSwing Case toolbox (driver-side or passenger-side, per the variant you select)\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty steel hinge mount\u003c\/li\u003e\n  \u003cli\u003eLid seal\u003c\/li\u003e\n  \u003cli\u003eKey-lockable rotary handle with keys\u003c\/li\u003e\n  \u003cli\u003eAll required mounting hardware\u003c\/li\u003e\n  \u003cli\u003eInstall instructions\u003c\/li\u003e\n  \u003cli\u003eWarranty registration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout UnderCover\u003c\/h2\u003e\n\u003cp\u003eUnderCover builds tonneau covers and truck bed storage out of the United States and is part of the RealTruck family. The Swing Case has been a staple of the UnderCover lineup for years and is a favorite among contractors, overlanders, and weekend haulers who need locked storage without giving up a usable bed.\u003c\/p\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eSwing Case fitment is specific to your truck's year, make, model, and side (driver or passenger). Before you order, call or text us at \u003cstrong\u003e(623) 272-6510\u003c\/strong\u003e so we can confirm the correct part number for your truck. \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e when you verify with our team first.\u003c\/p\u003e\n\n\u003cp\u003eLooking for other UnderCover gear? Browse the full \u003ca href=\"\/collections\/undercover\"\u003eUnderCover collection\u003c\/a\u003e for tonneau covers and bed storage that work together.\u003c\/p\u003e","brand":"UnderCover","offers":[{"title":"Default Title","offer_id":53316568383787,"sku":null,"price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/c9fac2b66a30b4351883cfa709ec3b78_aae4b1d3-c2cd-491f-bc02-153d1a35e974.jpg?v=1776914593"},{"product_id":"undercover-swing-case-truck-bed-toolbox-for-2020-2026-chevrolet-silverado-gmc-sierra-2500-3500","title":"UnderCover Swing Case Truck Bed Toolbox | For 20-26 Chevrolet Silverado\/GMC Sierra 2500\/3500","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UnderCover Swing Case is a \u003cstrong\u003etruck bed toolbox\u003c\/strong\u003e, not a tonneau cover. It mounts to the inner wall of your bed in the dead space between the rear wheel well and the tailgate, then swings out 180 degrees on heavy-duty steel hinges so you can reach your gear without climbing into the bed.\u003c\/p\u003e\n\u003cp\u003eEach Swing Case holds up to 75 pounds of tools, recovery gear, or jobsite supplies without cutting into your usable bed length or minimum width. The composite shell resists corrosion, the weather-sealed lid keeps dust and moisture out, and the key-lockable rotary handle keeps your stuff locked down. Driver-side and passenger-side cases are sold separately, so you can run one or both.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Swing Case Is Different\u003c\/h2\u003e\n\u003cp\u003eMost truck bed toolboxes are crossover boxes that eat up two feet of bed length and force you to load cargo around them. The Swing Case uses a piece of bed real estate that usually sits empty, the space above the wheel well, and turns it into secured storage. Your bed stays open for lumber, coolers, dirt bikes, or whatever else you haul.\u003c\/p\u003e\n\u003cp\u003eThe case also works \u003cstrong\u003eunder any tonneau cover\u003c\/strong\u003e. Pair it with a roll-up, folding, or retractable cover and you get lockable tool storage plus a covered bed. Running an open bed truck is fine too. The heavy-duty lid seal means the Swing Case can stand up to the weather on its own.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSwings Out to You\u003c\/strong\u003e Pull the latch and the case rotates out over the tailgate on steel hinges, so you get full access without leaning into the bed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e75-Pound Capacity\u003c\/strong\u003e Room for tools, recovery straps, tie-downs, jumper cables, a first aid kit, or anything else you want to keep off the bed floor.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLockable Security\u003c\/strong\u003e Key-lockable rotary handle protects tools from theft and keeps the lid latched shut on rough roads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable in Seconds\u003c\/strong\u003e The case lifts off the hinge when you need max bed space or want to carry your tools to the jobsite or a roadside repair.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorks Under a Tonneau\u003c\/strong\u003e Designed to fit beneath UnderCover tonneau covers and most other brands, so you can stack storage and bed protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Specs\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rugged composite (ABS polymer) construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHinges:\u003c\/strong\u003e Heavy-duty steel, 180 degree swing-out\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Method:\u003c\/strong\u003e Key-lockable rotary handle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeather Seal:\u003c\/strong\u003e Heavy-duty lid seal against dust, dirt, and moisture\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e Up to 75 lbs per case\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOuter Dimensions:\u003c\/strong\u003e Upper case 29 in L, lower case 15 in L, 8 in W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInner Dimensions:\u003c\/strong\u003e 15 in max depth, 8 in min depth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Driver-side and passenger-side sold separately\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Proudly assembled in Missouri\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year limited warranty on the ABS polymer structure, lock, hinges, and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is straightforward and typically takes about an hour or less per case. Some drilling is required into the inner bed wall, but all required mounting hardware is included in the box. Most owners handle the install in the driveway with basic hand tools.\u003c\/p\u003e\n\u003ch3\u003eInstall Video\u003c\/h3\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/6M7gMRFIrw8\" title=\"UnderCover Swing Case Truck Bed Toolbox Install\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eOverview Video\u003c\/h2\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/dnXtuwO631s\" title=\"UnderCover Swing Case Truck Bed Toolbox Overview\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSwing Case toolbox (driver-side or passenger-side, per the variant you select)\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty steel hinge mount\u003c\/li\u003e\n  \u003cli\u003eLid seal\u003c\/li\u003e\n  \u003cli\u003eKey-lockable rotary handle with keys\u003c\/li\u003e\n  \u003cli\u003eAll required mounting hardware\u003c\/li\u003e\n  \u003cli\u003eInstall instructions\u003c\/li\u003e\n  \u003cli\u003eWarranty registration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout UnderCover\u003c\/h2\u003e\n\u003cp\u003eUnderCover builds tonneau covers and truck bed storage out of the United States and is part of the RealTruck family. The Swing Case has been a staple of the UnderCover lineup for years and is a favorite among contractors, overlanders, and weekend haulers who need locked storage without giving up a usable bed.\u003c\/p\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eSwing Case fitment is specific to your truck's year, make, model, and side (driver or passenger). Before you order, call or text us at \u003cstrong\u003e(623) 272-6510\u003c\/strong\u003e so we can confirm the correct part number for your truck. \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e when you verify with our team first.\u003c\/p\u003e\n\n\u003cp\u003eLooking for other UnderCover gear? Browse the full \u003ca href=\"\/collections\/undercover\"\u003eUnderCover collection\u003c\/a\u003e for tonneau covers and bed storage that work together.\u003c\/p\u003e","brand":"UnderCover","offers":[{"title":"Driver Side Toolbox","offer_id":53316570022187,"sku":"SC105D","price":179.99,"currency_code":"USD","in_stock":true},{"title":"Passenger Side Toolbox","offer_id":53316570054955,"sku":"SC105P","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/c9fac2b66a30b4351883cfa709ec3b78_091d8eb7-6415-4be1-8af5-72b91098149e.jpg?v=1776914595"},{"product_id":"undercover-swing-case-truck-bed-toolbox-for-2022-2026-ford-maverick","title":"UnderCover Swing Case Truck Bed Toolbox | For 2022 to 2026 Ford Maverick","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UnderCover Swing Case is a \u003cstrong\u003etruck bed toolbox\u003c\/strong\u003e, not a tonneau cover. It mounts to the inner wall of your bed in the dead space between the rear wheel well and the tailgate, then swings out 180 degrees on heavy-duty steel hinges so you can reach your gear without climbing into the bed.\u003c\/p\u003e\n\u003cp\u003eEach Swing Case holds up to 75 pounds of tools, recovery gear, or jobsite supplies without cutting into your usable bed length or minimum width. The composite shell resists corrosion, the weather-sealed lid keeps dust and moisture out, and the key-lockable rotary handle keeps your stuff locked down. Driver-side and passenger-side cases are sold separately, so you can run one or both.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Swing Case Is Different\u003c\/h2\u003e\n\u003cp\u003eMost truck bed toolboxes are crossover boxes that eat up two feet of bed length and force you to load cargo around them. The Swing Case uses a piece of bed real estate that usually sits empty, the space above the wheel well, and turns it into secured storage. Your bed stays open for lumber, coolers, dirt bikes, or whatever else you haul.\u003c\/p\u003e\n\u003cp\u003eThe case also works \u003cstrong\u003eunder any tonneau cover\u003c\/strong\u003e. Pair it with a roll-up, folding, or retractable cover and you get lockable tool storage plus a covered bed. Running an open bed truck is fine too. The heavy-duty lid seal means the Swing Case can stand up to the weather on its own.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSwings Out to You\u003c\/strong\u003e Pull the latch and the case rotates out over the tailgate on steel hinges, so you get full access without leaning into the bed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e75-Pound Capacity\u003c\/strong\u003e Room for tools, recovery straps, tie-downs, jumper cables, a first aid kit, or anything else you want to keep off the bed floor.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLockable Security\u003c\/strong\u003e Key-lockable rotary handle protects tools from theft and keeps the lid latched shut on rough roads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable in Seconds\u003c\/strong\u003e The case lifts off the hinge when you need max bed space or want to carry your tools to the jobsite or a roadside repair.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorks Under a Tonneau\u003c\/strong\u003e Designed to fit beneath UnderCover tonneau covers and most other brands, so you can stack storage and bed protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Specs\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rugged composite (ABS polymer) construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHinges:\u003c\/strong\u003e Heavy-duty steel, 180 degree swing-out\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Method:\u003c\/strong\u003e Key-lockable rotary handle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeather Seal:\u003c\/strong\u003e Heavy-duty lid seal against dust, dirt, and moisture\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e Up to 75 lbs per case\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOuter Dimensions:\u003c\/strong\u003e Upper case 29 in L, lower case 15 in L, 8 in W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInner Dimensions:\u003c\/strong\u003e 15 in max depth, 8 in min depth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Driver-side and passenger-side sold separately\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Proudly assembled in Missouri\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year limited warranty on the ABS polymer structure, lock, hinges, and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is straightforward and typically takes about an hour or less per case. Some drilling is required into the inner bed wall, but all required mounting hardware is included in the box. Most owners handle the install in the driveway with basic hand tools.\u003c\/p\u003e\n\u003ch3\u003eInstall Video\u003c\/h3\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/6M7gMRFIrw8\" title=\"UnderCover Swing Case Truck Bed Toolbox Install\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eOverview Video\u003c\/h2\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/dnXtuwO631s\" title=\"UnderCover Swing Case Truck Bed Toolbox Overview\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSwing Case toolbox (driver-side or passenger-side, per the variant you select)\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty steel hinge mount\u003c\/li\u003e\n  \u003cli\u003eLid seal\u003c\/li\u003e\n  \u003cli\u003eKey-lockable rotary handle with keys\u003c\/li\u003e\n  \u003cli\u003eAll required mounting hardware\u003c\/li\u003e\n  \u003cli\u003eInstall instructions\u003c\/li\u003e\n  \u003cli\u003eWarranty registration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout UnderCover\u003c\/h2\u003e\n\u003cp\u003eUnderCover builds tonneau covers and truck bed storage out of the United States and is part of the RealTruck family. The Swing Case has been a staple of the UnderCover lineup for years and is a favorite among contractors, overlanders, and weekend haulers who need locked storage without giving up a usable bed.\u003c\/p\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eSwing Case fitment is specific to your truck's year, make, model, and side (driver or passenger). Before you order, call or text us at \u003cstrong\u003e(623) 272-6510\u003c\/strong\u003e so we can confirm the correct part number for your truck. \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e when you verify with our team first.\u003c\/p\u003e\n\n\u003cp\u003eLooking for other UnderCover gear? Browse the full \u003ca href=\"\/collections\/undercover\"\u003eUnderCover collection\u003c\/a\u003e for tonneau covers and bed storage that work together.\u003c\/p\u003e","brand":"UnderCover","offers":[{"title":"Passenger Side Toolbox","offer_id":53316573135147,"sku":"SC207P","price":179.99,"currency_code":"USD","in_stock":false},{"title":"Driver Side Toolbox","offer_id":53316573167915,"sku":"SC207D","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/c9fac2b66a30b4351883cfa709ec3b78_6671e88f-bcd3-4260-8c1e-120817aeae6a.jpg?v=1776914601"},{"product_id":"undercover-swing-case-truck-bed-toolbox-for-2015-2022-chevrolet-colorado-gmc-canyon","title":"UnderCover Swing Case Truck Bed Toolbox | For 2015 to 2022 Chevrolet Colorado\/GMC Canyon","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UnderCover Swing Case is a \u003cstrong\u003etruck bed toolbox\u003c\/strong\u003e, not a tonneau cover. It mounts to the inner wall of your bed in the dead space between the rear wheel well and the tailgate, then swings out 180 degrees on heavy-duty steel hinges so you can reach your gear without climbing into the bed.\u003c\/p\u003e\n\u003cp\u003eEach Swing Case holds up to 75 pounds of tools, recovery gear, or jobsite supplies without cutting into your usable bed length or minimum width. The composite shell resists corrosion, the weather-sealed lid keeps dust and moisture out, and the key-lockable rotary handle keeps your stuff locked down. Driver-side and passenger-side cases are sold separately, so you can run one or both.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Swing Case Is Different\u003c\/h2\u003e\n\u003cp\u003eMost truck bed toolboxes are crossover boxes that eat up two feet of bed length and force you to load cargo around them. The Swing Case uses a piece of bed real estate that usually sits empty, the space above the wheel well, and turns it into secured storage. Your bed stays open for lumber, coolers, dirt bikes, or whatever else you haul.\u003c\/p\u003e\n\u003cp\u003eThe case also works \u003cstrong\u003eunder any tonneau cover\u003c\/strong\u003e. Pair it with a roll-up, folding, or retractable cover and you get lockable tool storage plus a covered bed. Running an open bed truck is fine too. The heavy-duty lid seal means the Swing Case can stand up to the weather on its own.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSwings Out to You\u003c\/strong\u003e Pull the latch and the case rotates out over the tailgate on steel hinges, so you get full access without leaning into the bed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e75-Pound Capacity\u003c\/strong\u003e Room for tools, recovery straps, tie-downs, jumper cables, a first aid kit, or anything else you want to keep off the bed floor.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLockable Security\u003c\/strong\u003e Key-lockable rotary handle protects tools from theft and keeps the lid latched shut on rough roads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable in Seconds\u003c\/strong\u003e The case lifts off the hinge when you need max bed space or want to carry your tools to the jobsite or a roadside repair.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorks Under a Tonneau\u003c\/strong\u003e Designed to fit beneath UnderCover tonneau covers and most other brands, so you can stack storage and bed protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Specs\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rugged composite (ABS polymer) construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHinges:\u003c\/strong\u003e Heavy-duty steel, 180 degree swing-out\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Method:\u003c\/strong\u003e Key-lockable rotary handle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeather Seal:\u003c\/strong\u003e Heavy-duty lid seal against dust, dirt, and moisture\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e Up to 75 lbs per case\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOuter Dimensions:\u003c\/strong\u003e Upper case 29 in L, lower case 15 in L, 8 in W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInner Dimensions:\u003c\/strong\u003e 15 in max depth, 8 in min depth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Driver-side and passenger-side sold separately\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Proudly assembled in Missouri\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year limited warranty on the ABS polymer structure, lock, hinges, and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is straightforward and typically takes about an hour or less per case. Some drilling is required into the inner bed wall, but all required mounting hardware is included in the box. Most owners handle the install in the driveway with basic hand tools.\u003c\/p\u003e\n\u003ch3\u003eInstall Video\u003c\/h3\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/6M7gMRFIrw8\" title=\"UnderCover Swing Case Truck Bed Toolbox Install\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eOverview Video\u003c\/h2\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/dnXtuwO631s\" title=\"UnderCover Swing Case Truck Bed Toolbox Overview\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSwing Case toolbox (driver-side or passenger-side, per the variant you select)\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty steel hinge mount\u003c\/li\u003e\n  \u003cli\u003eLid seal\u003c\/li\u003e\n  \u003cli\u003eKey-lockable rotary handle with keys\u003c\/li\u003e\n  \u003cli\u003eAll required mounting hardware\u003c\/li\u003e\n  \u003cli\u003eInstall instructions\u003c\/li\u003e\n  \u003cli\u003eWarranty registration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout UnderCover\u003c\/h2\u003e\n\u003cp\u003eUnderCover builds tonneau covers and truck bed storage out of the United States and is part of the RealTruck family. The Swing Case has been a staple of the UnderCover lineup for years and is a favorite among contractors, overlanders, and weekend haulers who need locked storage without giving up a usable bed.\u003c\/p\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eSwing Case fitment is specific to your truck's year, make, model, and side (driver or passenger). Before you order, call or text us at \u003cstrong\u003e(623) 272-6510\u003c\/strong\u003e so we can confirm the correct part number for your truck. \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e when you verify with our team first.\u003c\/p\u003e\n\n\u003cp\u003eLooking for other UnderCover gear? Browse the full \u003ca href=\"\/collections\/undercover\"\u003eUnderCover collection\u003c\/a\u003e for tonneau covers and bed storage that work together.\u003c\/p\u003e","brand":"UnderCover","offers":[{"title":"Passenger Side Toolbox","offer_id":53316575461675,"sku":"SC103P","price":179.99,"currency_code":"USD","in_stock":true},{"title":"Driver Side Toolbox","offer_id":53316575494443,"sku":"SC103D","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/c9fac2b66a30b4351883cfa709ec3b78_736c06f0-d8ec-4ac7-b8b2-f00fdbeccb82.jpg?v=1776914605"},{"product_id":"undercover-swing-case-truck-bed-toolbox-for-2019-2023-ford-ranger","title":"UnderCover Swing Case Truck Bed Toolbox | For 2019 to 2023 Ford Ranger","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UnderCover Swing Case is a \u003cstrong\u003etruck bed toolbox\u003c\/strong\u003e, not a tonneau cover. It mounts to the inner wall of your bed in the dead space between the rear wheel well and the tailgate, then swings out 180 degrees on heavy-duty steel hinges so you can reach your gear without climbing into the bed.\u003c\/p\u003e\n\u003cp\u003eEach Swing Case holds up to 75 pounds of tools, recovery gear, or jobsite supplies without cutting into your usable bed length or minimum width. The composite shell resists corrosion, the weather-sealed lid keeps dust and moisture out, and the key-lockable rotary handle keeps your stuff locked down. Driver-side and passenger-side cases are sold separately, so you can run one or both.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Swing Case Is Different\u003c\/h2\u003e\n\u003cp\u003eMost truck bed toolboxes are crossover boxes that eat up two feet of bed length and force you to load cargo around them. The Swing Case uses a piece of bed real estate that usually sits empty, the space above the wheel well, and turns it into secured storage. Your bed stays open for lumber, coolers, dirt bikes, or whatever else you haul.\u003c\/p\u003e\n\u003cp\u003eThe case also works \u003cstrong\u003eunder any tonneau cover\u003c\/strong\u003e. Pair it with a roll-up, folding, or retractable cover and you get lockable tool storage plus a covered bed. Running an open bed truck is fine too. The heavy-duty lid seal means the Swing Case can stand up to the weather on its own.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSwings Out to You\u003c\/strong\u003e Pull the latch and the case rotates out over the tailgate on steel hinges, so you get full access without leaning into the bed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e75-Pound Capacity\u003c\/strong\u003e Room for tools, recovery straps, tie-downs, jumper cables, a first aid kit, or anything else you want to keep off the bed floor.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLockable Security\u003c\/strong\u003e Key-lockable rotary handle protects tools from theft and keeps the lid latched shut on rough roads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable in Seconds\u003c\/strong\u003e The case lifts off the hinge when you need max bed space or want to carry your tools to the jobsite or a roadside repair.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorks Under a Tonneau\u003c\/strong\u003e Designed to fit beneath UnderCover tonneau covers and most other brands, so you can stack storage and bed protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Specs\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rugged composite (ABS polymer) construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHinges:\u003c\/strong\u003e Heavy-duty steel, 180 degree swing-out\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Method:\u003c\/strong\u003e Key-lockable rotary handle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeather Seal:\u003c\/strong\u003e Heavy-duty lid seal against dust, dirt, and moisture\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e Up to 75 lbs per case\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOuter Dimensions:\u003c\/strong\u003e Upper case 29 in L, lower case 15 in L, 8 in W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInner Dimensions:\u003c\/strong\u003e 15 in max depth, 8 in min depth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Driver-side and passenger-side sold separately\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Proudly assembled in Missouri\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year limited warranty on the ABS polymer structure, lock, hinges, and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is straightforward and typically takes about an hour or less per case. Some drilling is required into the inner bed wall, but all required mounting hardware is included in the box. Most owners handle the install in the driveway with basic hand tools.\u003c\/p\u003e\n\u003ch3\u003eInstall Video\u003c\/h3\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/6M7gMRFIrw8\" title=\"UnderCover Swing Case Truck Bed Toolbox Install\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eOverview Video\u003c\/h2\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/dnXtuwO631s\" title=\"UnderCover Swing Case Truck Bed Toolbox Overview\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSwing Case toolbox (driver-side or passenger-side, per the variant you select)\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty steel hinge mount\u003c\/li\u003e\n  \u003cli\u003eLid seal\u003c\/li\u003e\n  \u003cli\u003eKey-lockable rotary handle with keys\u003c\/li\u003e\n  \u003cli\u003eAll required mounting hardware\u003c\/li\u003e\n  \u003cli\u003eInstall instructions\u003c\/li\u003e\n  \u003cli\u003eWarranty registration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout UnderCover\u003c\/h2\u003e\n\u003cp\u003eUnderCover builds tonneau covers and truck bed storage out of the United States and is part of the RealTruck family. The Swing Case has been a staple of the UnderCover lineup for years and is a favorite among contractors, overlanders, and weekend haulers who need locked storage without giving up a usable bed.\u003c\/p\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eSwing Case fitment is specific to your truck's year, make, model, and side (driver or passenger). Before you order, call or text us at \u003cstrong\u003e(623) 272-6510\u003c\/strong\u003e so we can confirm the correct part number for your truck. \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e when you verify with our team first.\u003c\/p\u003e\n\n\u003cp\u003eLooking for other UnderCover gear? Browse the full \u003ca href=\"\/collections\/undercover\"\u003eUnderCover collection\u003c\/a\u003e for tonneau covers and bed storage that work together.\u003c\/p\u003e","brand":"UnderCover","offers":[{"title":"Driver Side Toolbox","offer_id":53316576411947,"sku":"SC206D","price":179.99,"currency_code":"USD","in_stock":true},{"title":"Passenger Side Toolbox","offer_id":53316576444715,"sku":"SC206P","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/c9fac2b66a30b4351883cfa709ec3b78_28e1c217-0f94-496c-b459-a0b62f60257e.jpg?v=1776914606"},{"product_id":"undercover-swing-case-truck-bed-toolbox-for-2019-2026-chevrolet-silverado-gmc-sierra-1500","title":"UnderCover Swing Case Truck Bed Toolbox | For 19-26 Chevrolet Silverado\/GMC Sierra 1500","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UnderCover Swing Case is a \u003cstrong\u003etruck bed toolbox\u003c\/strong\u003e, not a tonneau cover. It mounts to the inner wall of your bed in the dead space between the rear wheel well and the tailgate, then swings out 180 degrees on heavy-duty steel hinges so you can reach your gear without climbing into the bed.\u003c\/p\u003e\n\u003cp\u003eEach Swing Case holds up to 75 pounds of tools, recovery gear, or jobsite supplies without cutting into your usable bed length or minimum width. The composite shell resists corrosion, the weather-sealed lid keeps dust and moisture out, and the key-lockable rotary handle keeps your stuff locked down. Driver-side and passenger-side cases are sold separately, so you can run one or both.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Swing Case Is Different\u003c\/h2\u003e\n\u003cp\u003eMost truck bed toolboxes are crossover boxes that eat up two feet of bed length and force you to load cargo around them. The Swing Case uses a piece of bed real estate that usually sits empty, the space above the wheel well, and turns it into secured storage. Your bed stays open for lumber, coolers, dirt bikes, or whatever else you haul.\u003c\/p\u003e\n\u003cp\u003eThe case also works \u003cstrong\u003eunder any tonneau cover\u003c\/strong\u003e. Pair it with a roll-up, folding, or retractable cover and you get lockable tool storage plus a covered bed. Running an open bed truck is fine too. The heavy-duty lid seal means the Swing Case can stand up to the weather on its own.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSwings Out to You\u003c\/strong\u003e Pull the latch and the case rotates out over the tailgate on steel hinges, so you get full access without leaning into the bed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e75-Pound Capacity\u003c\/strong\u003e Room for tools, recovery straps, tie-downs, jumper cables, a first aid kit, or anything else you want to keep off the bed floor.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLockable Security\u003c\/strong\u003e Key-lockable rotary handle protects tools from theft and keeps the lid latched shut on rough roads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable in Seconds\u003c\/strong\u003e The case lifts off the hinge when you need max bed space or want to carry your tools to the jobsite or a roadside repair.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorks Under a Tonneau\u003c\/strong\u003e Designed to fit beneath UnderCover tonneau covers and most other brands, so you can stack storage and bed protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Specs\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rugged composite (ABS polymer) construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHinges:\u003c\/strong\u003e Heavy-duty steel, 180 degree swing-out\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Method:\u003c\/strong\u003e Key-lockable rotary handle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeather Seal:\u003c\/strong\u003e Heavy-duty lid seal against dust, dirt, and moisture\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e Up to 75 lbs per case\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOuter Dimensions:\u003c\/strong\u003e Upper case 29 in L, lower case 15 in L, 8 in W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInner Dimensions:\u003c\/strong\u003e 15 in max depth, 8 in min depth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Driver-side and passenger-side sold separately\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Proudly assembled in Missouri\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year limited warranty on the ABS polymer structure, lock, hinges, and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is straightforward and typically takes about an hour or less per case. Some drilling is required into the inner bed wall, but all required mounting hardware is included in the box. Most owners handle the install in the driveway with basic hand tools.\u003c\/p\u003e\n\u003ch3\u003eInstall Video\u003c\/h3\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/6M7gMRFIrw8\" title=\"UnderCover Swing Case Truck Bed Toolbox Install\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eOverview Video\u003c\/h2\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/dnXtuwO631s\" title=\"UnderCover Swing Case Truck Bed Toolbox Overview\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSwing Case toolbox (driver-side or passenger-side, per the variant you select)\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty steel hinge mount\u003c\/li\u003e\n  \u003cli\u003eLid seal\u003c\/li\u003e\n  \u003cli\u003eKey-lockable rotary handle with keys\u003c\/li\u003e\n  \u003cli\u003eAll required mounting hardware\u003c\/li\u003e\n  \u003cli\u003eInstall instructions\u003c\/li\u003e\n  \u003cli\u003eWarranty registration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout UnderCover\u003c\/h2\u003e\n\u003cp\u003eUnderCover builds tonneau covers and truck bed storage out of the United States and is part of the RealTruck family. The Swing Case has been a staple of the UnderCover lineup for years and is a favorite among contractors, overlanders, and weekend haulers who need locked storage without giving up a usable bed.\u003c\/p\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eSwing Case fitment is specific to your truck's year, make, model, and side (driver or passenger). Before you order, call or text us at \u003cstrong\u003e(623) 272-6510\u003c\/strong\u003e so we can confirm the correct part number for your truck. \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e when you verify with our team first.\u003c\/p\u003e\n\n\u003cp\u003eLooking for other UnderCover gear? Browse the full \u003ca href=\"\/collections\/undercover\"\u003eUnderCover collection\u003c\/a\u003e for tonneau covers and bed storage that work together.\u003c\/p\u003e","brand":"UnderCover","offers":[{"title":"Driver Side Toolbox","offer_id":53316576510251,"sku":"SC104D","price":179.99,"currency_code":"USD","in_stock":true},{"title":"Passenger Side Toolbox","offer_id":53316576543019,"sku":"SC104P","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/c9fac2b66a30b4351883cfa709ec3b78_36f9cde0-2c36-405f-bfad-11d0bff92d0e.jpg?v=1776914606"},{"product_id":"undercover-swing-case-truck-bed-toolbox-for-2019-2026-ram-1500","title":"UnderCover Swing Case Truck Bed Toolbox | For 2019 to 2026 RAM 1500","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UnderCover Swing Case is a \u003cstrong\u003etruck bed toolbox\u003c\/strong\u003e, not a tonneau cover. It mounts to the inner wall of your bed in the dead space between the rear wheel well and the tailgate, then swings out 180 degrees on heavy-duty steel hinges so you can reach your gear without climbing into the bed.\u003c\/p\u003e\n\u003cp\u003eEach Swing Case holds up to 75 pounds of tools, recovery gear, or jobsite supplies without cutting into your usable bed length or minimum width. The composite shell resists corrosion, the weather-sealed lid keeps dust and moisture out, and the key-lockable rotary handle keeps your stuff locked down. Driver-side and passenger-side cases are sold separately, so you can run one or both.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Swing Case Is Different\u003c\/h2\u003e\n\u003cp\u003eMost truck bed toolboxes are crossover boxes that eat up two feet of bed length and force you to load cargo around them. The Swing Case uses a piece of bed real estate that usually sits empty, the space above the wheel well, and turns it into secured storage. Your bed stays open for lumber, coolers, dirt bikes, or whatever else you haul.\u003c\/p\u003e\n\u003cp\u003eThe case also works \u003cstrong\u003eunder any tonneau cover\u003c\/strong\u003e. Pair it with a roll-up, folding, or retractable cover and you get lockable tool storage plus a covered bed. Running an open bed truck is fine too. The heavy-duty lid seal means the Swing Case can stand up to the weather on its own.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSwings Out to You\u003c\/strong\u003e Pull the latch and the case rotates out over the tailgate on steel hinges, so you get full access without leaning into the bed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e75-Pound Capacity\u003c\/strong\u003e Room for tools, recovery straps, tie-downs, jumper cables, a first aid kit, or anything else you want to keep off the bed floor.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLockable Security\u003c\/strong\u003e Key-lockable rotary handle protects tools from theft and keeps the lid latched shut on rough roads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable in Seconds\u003c\/strong\u003e The case lifts off the hinge when you need max bed space or want to carry your tools to the jobsite or a roadside repair.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorks Under a Tonneau\u003c\/strong\u003e Designed to fit beneath UnderCover tonneau covers and most other brands, so you can stack storage and bed protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Specs\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rugged composite (ABS polymer) construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHinges:\u003c\/strong\u003e Heavy-duty steel, 180 degree swing-out\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Method:\u003c\/strong\u003e Key-lockable rotary handle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeather Seal:\u003c\/strong\u003e Heavy-duty lid seal against dust, dirt, and moisture\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e Up to 75 lbs per case\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOuter Dimensions:\u003c\/strong\u003e Upper case 29 in L, lower case 15 in L, 8 in W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInner Dimensions:\u003c\/strong\u003e 15 in max depth, 8 in min depth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Driver-side and passenger-side sold separately\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Proudly assembled in Missouri\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year limited warranty on the ABS polymer structure, lock, hinges, and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is straightforward and typically takes about an hour or less per case. Some drilling is required into the inner bed wall, but all required mounting hardware is included in the box. Most owners handle the install in the driveway with basic hand tools.\u003c\/p\u003e\n\u003ch3\u003eInstall Video\u003c\/h3\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/6M7gMRFIrw8\" title=\"UnderCover Swing Case Truck Bed Toolbox Install\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eOverview Video\u003c\/h2\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/dnXtuwO631s\" title=\"UnderCover Swing Case Truck Bed Toolbox Overview\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSwing Case toolbox (driver-side or passenger-side, per the variant you select)\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty steel hinge mount\u003c\/li\u003e\n  \u003cli\u003eLid seal\u003c\/li\u003e\n  \u003cli\u003eKey-lockable rotary handle with keys\u003c\/li\u003e\n  \u003cli\u003eAll required mounting hardware\u003c\/li\u003e\n  \u003cli\u003eInstall instructions\u003c\/li\u003e\n  \u003cli\u003eWarranty registration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout UnderCover\u003c\/h2\u003e\n\u003cp\u003eUnderCover builds tonneau covers and truck bed storage out of the United States and is part of the RealTruck family. The Swing Case has been a staple of the UnderCover lineup for years and is a favorite among contractors, overlanders, and weekend haulers who need locked storage without giving up a usable bed.\u003c\/p\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eSwing Case fitment is specific to your truck's year, make, model, and side (driver or passenger). Before you order, call or text us at \u003cstrong\u003e(623) 272-6510\u003c\/strong\u003e so we can confirm the correct part number for your truck. \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e when you verify with our team first.\u003c\/p\u003e\n\n\u003cp\u003eLooking for other UnderCover gear? Browse the full \u003ca href=\"\/collections\/undercover\"\u003eUnderCover collection\u003c\/a\u003e for tonneau covers and bed storage that work together.\u003c\/p\u003e","brand":"UnderCover","offers":[{"title":"Driver Side Toolbox","offer_id":53316576936235,"sku":"SC302D","price":179.99,"currency_code":"USD","in_stock":true},{"title":"Passenger Side Toolbox","offer_id":53316576969003,"sku":"SC302P","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/c9fac2b66a30b4351883cfa709ec3b78_49e97f38-7e38-452e-aa0a-f1f0d00ba642.jpg?v=1776914607"},{"product_id":"undercover-swing-case-truck-bed-toolbox-for-1999-2006-chevrolet-silverado-gmc-sierra-1500-2500-3500","title":"UnderCover Swing Case Truck Bed Toolbox | For 99-06 Chevrolet Silverado\/GMC Sierra 1500\/2500\/3500","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UnderCover Swing Case is a \u003cstrong\u003etruck bed toolbox\u003c\/strong\u003e, not a tonneau cover. It mounts to the inner wall of your bed in the dead space between the rear wheel well and the tailgate, then swings out 180 degrees on heavy-duty steel hinges so you can reach your gear without climbing into the bed.\u003c\/p\u003e\n\u003cp\u003eEach Swing Case holds up to 75 pounds of tools, recovery gear, or jobsite supplies without cutting into your usable bed length or minimum width. The composite shell resists corrosion, the weather-sealed lid keeps dust and moisture out, and the key-lockable rotary handle keeps your stuff locked down. Driver-side and passenger-side cases are sold separately, so you can run one or both.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Swing Case Is Different\u003c\/h2\u003e\n\u003cp\u003eMost truck bed toolboxes are crossover boxes that eat up two feet of bed length and force you to load cargo around them. The Swing Case uses a piece of bed real estate that usually sits empty, the space above the wheel well, and turns it into secured storage. Your bed stays open for lumber, coolers, dirt bikes, or whatever else you haul.\u003c\/p\u003e\n\u003cp\u003eThe case also works \u003cstrong\u003eunder any tonneau cover\u003c\/strong\u003e. Pair it with a roll-up, folding, or retractable cover and you get lockable tool storage plus a covered bed. Running an open bed truck is fine too. The heavy-duty lid seal means the Swing Case can stand up to the weather on its own.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSwings Out to You\u003c\/strong\u003e Pull the latch and the case rotates out over the tailgate on steel hinges, so you get full access without leaning into the bed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e75-Pound Capacity\u003c\/strong\u003e Room for tools, recovery straps, tie-downs, jumper cables, a first aid kit, or anything else you want to keep off the bed floor.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLockable Security\u003c\/strong\u003e Key-lockable rotary handle protects tools from theft and keeps the lid latched shut on rough roads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable in Seconds\u003c\/strong\u003e The case lifts off the hinge when you need max bed space or want to carry your tools to the jobsite or a roadside repair.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorks Under a Tonneau\u003c\/strong\u003e Designed to fit beneath UnderCover tonneau covers and most other brands, so you can stack storage and bed protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Specs\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rugged composite (ABS polymer) construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHinges:\u003c\/strong\u003e Heavy-duty steel, 180 degree swing-out\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Method:\u003c\/strong\u003e Key-lockable rotary handle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeather Seal:\u003c\/strong\u003e Heavy-duty lid seal against dust, dirt, and moisture\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e Up to 75 lbs per case\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOuter Dimensions:\u003c\/strong\u003e Upper case 29 in L, lower case 15 in L, 8 in W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInner Dimensions:\u003c\/strong\u003e 15 in max depth, 8 in min depth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Driver-side and passenger-side sold separately\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Proudly assembled in Missouri\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year limited warranty on the ABS polymer structure, lock, hinges, and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is straightforward and typically takes about an hour or less per case. Some drilling is required into the inner bed wall, but all required mounting hardware is included in the box. Most owners handle the install in the driveway with basic hand tools.\u003c\/p\u003e\n\u003ch3\u003eInstall Video\u003c\/h3\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/6M7gMRFIrw8\" title=\"UnderCover Swing Case Truck Bed Toolbox Install\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eOverview Video\u003c\/h2\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/dnXtuwO631s\" title=\"UnderCover Swing Case Truck Bed Toolbox Overview\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSwing Case toolbox (driver-side or passenger-side, per the variant you select)\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty steel hinge mount\u003c\/li\u003e\n  \u003cli\u003eLid seal\u003c\/li\u003e\n  \u003cli\u003eKey-lockable rotary handle with keys\u003c\/li\u003e\n  \u003cli\u003eAll required mounting hardware\u003c\/li\u003e\n  \u003cli\u003eInstall instructions\u003c\/li\u003e\n  \u003cli\u003eWarranty registration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout UnderCover\u003c\/h2\u003e\n\u003cp\u003eUnderCover builds tonneau covers and truck bed storage out of the United States and is part of the RealTruck family. The Swing Case has been a staple of the UnderCover lineup for years and is a favorite among contractors, overlanders, and weekend haulers who need locked storage without giving up a usable bed.\u003c\/p\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eSwing Case fitment is specific to your truck's year, make, model, and side (driver or passenger). Before you order, call or text us at \u003cstrong\u003e(623) 272-6510\u003c\/strong\u003e so we can confirm the correct part number for your truck. \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e when you verify with our team first.\u003c\/p\u003e\n\n\u003cp\u003eLooking for other UnderCover gear? Browse the full \u003ca href=\"\/collections\/undercover\"\u003eUnderCover collection\u003c\/a\u003e for tonneau covers and bed storage that work together.\u003c\/p\u003e","brand":"UnderCover","offers":[{"title":"Passenger Side Toolbox","offer_id":53316582506795,"sku":"SC101P","price":179.99,"currency_code":"USD","in_stock":true},{"title":"Driver Side Toolbox","offer_id":53316582539563,"sku":"SC101D","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/c9fac2b66a30b4351883cfa709ec3b78_78ec2451-852c-4b57-9c9a-89dd47054e4c.jpg?v=1776914614"},{"product_id":"undercover-swing-case-truck-bed-toolbox-sc900p-sc900d","title":"UnderCover Swing Case Truck Bed Toolbox - SC900P\/SC900D","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UnderCover Swing Case is a \u003cstrong\u003etruck bed toolbox\u003c\/strong\u003e, not a tonneau cover. It mounts to the inner wall of your bed in the dead space between the rear wheel well and the tailgate, then swings out 180 degrees on heavy-duty steel hinges so you can reach your gear without climbing into the bed.\u003c\/p\u003e\n\u003cp\u003eEach Swing Case holds up to 75 pounds of tools, recovery gear, or jobsite supplies without cutting into your usable bed length or minimum width. The composite shell resists corrosion, the weather-sealed lid keeps dust and moisture out, and the key-lockable rotary handle keeps your stuff locked down. Driver-side and passenger-side cases are sold separately, so you can run one or both.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Swing Case Is Different\u003c\/h2\u003e\n\u003cp\u003eMost truck bed toolboxes are crossover boxes that eat up two feet of bed length and force you to load cargo around them. The Swing Case uses a piece of bed real estate that usually sits empty, the space above the wheel well, and turns it into secured storage. Your bed stays open for lumber, coolers, dirt bikes, or whatever else you haul.\u003c\/p\u003e\n\u003cp\u003eThe case also works \u003cstrong\u003eunder any tonneau cover\u003c\/strong\u003e. Pair it with a roll-up, folding, or retractable cover and you get lockable tool storage plus a covered bed. Running an open bed truck is fine too. The heavy-duty lid seal means the Swing Case can stand up to the weather on its own.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSwings Out to You\u003c\/strong\u003e Pull the latch and the case rotates out over the tailgate on steel hinges, so you get full access without leaning into the bed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e75-Pound Capacity\u003c\/strong\u003e Room for tools, recovery straps, tie-downs, jumper cables, a first aid kit, or anything else you want to keep off the bed floor.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLockable Security\u003c\/strong\u003e Key-lockable rotary handle protects tools from theft and keeps the lid latched shut on rough roads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable in Seconds\u003c\/strong\u003e The case lifts off the hinge when you need max bed space or want to carry your tools to the jobsite or a roadside repair.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorks Under a Tonneau\u003c\/strong\u003e Designed to fit beneath UnderCover tonneau covers and most other brands, so you can stack storage and bed protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Specs\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rugged composite (ABS polymer) construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHinges:\u003c\/strong\u003e Heavy-duty steel, 180 degree swing-out\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Method:\u003c\/strong\u003e Key-lockable rotary handle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeather Seal:\u003c\/strong\u003e Heavy-duty lid seal against dust, dirt, and moisture\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e Up to 75 lbs per case\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOuter Dimensions:\u003c\/strong\u003e Upper case 29 in L, lower case 15 in L, 8 in W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInner Dimensions:\u003c\/strong\u003e 15 in max depth, 8 in min depth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Driver-side and passenger-side sold separately\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Proudly assembled in Missouri\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year limited warranty on the ABS polymer structure, lock, hinges, and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is straightforward and typically takes about an hour or less per case. Some drilling is required into the inner bed wall, but all required mounting hardware is included in the box. Most owners handle the install in the driveway with basic hand tools.\u003c\/p\u003e\n\u003ch3\u003eInstall Video\u003c\/h3\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/6M7gMRFIrw8\" title=\"UnderCover Swing Case Truck Bed Toolbox Install\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eOverview Video\u003c\/h2\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/dnXtuwO631s\" title=\"UnderCover Swing Case Truck Bed Toolbox Overview\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSwing Case toolbox (driver-side or passenger-side, per the variant you select)\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty steel hinge mount\u003c\/li\u003e\n  \u003cli\u003eLid seal\u003c\/li\u003e\n  \u003cli\u003eKey-lockable rotary handle with keys\u003c\/li\u003e\n  \u003cli\u003eAll required mounting hardware\u003c\/li\u003e\n  \u003cli\u003eInstall instructions\u003c\/li\u003e\n  \u003cli\u003eWarranty registration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout UnderCover\u003c\/h2\u003e\n\u003cp\u003eUnderCover builds tonneau covers and truck bed storage out of the United States and is part of the RealTruck family. The Swing Case has been a staple of the UnderCover lineup for years and is a favorite among contractors, overlanders, and weekend haulers who need locked storage without giving up a usable bed.\u003c\/p\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eSwing Case fitment is specific to your truck's year, make, model, and side (driver or passenger). Before you order, call or text us at \u003cstrong\u003e(623) 272-6510\u003c\/strong\u003e so we can confirm the correct part number for your truck. \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e when you verify with our team first.\u003c\/p\u003e\n\n\u003cp\u003eLooking for other UnderCover gear? Browse the full \u003ca href=\"\/collections\/undercover\"\u003eUnderCover collection\u003c\/a\u003e for tonneau covers and bed storage that work together.\u003c\/p\u003e","brand":"UnderCover","offers":[{"title":"Driver Side Toolbox","offer_id":53316582670635,"sku":"SC900D","price":179.99,"currency_code":"USD","in_stock":false},{"title":"Passenger Side Toolbox","offer_id":53316582703403,"sku":"SC900P","price":179.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/c9fac2b66a30b4351883cfa709ec3b78_b887970c-59d0-4a8d-9424-2c16528b8b1b.jpg?v=1776914615"},{"product_id":"undercover-swing-case-truck-bed-toolbox-for-2019-2023-toyota-tacoma","title":"UnderCover Swing Case Truck Bed Toolbox | For 2019 to 2023 Toyota Tacoma","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UnderCover Swing Case is a \u003cstrong\u003etruck bed toolbox\u003c\/strong\u003e, not a tonneau cover. It mounts to the inner wall of your bed in the dead space between the rear wheel well and the tailgate, then swings out 180 degrees on heavy-duty steel hinges so you can reach your gear without climbing into the bed.\u003c\/p\u003e\n\u003cp\u003eEach Swing Case holds up to 75 pounds of tools, recovery gear, or jobsite supplies without cutting into your usable bed length or minimum width. The composite shell resists corrosion, the weather-sealed lid keeps dust and moisture out, and the key-lockable rotary handle keeps your stuff locked down. Driver-side and passenger-side cases are sold separately, so you can run one or both.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Swing Case Is Different\u003c\/h2\u003e\n\u003cp\u003eMost truck bed toolboxes are crossover boxes that eat up two feet of bed length and force you to load cargo around them. The Swing Case uses a piece of bed real estate that usually sits empty, the space above the wheel well, and turns it into secured storage. Your bed stays open for lumber, coolers, dirt bikes, or whatever else you haul.\u003c\/p\u003e\n\u003cp\u003eThe case also works \u003cstrong\u003eunder any tonneau cover\u003c\/strong\u003e. Pair it with a roll-up, folding, or retractable cover and you get lockable tool storage plus a covered bed. Running an open bed truck is fine too. The heavy-duty lid seal means the Swing Case can stand up to the weather on its own.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSwings Out to You\u003c\/strong\u003e Pull the latch and the case rotates out over the tailgate on steel hinges, so you get full access without leaning into the bed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e75-Pound Capacity\u003c\/strong\u003e Room for tools, recovery straps, tie-downs, jumper cables, a first aid kit, or anything else you want to keep off the bed floor.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLockable Security\u003c\/strong\u003e Key-lockable rotary handle protects tools from theft and keeps the lid latched shut on rough roads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable in Seconds\u003c\/strong\u003e The case lifts off the hinge when you need max bed space or want to carry your tools to the jobsite or a roadside repair.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorks Under a Tonneau\u003c\/strong\u003e Designed to fit beneath UnderCover tonneau covers and most other brands, so you can stack storage and bed protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Specs\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rugged composite (ABS polymer) construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHinges:\u003c\/strong\u003e Heavy-duty steel, 180 degree swing-out\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Method:\u003c\/strong\u003e Key-lockable rotary handle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeather Seal:\u003c\/strong\u003e Heavy-duty lid seal against dust, dirt, and moisture\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e Up to 75 lbs per case\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOuter Dimensions:\u003c\/strong\u003e Upper case 29 in L, lower case 15 in L, 8 in W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInner Dimensions:\u003c\/strong\u003e 15 in max depth, 8 in min depth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Driver-side and passenger-side sold separately\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Proudly assembled in Missouri\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year limited warranty on the ABS polymer structure, lock, hinges, and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is straightforward and typically takes about an hour or less per case. Some drilling is required into the inner bed wall, but all required mounting hardware is included in the box. Most owners handle the install in the driveway with basic hand tools.\u003c\/p\u003e\n\u003ch3\u003eInstall Video\u003c\/h3\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/6M7gMRFIrw8\" title=\"UnderCover Swing Case Truck Bed Toolbox Install\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eOverview Video\u003c\/h2\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/dnXtuwO631s\" title=\"UnderCover Swing Case Truck Bed Toolbox Overview\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSwing Case toolbox (driver-side or passenger-side, per the variant you select)\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty steel hinge mount\u003c\/li\u003e\n  \u003cli\u003eLid seal\u003c\/li\u003e\n  \u003cli\u003eKey-lockable rotary handle with keys\u003c\/li\u003e\n  \u003cli\u003eAll required mounting hardware\u003c\/li\u003e\n  \u003cli\u003eInstall instructions\u003c\/li\u003e\n  \u003cli\u003eWarranty registration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout UnderCover\u003c\/h2\u003e\n\u003cp\u003eUnderCover builds tonneau covers and truck bed storage out of the United States and is part of the RealTruck family. The Swing Case has been a staple of the UnderCover lineup for years and is a favorite among contractors, overlanders, and weekend haulers who need locked storage without giving up a usable bed.\u003c\/p\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eSwing Case fitment is specific to your truck's year, make, model, and side (driver or passenger). Before you order, call or text us at \u003cstrong\u003e(623) 272-6510\u003c\/strong\u003e so we can confirm the correct part number for your truck. \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e when you verify with our team first.\u003c\/p\u003e\n\n\u003cp\u003eLooking for other UnderCover gear? Browse the full \u003ca href=\"\/collections\/undercover\"\u003eUnderCover collection\u003c\/a\u003e for tonneau covers and bed storage that work together.\u003c\/p\u003e","brand":"UnderCover","offers":[{"title":"Driver Side Toolbox \u0026 without Driver Side Factory Storage Box","offer_id":53316584735019,"sku":"SC403D","price":179.99,"currency_code":"USD","in_stock":true},{"title":"Driver Side Toolbox \u0026 with Driver Side Factory Storage Box","offer_id":53316584767787,"sku":"SC401D","price":179.99,"currency_code":"USD","in_stock":true},{"title":"Passenger Side Toolbox \u0026 with Driver Side Factory Storage Box","offer_id":53316584800555,"sku":"SC401P","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/c9fac2b66a30b4351883cfa709ec3b78_70a1aba2-6299-42dc-bfcb-d1c4cb48e89b.jpg?v=1776914618"},{"product_id":"undercover-swing-case-truck-bed-toolbox-for-1997-2014-ford-f-150-2004-heritage","title":"UnderCover Swing Case Truck Bed Toolbox | For 1997 to 2014 Ford F-150 \u0026 2004 Heritage","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UnderCover Swing Case is a \u003cstrong\u003etruck bed toolbox\u003c\/strong\u003e, not a tonneau cover. It mounts to the inner wall of your bed in the dead space between the rear wheel well and the tailgate, then swings out 180 degrees on heavy-duty steel hinges so you can reach your gear without climbing into the bed.\u003c\/p\u003e\n\u003cp\u003eEach Swing Case holds up to 75 pounds of tools, recovery gear, or jobsite supplies without cutting into your usable bed length or minimum width. The composite shell resists corrosion, the weather-sealed lid keeps dust and moisture out, and the key-lockable rotary handle keeps your stuff locked down. Driver-side and passenger-side cases are sold separately, so you can run one or both.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Swing Case Is Different\u003c\/h2\u003e\n\u003cp\u003eMost truck bed toolboxes are crossover boxes that eat up two feet of bed length and force you to load cargo around them. The Swing Case uses a piece of bed real estate that usually sits empty, the space above the wheel well, and turns it into secured storage. Your bed stays open for lumber, coolers, dirt bikes, or whatever else you haul.\u003c\/p\u003e\n\u003cp\u003eThe case also works \u003cstrong\u003eunder any tonneau cover\u003c\/strong\u003e. Pair it with a roll-up, folding, or retractable cover and you get lockable tool storage plus a covered bed. Running an open bed truck is fine too. The heavy-duty lid seal means the Swing Case can stand up to the weather on its own.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSwings Out to You\u003c\/strong\u003e Pull the latch and the case rotates out over the tailgate on steel hinges, so you get full access without leaning into the bed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e75-Pound Capacity\u003c\/strong\u003e Room for tools, recovery straps, tie-downs, jumper cables, a first aid kit, or anything else you want to keep off the bed floor.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLockable Security\u003c\/strong\u003e Key-lockable rotary handle protects tools from theft and keeps the lid latched shut on rough roads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable in Seconds\u003c\/strong\u003e The case lifts off the hinge when you need max bed space or want to carry your tools to the jobsite or a roadside repair.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorks Under a Tonneau\u003c\/strong\u003e Designed to fit beneath UnderCover tonneau covers and most other brands, so you can stack storage and bed protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Specs\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rugged composite (ABS polymer) construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHinges:\u003c\/strong\u003e Heavy-duty steel, 180 degree swing-out\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Method:\u003c\/strong\u003e Key-lockable rotary handle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeather Seal:\u003c\/strong\u003e Heavy-duty lid seal against dust, dirt, and moisture\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e Up to 75 lbs per case\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOuter Dimensions:\u003c\/strong\u003e Upper case 29 in L, lower case 15 in L, 8 in W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInner Dimensions:\u003c\/strong\u003e 15 in max depth, 8 in min depth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Driver-side and passenger-side sold separately\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Proudly assembled in Missouri\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year limited warranty on the ABS polymer structure, lock, hinges, and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is straightforward and typically takes about an hour or less per case. Some drilling is required into the inner bed wall, but all required mounting hardware is included in the box. Most owners handle the install in the driveway with basic hand tools.\u003c\/p\u003e\n\u003ch3\u003eInstall Video\u003c\/h3\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/6M7gMRFIrw8\" title=\"UnderCover Swing Case Truck Bed Toolbox Install\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eOverview Video\u003c\/h2\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/dnXtuwO631s\" title=\"UnderCover Swing Case Truck Bed Toolbox Overview\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSwing Case toolbox (driver-side or passenger-side, per the variant you select)\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty steel hinge mount\u003c\/li\u003e\n  \u003cli\u003eLid seal\u003c\/li\u003e\n  \u003cli\u003eKey-lockable rotary handle with keys\u003c\/li\u003e\n  \u003cli\u003eAll required mounting hardware\u003c\/li\u003e\n  \u003cli\u003eInstall instructions\u003c\/li\u003e\n  \u003cli\u003eWarranty registration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout UnderCover\u003c\/h2\u003e\n\u003cp\u003eUnderCover builds tonneau covers and truck bed storage out of the United States and is part of the RealTruck family. The Swing Case has been a staple of the UnderCover lineup for years and is a favorite among contractors, overlanders, and weekend haulers who need locked storage without giving up a usable bed.\u003c\/p\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eSwing Case fitment is specific to your truck's year, make, model, and side (driver or passenger). Before you order, call or text us at \u003cstrong\u003e(623) 272-6510\u003c\/strong\u003e so we can confirm the correct part number for your truck. \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e when you verify with our team first.\u003c\/p\u003e\n\n\u003cp\u003eLooking for other UnderCover gear? Browse the full \u003ca href=\"\/collections\/undercover\"\u003eUnderCover collection\u003c\/a\u003e for tonneau covers and bed storage that work together.\u003c\/p\u003e","brand":"UnderCover","offers":[{"title":"Passenger Side Toolbox","offer_id":53316588405035,"sku":"SC201P","price":179.99,"currency_code":"USD","in_stock":true},{"title":"Driver Side Toolbox","offer_id":53316588437803,"sku":"SC201D","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/c9fac2b66a30b4351883cfa709ec3b78_bb167e35-a525-4dfa-9f46-c33902054afc.jpg?v=1776914623"},{"product_id":"undercover-swing-case-truck-bed-toolbox-for-1987-2011-dodge-ram-dakota","title":"UnderCover Swing Case Truck Bed Toolbox | For 1987 to 2011 Dodge\/RAM Dakota","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UnderCover Swing Case is a \u003cstrong\u003etruck bed toolbox\u003c\/strong\u003e, not a tonneau cover. It mounts to the inner wall of your bed in the dead space between the rear wheel well and the tailgate, then swings out 180 degrees on heavy-duty steel hinges so you can reach your gear without climbing into the bed.\u003c\/p\u003e\n\u003cp\u003eEach Swing Case holds up to 75 pounds of tools, recovery gear, or jobsite supplies without cutting into your usable bed length or minimum width. The composite shell resists corrosion, the weather-sealed lid keeps dust and moisture out, and the key-lockable rotary handle keeps your stuff locked down. Driver-side and passenger-side cases are sold separately, so you can run one or both.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Swing Case Is Different\u003c\/h2\u003e\n\u003cp\u003eMost truck bed toolboxes are crossover boxes that eat up two feet of bed length and force you to load cargo around them. The Swing Case uses a piece of bed real estate that usually sits empty, the space above the wheel well, and turns it into secured storage. Your bed stays open for lumber, coolers, dirt bikes, or whatever else you haul.\u003c\/p\u003e\n\u003cp\u003eThe case also works \u003cstrong\u003eunder any tonneau cover\u003c\/strong\u003e. Pair it with a roll-up, folding, or retractable cover and you get lockable tool storage plus a covered bed. Running an open bed truck is fine too. The heavy-duty lid seal means the Swing Case can stand up to the weather on its own.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSwings Out to You\u003c\/strong\u003e Pull the latch and the case rotates out over the tailgate on steel hinges, so you get full access without leaning into the bed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e75-Pound Capacity\u003c\/strong\u003e Room for tools, recovery straps, tie-downs, jumper cables, a first aid kit, or anything else you want to keep off the bed floor.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLockable Security\u003c\/strong\u003e Key-lockable rotary handle protects tools from theft and keeps the lid latched shut on rough roads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable in Seconds\u003c\/strong\u003e The case lifts off the hinge when you need max bed space or want to carry your tools to the jobsite or a roadside repair.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorks Under a Tonneau\u003c\/strong\u003e Designed to fit beneath UnderCover tonneau covers and most other brands, so you can stack storage and bed protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Specs\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rugged composite (ABS polymer) construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHinges:\u003c\/strong\u003e Heavy-duty steel, 180 degree swing-out\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Method:\u003c\/strong\u003e Key-lockable rotary handle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeather Seal:\u003c\/strong\u003e Heavy-duty lid seal against dust, dirt, and moisture\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e Up to 75 lbs per case\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOuter Dimensions:\u003c\/strong\u003e Upper case 29 in L, lower case 15 in L, 8 in W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInner Dimensions:\u003c\/strong\u003e 15 in max depth, 8 in min depth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Driver-side and passenger-side sold separately\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Proudly assembled in Missouri\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year limited warranty on the ABS polymer structure, lock, hinges, and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is straightforward and typically takes about an hour or less per case. Some drilling is required into the inner bed wall, but all required mounting hardware is included in the box. Most owners handle the install in the driveway with basic hand tools.\u003c\/p\u003e\n\u003ch3\u003eInstall Video\u003c\/h3\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/6M7gMRFIrw8\" title=\"UnderCover Swing Case Truck Bed Toolbox Install\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eOverview Video\u003c\/h2\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/dnXtuwO631s\" title=\"UnderCover Swing Case Truck Bed Toolbox Overview\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSwing Case toolbox (driver-side or passenger-side, per the variant you select)\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty steel hinge mount\u003c\/li\u003e\n  \u003cli\u003eLid seal\u003c\/li\u003e\n  \u003cli\u003eKey-lockable rotary handle with keys\u003c\/li\u003e\n  \u003cli\u003eAll required mounting hardware\u003c\/li\u003e\n  \u003cli\u003eInstall instructions\u003c\/li\u003e\n  \u003cli\u003eWarranty registration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout UnderCover\u003c\/h2\u003e\n\u003cp\u003eUnderCover builds tonneau covers and truck bed storage out of the United States and is part of the RealTruck family. The Swing Case has been a staple of the UnderCover lineup for years and is a favorite among contractors, overlanders, and weekend haulers who need locked storage without giving up a usable bed.\u003c\/p\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eSwing Case fitment is specific to your truck's year, make, model, and side (driver or passenger). Before you order, call or text us at \u003cstrong\u003e(623) 272-6510\u003c\/strong\u003e so we can confirm the correct part number for your truck. \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e when you verify with our team first.\u003c\/p\u003e\n\n\u003cp\u003eLooking for other UnderCover gear? Browse the full \u003ca href=\"\/collections\/undercover\"\u003eUnderCover collection\u003c\/a\u003e for tonneau covers and bed storage that work together.\u003c\/p\u003e","brand":"UnderCover","offers":[{"title":"Driver Side Toolbox","offer_id":53316589027627,"sku":"SC301D","price":179.99,"currency_code":"USD","in_stock":true},{"title":"Passenger Side Toolbox","offer_id":53316589060395,"sku":"SC301P","price":179.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/c9fac2b66a30b4351883cfa709ec3b78_86a7b019-7d49-45f3-8b56-86863d4dfd68.jpg?v=1776914624"},{"product_id":"undercover-swing-case-truck-bed-toolbox-for-2016-2024-nissan-titan-xd-2017-2024-nissan-titan","title":"UnderCover Swing Case Truck Bed Toolbox | For 16-24 Nissan Titan XD \u0026 17-24 Nissan Titan","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UnderCover Swing Case is a \u003cstrong\u003etruck bed toolbox\u003c\/strong\u003e, not a tonneau cover. It mounts to the inner wall of your bed in the dead space between the rear wheel well and the tailgate, then swings out 180 degrees on heavy-duty steel hinges so you can reach your gear without climbing into the bed.\u003c\/p\u003e\n\u003cp\u003eEach Swing Case holds up to 75 pounds of tools, recovery gear, or jobsite supplies without cutting into your usable bed length or minimum width. The composite shell resists corrosion, the weather-sealed lid keeps dust and moisture out, and the key-lockable rotary handle keeps your stuff locked down. Driver-side and passenger-side cases are sold separately, so you can run one or both.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Swing Case Is Different\u003c\/h2\u003e\n\u003cp\u003eMost truck bed toolboxes are crossover boxes that eat up two feet of bed length and force you to load cargo around them. The Swing Case uses a piece of bed real estate that usually sits empty, the space above the wheel well, and turns it into secured storage. Your bed stays open for lumber, coolers, dirt bikes, or whatever else you haul.\u003c\/p\u003e\n\u003cp\u003eThe case also works \u003cstrong\u003eunder any tonneau cover\u003c\/strong\u003e. Pair it with a roll-up, folding, or retractable cover and you get lockable tool storage plus a covered bed. Running an open bed truck is fine too. The heavy-duty lid seal means the Swing Case can stand up to the weather on its own.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSwings Out to You\u003c\/strong\u003e Pull the latch and the case rotates out over the tailgate on steel hinges, so you get full access without leaning into the bed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e75-Pound Capacity\u003c\/strong\u003e Room for tools, recovery straps, tie-downs, jumper cables, a first aid kit, or anything else you want to keep off the bed floor.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLockable Security\u003c\/strong\u003e Key-lockable rotary handle protects tools from theft and keeps the lid latched shut on rough roads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable in Seconds\u003c\/strong\u003e The case lifts off the hinge when you need max bed space or want to carry your tools to the jobsite or a roadside repair.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorks Under a Tonneau\u003c\/strong\u003e Designed to fit beneath UnderCover tonneau covers and most other brands, so you can stack storage and bed protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Specs\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rugged composite (ABS polymer) construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHinges:\u003c\/strong\u003e Heavy-duty steel, 180 degree swing-out\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Method:\u003c\/strong\u003e Key-lockable rotary handle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeather Seal:\u003c\/strong\u003e Heavy-duty lid seal against dust, dirt, and moisture\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e Up to 75 lbs per case\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOuter Dimensions:\u003c\/strong\u003e Upper case 29 in L, lower case 15 in L, 8 in W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInner Dimensions:\u003c\/strong\u003e 15 in max depth, 8 in min depth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Driver-side and passenger-side sold separately\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Proudly assembled in Missouri\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year limited warranty on the ABS polymer structure, lock, hinges, and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is straightforward and typically takes about an hour or less per case. Some drilling is required into the inner bed wall, but all required mounting hardware is included in the box. Most owners handle the install in the driveway with basic hand tools.\u003c\/p\u003e\n\u003ch3\u003eInstall Video\u003c\/h3\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/6M7gMRFIrw8\" title=\"UnderCover Swing Case Truck Bed Toolbox Install\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eOverview Video\u003c\/h2\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/dnXtuwO631s\" title=\"UnderCover Swing Case Truck Bed Toolbox Overview\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSwing Case toolbox (driver-side or passenger-side, per the variant you select)\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty steel hinge mount\u003c\/li\u003e\n  \u003cli\u003eLid seal\u003c\/li\u003e\n  \u003cli\u003eKey-lockable rotary handle with keys\u003c\/li\u003e\n  \u003cli\u003eAll required mounting hardware\u003c\/li\u003e\n  \u003cli\u003eInstall instructions\u003c\/li\u003e\n  \u003cli\u003eWarranty registration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout UnderCover\u003c\/h2\u003e\n\u003cp\u003eUnderCover builds tonneau covers and truck bed storage out of the United States and is part of the RealTruck family. The Swing Case has been a staple of the UnderCover lineup for years and is a favorite among contractors, overlanders, and weekend haulers who need locked storage without giving up a usable bed.\u003c\/p\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eSwing Case fitment is specific to your truck's year, make, model, and side (driver or passenger). Before you order, call or text us at \u003cstrong\u003e(623) 272-6510\u003c\/strong\u003e so we can confirm the correct part number for your truck. \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e when you verify with our team first.\u003c\/p\u003e\n\n\u003cp\u003eLooking for other UnderCover gear? Browse the full \u003ca href=\"\/collections\/undercover\"\u003eUnderCover collection\u003c\/a\u003e for tonneau covers and bed storage that work together.\u003c\/p\u003e","brand":"UnderCover","offers":[{"title":"Passenger Side Toolbox","offer_id":53316590305579,"sku":"SC502P","price":179.99,"currency_code":"USD","in_stock":false},{"title":"Driver Side Toolbox","offer_id":53316590338347,"sku":"SC502D","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/c9fac2b66a30b4351883cfa709ec3b78_a62a5736-290a-4ea2-9a86-576af7af7fca.jpg?v=1776914626"},{"product_id":"undercover-swing-case-truck-bed-toolbox-for-2023-2026-chevrolet-colorado-gmc-canyon","title":"UnderCover Swing Case Truck Bed Toolbox | For 2023 to 2026 Chevrolet Colorado\/GMC Canyon","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UnderCover Swing Case is a \u003cstrong\u003etruck bed toolbox\u003c\/strong\u003e, not a tonneau cover. It mounts to the inner wall of your bed in the dead space between the rear wheel well and the tailgate, then swings out 180 degrees on heavy-duty steel hinges so you can reach your gear without climbing into the bed.\u003c\/p\u003e\n\u003cp\u003eEach Swing Case holds up to 75 pounds of tools, recovery gear, or jobsite supplies without cutting into your usable bed length or minimum width. The composite shell resists corrosion, the weather-sealed lid keeps dust and moisture out, and the key-lockable rotary handle keeps your stuff locked down. Driver-side and passenger-side cases are sold separately, so you can run one or both.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Swing Case Is Different\u003c\/h2\u003e\n\u003cp\u003eMost truck bed toolboxes are crossover boxes that eat up two feet of bed length and force you to load cargo around them. The Swing Case uses a piece of bed real estate that usually sits empty, the space above the wheel well, and turns it into secured storage. Your bed stays open for lumber, coolers, dirt bikes, or whatever else you haul.\u003c\/p\u003e\n\u003cp\u003eThe case also works \u003cstrong\u003eunder any tonneau cover\u003c\/strong\u003e. Pair it with a roll-up, folding, or retractable cover and you get lockable tool storage plus a covered bed. Running an open bed truck is fine too. The heavy-duty lid seal means the Swing Case can stand up to the weather on its own.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSwings Out to You\u003c\/strong\u003e Pull the latch and the case rotates out over the tailgate on steel hinges, so you get full access without leaning into the bed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e75-Pound Capacity\u003c\/strong\u003e Room for tools, recovery straps, tie-downs, jumper cables, a first aid kit, or anything else you want to keep off the bed floor.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLockable Security\u003c\/strong\u003e Key-lockable rotary handle protects tools from theft and keeps the lid latched shut on rough roads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable in Seconds\u003c\/strong\u003e The case lifts off the hinge when you need max bed space or want to carry your tools to the jobsite or a roadside repair.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorks Under a Tonneau\u003c\/strong\u003e Designed to fit beneath UnderCover tonneau covers and most other brands, so you can stack storage and bed protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Specs\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rugged composite (ABS polymer) construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHinges:\u003c\/strong\u003e Heavy-duty steel, 180 degree swing-out\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Method:\u003c\/strong\u003e Key-lockable rotary handle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeather Seal:\u003c\/strong\u003e Heavy-duty lid seal against dust, dirt, and moisture\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e Up to 75 lbs per case\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOuter Dimensions:\u003c\/strong\u003e Upper case 29 in L, lower case 15 in L, 8 in W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInner Dimensions:\u003c\/strong\u003e 15 in max depth, 8 in min depth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Driver-side and passenger-side sold separately\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Proudly assembled in Missouri\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year limited warranty on the ABS polymer structure, lock, hinges, and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is straightforward and typically takes about an hour or less per case. Some drilling is required into the inner bed wall, but all required mounting hardware is included in the box. Most owners handle the install in the driveway with basic hand tools.\u003c\/p\u003e\n\u003ch3\u003eInstall Video\u003c\/h3\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/6M7gMRFIrw8\" title=\"UnderCover Swing Case Truck Bed Toolbox Install\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eOverview Video\u003c\/h2\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/dnXtuwO631s\" title=\"UnderCover Swing Case Truck Bed Toolbox Overview\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSwing Case toolbox (driver-side or passenger-side, per the variant you select)\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty steel hinge mount\u003c\/li\u003e\n  \u003cli\u003eLid seal\u003c\/li\u003e\n  \u003cli\u003eKey-lockable rotary handle with keys\u003c\/li\u003e\n  \u003cli\u003eAll required mounting hardware\u003c\/li\u003e\n  \u003cli\u003eInstall instructions\u003c\/li\u003e\n  \u003cli\u003eWarranty registration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout UnderCover\u003c\/h2\u003e\n\u003cp\u003eUnderCover builds tonneau covers and truck bed storage out of the United States and is part of the RealTruck family. The Swing Case has been a staple of the UnderCover lineup for years and is a favorite among contractors, overlanders, and weekend haulers who need locked storage without giving up a usable bed.\u003c\/p\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eSwing Case fitment is specific to your truck's year, make, model, and side (driver or passenger). Before you order, call or text us at \u003cstrong\u003e(623) 272-6510\u003c\/strong\u003e so we can confirm the correct part number for your truck. \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e when you verify with our team first.\u003c\/p\u003e\n\n\u003cp\u003eLooking for other UnderCover gear? Browse the full \u003ca href=\"\/collections\/undercover\"\u003eUnderCover collection\u003c\/a\u003e for tonneau covers and bed storage that work together.\u003c\/p\u003e","brand":"UnderCover","offers":[{"title":"Passenger Side Toolbox","offer_id":53316592599339,"sku":"SC107P","price":179.99,"currency_code":"USD","in_stock":true},{"title":"Driver Side Toolbox","offer_id":53316592632107,"sku":"SC107D","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/c9fac2b66a30b4351883cfa709ec3b78_6da3c3a4-fcfb-4a89-b188-9aeba6b883bc.jpg?v=1776914629"},{"product_id":"undercover-swing-case-truck-bed-toolbox-for-2015-2020-ford-f-150-2022-2026-f-150-lightning","title":"UnderCover Swing Case Truck Bed Toolbox | For 15-20 Ford F-150 \u0026 22-26 F-150 Lightning","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UnderCover Swing Case is a \u003cstrong\u003etruck bed toolbox\u003c\/strong\u003e, not a tonneau cover. It mounts to the inner wall of your bed in the dead space between the rear wheel well and the tailgate, then swings out 180 degrees on heavy-duty steel hinges so you can reach your gear without climbing into the bed.\u003c\/p\u003e\n\u003cp\u003eEach Swing Case holds up to 75 pounds of tools, recovery gear, or jobsite supplies without cutting into your usable bed length or minimum width. The composite shell resists corrosion, the weather-sealed lid keeps dust and moisture out, and the key-lockable rotary handle keeps your stuff locked down. Driver-side and passenger-side cases are sold separately, so you can run one or both.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Swing Case Is Different\u003c\/h2\u003e\n\u003cp\u003eMost truck bed toolboxes are crossover boxes that eat up two feet of bed length and force you to load cargo around them. The Swing Case uses a piece of bed real estate that usually sits empty, the space above the wheel well, and turns it into secured storage. Your bed stays open for lumber, coolers, dirt bikes, or whatever else you haul.\u003c\/p\u003e\n\u003cp\u003eThe case also works \u003cstrong\u003eunder any tonneau cover\u003c\/strong\u003e. Pair it with a roll-up, folding, or retractable cover and you get lockable tool storage plus a covered bed. Running an open bed truck is fine too. The heavy-duty lid seal means the Swing Case can stand up to the weather on its own.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSwings Out to You\u003c\/strong\u003e Pull the latch and the case rotates out over the tailgate on steel hinges, so you get full access without leaning into the bed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e75-Pound Capacity\u003c\/strong\u003e Room for tools, recovery straps, tie-downs, jumper cables, a first aid kit, or anything else you want to keep off the bed floor.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLockable Security\u003c\/strong\u003e Key-lockable rotary handle protects tools from theft and keeps the lid latched shut on rough roads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable in Seconds\u003c\/strong\u003e The case lifts off the hinge when you need max bed space or want to carry your tools to the jobsite or a roadside repair.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorks Under a Tonneau\u003c\/strong\u003e Designed to fit beneath UnderCover tonneau covers and most other brands, so you can stack storage and bed protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Specs\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rugged composite (ABS polymer) construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHinges:\u003c\/strong\u003e Heavy-duty steel, 180 degree swing-out\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Method:\u003c\/strong\u003e Key-lockable rotary handle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeather Seal:\u003c\/strong\u003e Heavy-duty lid seal against dust, dirt, and moisture\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e Up to 75 lbs per case\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOuter Dimensions:\u003c\/strong\u003e Upper case 29 in L, lower case 15 in L, 8 in W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInner Dimensions:\u003c\/strong\u003e 15 in max depth, 8 in min depth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Driver-side and passenger-side sold separately\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Proudly assembled in Missouri\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year limited warranty on the ABS polymer structure, lock, hinges, and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is straightforward and typically takes about an hour or less per case. Some drilling is required into the inner bed wall, but all required mounting hardware is included in the box. Most owners handle the install in the driveway with basic hand tools.\u003c\/p\u003e\n\u003ch3\u003eInstall Video\u003c\/h3\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/6M7gMRFIrw8\" title=\"UnderCover Swing Case Truck Bed Toolbox Install\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eOverview Video\u003c\/h2\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/dnXtuwO631s\" title=\"UnderCover Swing Case Truck Bed Toolbox Overview\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSwing Case toolbox (driver-side or passenger-side, per the variant you select)\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty steel hinge mount\u003c\/li\u003e\n  \u003cli\u003eLid seal\u003c\/li\u003e\n  \u003cli\u003eKey-lockable rotary handle with keys\u003c\/li\u003e\n  \u003cli\u003eAll required mounting hardware\u003c\/li\u003e\n  \u003cli\u003eInstall instructions\u003c\/li\u003e\n  \u003cli\u003eWarranty registration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout UnderCover\u003c\/h2\u003e\n\u003cp\u003eUnderCover builds tonneau covers and truck bed storage out of the United States and is part of the RealTruck family. The Swing Case has been a staple of the UnderCover lineup for years and is a favorite among contractors, overlanders, and weekend haulers who need locked storage without giving up a usable bed.\u003c\/p\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eSwing Case fitment is specific to your truck's year, make, model, and side (driver or passenger). Before you order, call or text us at \u003cstrong\u003e(623) 272-6510\u003c\/strong\u003e so we can confirm the correct part number for your truck. \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e when you verify with our team first.\u003c\/p\u003e\n\n\u003cp\u003eLooking for other UnderCover gear? Browse the full \u003ca href=\"\/collections\/undercover\"\u003eUnderCover collection\u003c\/a\u003e for tonneau covers and bed storage that work together.\u003c\/p\u003e","brand":"UnderCover","offers":[{"title":"Passenger Side Toolbox","offer_id":53316592992555,"sku":"SC203P","price":179.99,"currency_code":"USD","in_stock":true},{"title":"Driver Side Toolbox","offer_id":53316593025323,"sku":"SC203D","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/c9fac2b66a30b4351883cfa709ec3b78_b93f637c-0c23-49e2-ad7f-8f80c753a272.jpg?v=1776914631"},{"product_id":"undercover-swing-case-truck-bed-toolbox-for-2007-2021-toyota-tundra","title":"UnderCover Swing Case Truck Bed Toolbox | For 2007 to 2021 Toyota Tundra","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UnderCover Swing Case is a \u003cstrong\u003etruck bed toolbox\u003c\/strong\u003e, not a tonneau cover. It mounts to the inner wall of your bed in the dead space between the rear wheel well and the tailgate, then swings out 180 degrees on heavy-duty steel hinges so you can reach your gear without climbing into the bed.\u003c\/p\u003e\n\u003cp\u003eEach Swing Case holds up to 75 pounds of tools, recovery gear, or jobsite supplies without cutting into your usable bed length or minimum width. The composite shell resists corrosion, the weather-sealed lid keeps dust and moisture out, and the key-lockable rotary handle keeps your stuff locked down. Driver-side and passenger-side cases are sold separately, so you can run one or both.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Swing Case Is Different\u003c\/h2\u003e\n\u003cp\u003eMost truck bed toolboxes are crossover boxes that eat up two feet of bed length and force you to load cargo around them. The Swing Case uses a piece of bed real estate that usually sits empty, the space above the wheel well, and turns it into secured storage. Your bed stays open for lumber, coolers, dirt bikes, or whatever else you haul.\u003c\/p\u003e\n\u003cp\u003eThe case also works \u003cstrong\u003eunder any tonneau cover\u003c\/strong\u003e. Pair it with a roll-up, folding, or retractable cover and you get lockable tool storage plus a covered bed. Running an open bed truck is fine too. The heavy-duty lid seal means the Swing Case can stand up to the weather on its own.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSwings Out to You\u003c\/strong\u003e Pull the latch and the case rotates out over the tailgate on steel hinges, so you get full access without leaning into the bed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e75-Pound Capacity\u003c\/strong\u003e Room for tools, recovery straps, tie-downs, jumper cables, a first aid kit, or anything else you want to keep off the bed floor.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLockable Security\u003c\/strong\u003e Key-lockable rotary handle protects tools from theft and keeps the lid latched shut on rough roads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable in Seconds\u003c\/strong\u003e The case lifts off the hinge when you need max bed space or want to carry your tools to the jobsite or a roadside repair.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorks Under a Tonneau\u003c\/strong\u003e Designed to fit beneath UnderCover tonneau covers and most other brands, so you can stack storage and bed protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Specs\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rugged composite (ABS polymer) construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHinges:\u003c\/strong\u003e Heavy-duty steel, 180 degree swing-out\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Method:\u003c\/strong\u003e Key-lockable rotary handle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeather Seal:\u003c\/strong\u003e Heavy-duty lid seal against dust, dirt, and moisture\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e Up to 75 lbs per case\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOuter Dimensions:\u003c\/strong\u003e Upper case 29 in L, lower case 15 in L, 8 in W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInner Dimensions:\u003c\/strong\u003e 15 in max depth, 8 in min depth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Driver-side and passenger-side sold separately\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Proudly assembled in Missouri\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year limited warranty on the ABS polymer structure, lock, hinges, and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is straightforward and typically takes about an hour or less per case. Some drilling is required into the inner bed wall, but all required mounting hardware is included in the box. Most owners handle the install in the driveway with basic hand tools.\u003c\/p\u003e\n\u003ch3\u003eInstall Video\u003c\/h3\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/6M7gMRFIrw8\" title=\"UnderCover Swing Case Truck Bed Toolbox Install\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eOverview Video\u003c\/h2\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/dnXtuwO631s\" title=\"UnderCover Swing Case Truck Bed Toolbox Overview\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSwing Case toolbox (driver-side or passenger-side, per the variant you select)\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty steel hinge mount\u003c\/li\u003e\n  \u003cli\u003eLid seal\u003c\/li\u003e\n  \u003cli\u003eKey-lockable rotary handle with keys\u003c\/li\u003e\n  \u003cli\u003eAll required mounting hardware\u003c\/li\u003e\n  \u003cli\u003eInstall instructions\u003c\/li\u003e\n  \u003cli\u003eWarranty registration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout UnderCover\u003c\/h2\u003e\n\u003cp\u003eUnderCover builds tonneau covers and truck bed storage out of the United States and is part of the RealTruck family. The Swing Case has been a staple of the UnderCover lineup for years and is a favorite among contractors, overlanders, and weekend haulers who need locked storage without giving up a usable bed.\u003c\/p\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eSwing Case fitment is specific to your truck's year, make, model, and side (driver or passenger). Before you order, call or text us at \u003cstrong\u003e(623) 272-6510\u003c\/strong\u003e so we can confirm the correct part number for your truck. \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e when you verify with our team first.\u003c\/p\u003e\n\n\u003cp\u003eLooking for other UnderCover gear? Browse the full \u003ca href=\"\/collections\/undercover\"\u003eUnderCover collection\u003c\/a\u003e for tonneau covers and bed storage that work together.\u003c\/p\u003e","brand":"UnderCover","offers":[{"title":"Passenger Side Toolbox","offer_id":53316594467115,"sku":"SC400P","price":179.99,"currency_code":"USD","in_stock":true},{"title":"Driver Side Toolbox","offer_id":53316594499883,"sku":"SC400D","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/c9fac2b66a30b4351883cfa709ec3b78_87f4fa7d-e386-410e-88eb-4def4dd9ad54.jpg?v=1776914635"},{"product_id":"undercover-swing-case-truck-bed-toolbox-for-05-21-nissan-frontier-04-15-titan","title":"UnderCover Swing Case Truck Bed Toolbox | For 05-21 Nissan Frontier \u0026 04-15 Titan","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UnderCover Swing Case is a \u003cstrong\u003etruck bed toolbox\u003c\/strong\u003e, not a tonneau cover. It mounts to the inner wall of your bed in the dead space between the rear wheel well and the tailgate, then swings out 180 degrees on heavy-duty steel hinges so you can reach your gear without climbing into the bed.\u003c\/p\u003e\n\u003cp\u003eEach Swing Case holds up to 75 pounds of tools, recovery gear, or jobsite supplies without cutting into your usable bed length or minimum width. The composite shell resists corrosion, the weather-sealed lid keeps dust and moisture out, and the key-lockable rotary handle keeps your stuff locked down. Driver-side and passenger-side cases are sold separately, so you can run one or both.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Swing Case Is Different\u003c\/h2\u003e\n\u003cp\u003eMost truck bed toolboxes are crossover boxes that eat up two feet of bed length and force you to load cargo around them. The Swing Case uses a piece of bed real estate that usually sits empty, the space above the wheel well, and turns it into secured storage. Your bed stays open for lumber, coolers, dirt bikes, or whatever else you haul.\u003c\/p\u003e\n\u003cp\u003eThe case also works \u003cstrong\u003eunder any tonneau cover\u003c\/strong\u003e. Pair it with a roll-up, folding, or retractable cover and you get lockable tool storage plus a covered bed. Running an open bed truck is fine too. The heavy-duty lid seal means the Swing Case can stand up to the weather on its own.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSwings Out to You\u003c\/strong\u003e Pull the latch and the case rotates out over the tailgate on steel hinges, so you get full access without leaning into the bed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e75-Pound Capacity\u003c\/strong\u003e Room for tools, recovery straps, tie-downs, jumper cables, a first aid kit, or anything else you want to keep off the bed floor.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLockable Security\u003c\/strong\u003e Key-lockable rotary handle protects tools from theft and keeps the lid latched shut on rough roads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable in Seconds\u003c\/strong\u003e The case lifts off the hinge when you need max bed space or want to carry your tools to the jobsite or a roadside repair.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorks Under a Tonneau\u003c\/strong\u003e Designed to fit beneath UnderCover tonneau covers and most other brands, so you can stack storage and bed protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Specs\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rugged composite (ABS polymer) construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHinges:\u003c\/strong\u003e Heavy-duty steel, 180 degree swing-out\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Method:\u003c\/strong\u003e Key-lockable rotary handle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeather Seal:\u003c\/strong\u003e Heavy-duty lid seal against dust, dirt, and moisture\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e Up to 75 lbs per case\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOuter Dimensions:\u003c\/strong\u003e Upper case 29 in L, lower case 15 in L, 8 in W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInner Dimensions:\u003c\/strong\u003e 15 in max depth, 8 in min depth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Driver-side and passenger-side sold separately\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Proudly assembled in Missouri\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year limited warranty on the ABS polymer structure, lock, hinges, and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is straightforward and typically takes about an hour or less per case. Some drilling is required into the inner bed wall, but all required mounting hardware is included in the box. Most owners handle the install in the driveway with basic hand tools.\u003c\/p\u003e\n\u003ch3\u003eInstall Video\u003c\/h3\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/6M7gMRFIrw8\" title=\"UnderCover Swing Case Truck Bed Toolbox Install\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eOverview Video\u003c\/h2\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/dnXtuwO631s\" title=\"UnderCover Swing Case Truck Bed Toolbox Overview\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSwing Case toolbox (driver-side or passenger-side, per the variant you select)\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty steel hinge mount\u003c\/li\u003e\n  \u003cli\u003eLid seal\u003c\/li\u003e\n  \u003cli\u003eKey-lockable rotary handle with keys\u003c\/li\u003e\n  \u003cli\u003eAll required mounting hardware\u003c\/li\u003e\n  \u003cli\u003eInstall instructions\u003c\/li\u003e\n  \u003cli\u003eWarranty registration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout UnderCover\u003c\/h2\u003e\n\u003cp\u003eUnderCover builds tonneau covers and truck bed storage out of the United States and is part of the RealTruck family. The Swing Case has been a staple of the UnderCover lineup for years and is a favorite among contractors, overlanders, and weekend haulers who need locked storage without giving up a usable bed.\u003c\/p\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eSwing Case fitment is specific to your truck's year, make, model, and side (driver or passenger). Before you order, call or text us at \u003cstrong\u003e(623) 272-6510\u003c\/strong\u003e so we can confirm the correct part number for your truck. \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e when you verify with our team first.\u003c\/p\u003e\n\n\u003cp\u003eLooking for other UnderCover gear? Browse the full \u003ca href=\"\/collections\/undercover\"\u003eUnderCover collection\u003c\/a\u003e for tonneau covers and bed storage that work together.\u003c\/p\u003e","brand":"UnderCover","offers":[{"title":"Driver Side Toolbox","offer_id":53316594630955,"sku":"SC500D","price":179.99,"currency_code":"USD","in_stock":true},{"title":"Passenger Side Toolbox","offer_id":53316594663723,"sku":"SC500P","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/c9fac2b66a30b4351883cfa709ec3b78_a92a4865-ef1e-47be-9b9d-3b29d9106bc3.jpg?v=1776914635"},{"product_id":"undercover-swing-case-truck-bed-toolbox-for-02-18-ram-1500-10-26-ram-2500-3500","title":"UnderCover Swing Case Truck Bed Toolbox | For 02-18 RAM 1500 \u0026 10-26 RAM 2500\/3500","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UnderCover Swing Case is a \u003cstrong\u003etruck bed toolbox\u003c\/strong\u003e, not a tonneau cover. It mounts to the inner wall of your bed in the dead space between the rear wheel well and the tailgate, then swings out 180 degrees on heavy-duty steel hinges so you can reach your gear without climbing into the bed.\u003c\/p\u003e\n\u003cp\u003eEach Swing Case holds up to 75 pounds of tools, recovery gear, or jobsite supplies without cutting into your usable bed length or minimum width. The composite shell resists corrosion, the weather-sealed lid keeps dust and moisture out, and the key-lockable rotary handle keeps your stuff locked down. Driver-side and passenger-side cases are sold separately, so you can run one or both.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Swing Case Is Different\u003c\/h2\u003e\n\u003cp\u003eMost truck bed toolboxes are crossover boxes that eat up two feet of bed length and force you to load cargo around them. The Swing Case uses a piece of bed real estate that usually sits empty, the space above the wheel well, and turns it into secured storage. Your bed stays open for lumber, coolers, dirt bikes, or whatever else you haul.\u003c\/p\u003e\n\u003cp\u003eThe case also works \u003cstrong\u003eunder any tonneau cover\u003c\/strong\u003e. Pair it with a roll-up, folding, or retractable cover and you get lockable tool storage plus a covered bed. Running an open bed truck is fine too. The heavy-duty lid seal means the Swing Case can stand up to the weather on its own.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSwings Out to You\u003c\/strong\u003e Pull the latch and the case rotates out over the tailgate on steel hinges, so you get full access without leaning into the bed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e75-Pound Capacity\u003c\/strong\u003e Room for tools, recovery straps, tie-downs, jumper cables, a first aid kit, or anything else you want to keep off the bed floor.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLockable Security\u003c\/strong\u003e Key-lockable rotary handle protects tools from theft and keeps the lid latched shut on rough roads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable in Seconds\u003c\/strong\u003e The case lifts off the hinge when you need max bed space or want to carry your tools to the jobsite or a roadside repair.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorks Under a Tonneau\u003c\/strong\u003e Designed to fit beneath UnderCover tonneau covers and most other brands, so you can stack storage and bed protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Specs\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rugged composite (ABS polymer) construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHinges:\u003c\/strong\u003e Heavy-duty steel, 180 degree swing-out\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Method:\u003c\/strong\u003e Key-lockable rotary handle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeather Seal:\u003c\/strong\u003e Heavy-duty lid seal against dust, dirt, and moisture\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e Up to 75 lbs per case\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOuter Dimensions:\u003c\/strong\u003e Upper case 29 in L, lower case 15 in L, 8 in W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInner Dimensions:\u003c\/strong\u003e 15 in max depth, 8 in min depth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Driver-side and passenger-side sold separately\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Proudly assembled in Missouri\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year limited warranty on the ABS polymer structure, lock, hinges, and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is straightforward and typically takes about an hour or less per case. Some drilling is required into the inner bed wall, but all required mounting hardware is included in the box. Most owners handle the install in the driveway with basic hand tools.\u003c\/p\u003e\n\u003ch3\u003eInstall Video\u003c\/h3\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/6M7gMRFIrw8\" title=\"UnderCover Swing Case Truck Bed Toolbox Install\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eOverview Video\u003c\/h2\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/dnXtuwO631s\" title=\"UnderCover Swing Case Truck Bed Toolbox Overview\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSwing Case toolbox (driver-side or passenger-side, per the variant you select)\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty steel hinge mount\u003c\/li\u003e\n  \u003cli\u003eLid seal\u003c\/li\u003e\n  \u003cli\u003eKey-lockable rotary handle with keys\u003c\/li\u003e\n  \u003cli\u003eAll required mounting hardware\u003c\/li\u003e\n  \u003cli\u003eInstall instructions\u003c\/li\u003e\n  \u003cli\u003eWarranty registration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout UnderCover\u003c\/h2\u003e\n\u003cp\u003eUnderCover builds tonneau covers and truck bed storage out of the United States and is part of the RealTruck family. The Swing Case has been a staple of the UnderCover lineup for years and is a favorite among contractors, overlanders, and weekend haulers who need locked storage without giving up a usable bed.\u003c\/p\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eSwing Case fitment is specific to your truck's year, make, model, and side (driver or passenger). Before you order, call or text us at \u003cstrong\u003e(623) 272-6510\u003c\/strong\u003e so we can confirm the correct part number for your truck. \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e when you verify with our team first.\u003c\/p\u003e\n\n\u003cp\u003eLooking for other UnderCover gear? Browse the full \u003ca href=\"\/collections\/undercover\"\u003eUnderCover collection\u003c\/a\u003e for tonneau covers and bed storage that work together.\u003c\/p\u003e","brand":"UnderCover","offers":[{"title":"Passenger Side Toolbox","offer_id":53316594696491,"sku":"SC300P","price":179.99,"currency_code":"USD","in_stock":true},{"title":"Driver Side Toolbox","offer_id":53316594729259,"sku":"SC300D","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/c9fac2b66a30b4351883cfa709ec3b78_53644f2a-dbe5-43b3-8512-a722d387de20.jpg?v=1776914636"},{"product_id":"undercover-swing-case-truck-bed-toolbox-for-1999-2016-ford-f-250-350","title":"UnderCover Swing Case Truck Bed Toolbox | For 1999 to 2016 Ford F-250\/350","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UnderCover Swing Case is a \u003cstrong\u003etruck bed toolbox\u003c\/strong\u003e, not a tonneau cover. It mounts to the inner wall of your bed in the dead space between the rear wheel well and the tailgate, then swings out 180 degrees on heavy-duty steel hinges so you can reach your gear without climbing into the bed.\u003c\/p\u003e\n\u003cp\u003eEach Swing Case holds up to 75 pounds of tools, recovery gear, or jobsite supplies without cutting into your usable bed length or minimum width. The composite shell resists corrosion, the weather-sealed lid keeps dust and moisture out, and the key-lockable rotary handle keeps your stuff locked down. Driver-side and passenger-side cases are sold separately, so you can run one or both.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Swing Case Is Different\u003c\/h2\u003e\n\u003cp\u003eMost truck bed toolboxes are crossover boxes that eat up two feet of bed length and force you to load cargo around them. The Swing Case uses a piece of bed real estate that usually sits empty, the space above the wheel well, and turns it into secured storage. Your bed stays open for lumber, coolers, dirt bikes, or whatever else you haul.\u003c\/p\u003e\n\u003cp\u003eThe case also works \u003cstrong\u003eunder any tonneau cover\u003c\/strong\u003e. Pair it with a roll-up, folding, or retractable cover and you get lockable tool storage plus a covered bed. Running an open bed truck is fine too. The heavy-duty lid seal means the Swing Case can stand up to the weather on its own.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSwings Out to You\u003c\/strong\u003e Pull the latch and the case rotates out over the tailgate on steel hinges, so you get full access without leaning into the bed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e75-Pound Capacity\u003c\/strong\u003e Room for tools, recovery straps, tie-downs, jumper cables, a first aid kit, or anything else you want to keep off the bed floor.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLockable Security\u003c\/strong\u003e Key-lockable rotary handle protects tools from theft and keeps the lid latched shut on rough roads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable in Seconds\u003c\/strong\u003e The case lifts off the hinge when you need max bed space or want to carry your tools to the jobsite or a roadside repair.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorks Under a Tonneau\u003c\/strong\u003e Designed to fit beneath UnderCover tonneau covers and most other brands, so you can stack storage and bed protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Specs\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rugged composite (ABS polymer) construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHinges:\u003c\/strong\u003e Heavy-duty steel, 180 degree swing-out\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Method:\u003c\/strong\u003e Key-lockable rotary handle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeather Seal:\u003c\/strong\u003e Heavy-duty lid seal against dust, dirt, and moisture\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e Up to 75 lbs per case\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOuter Dimensions:\u003c\/strong\u003e Upper case 29 in L, lower case 15 in L, 8 in W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInner Dimensions:\u003c\/strong\u003e 15 in max depth, 8 in min depth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Driver-side and passenger-side sold separately\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Proudly assembled in Missouri\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year limited warranty on the ABS polymer structure, lock, hinges, and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is straightforward and typically takes about an hour or less per case. Some drilling is required into the inner bed wall, but all required mounting hardware is included in the box. Most owners handle the install in the driveway with basic hand tools.\u003c\/p\u003e\n\u003ch3\u003eInstall Video\u003c\/h3\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/6M7gMRFIrw8\" title=\"UnderCover Swing Case Truck Bed Toolbox Install\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eOverview Video\u003c\/h2\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/dnXtuwO631s\" title=\"UnderCover Swing Case Truck Bed Toolbox Overview\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSwing Case toolbox (driver-side or passenger-side, per the variant you select)\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty steel hinge mount\u003c\/li\u003e\n  \u003cli\u003eLid seal\u003c\/li\u003e\n  \u003cli\u003eKey-lockable rotary handle with keys\u003c\/li\u003e\n  \u003cli\u003eAll required mounting hardware\u003c\/li\u003e\n  \u003cli\u003eInstall instructions\u003c\/li\u003e\n  \u003cli\u003eWarranty registration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout UnderCover\u003c\/h2\u003e\n\u003cp\u003eUnderCover builds tonneau covers and truck bed storage out of the United States and is part of the RealTruck family. The Swing Case has been a staple of the UnderCover lineup for years and is a favorite among contractors, overlanders, and weekend haulers who need locked storage without giving up a usable bed.\u003c\/p\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eSwing Case fitment is specific to your truck's year, make, model, and side (driver or passenger). Before you order, call or text us at \u003cstrong\u003e(623) 272-6510\u003c\/strong\u003e so we can confirm the correct part number for your truck. \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e when you verify with our team first.\u003c\/p\u003e\n\n\u003cp\u003eLooking for other UnderCover gear? Browse the full \u003ca href=\"\/collections\/undercover\"\u003eUnderCover collection\u003c\/a\u003e for tonneau covers and bed storage that work together.\u003c\/p\u003e","brand":"UnderCover","offers":[{"title":"Driver Side Toolbox","offer_id":53316594925867,"sku":"SC200D","price":179.99,"currency_code":"USD","in_stock":true},{"title":"Passenger Side Toolbox","offer_id":53316594958635,"sku":"SC200P","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/c9fac2b66a30b4351883cfa709ec3b78_2abb9efd-bb50-4872-98dc-4c44f917d181.jpg?v=1776914637"},{"product_id":"undercover-swing-case-truck-bed-toolbox-for-2022-2026-gmc-hummer-ev","title":"UnderCover Swing Case Truck Bed Toolbox | For 2022 to 2026 GMC Hummer EV","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UnderCover Swing Case is a \u003cstrong\u003etruck bed toolbox\u003c\/strong\u003e, not a tonneau cover. It mounts to the inner wall of your bed in the dead space between the rear wheel well and the tailgate, then swings out 180 degrees on heavy-duty steel hinges so you can reach your gear without climbing into the bed.\u003c\/p\u003e\n\u003cp\u003eEach Swing Case holds up to 75 pounds of tools, recovery gear, or jobsite supplies without cutting into your usable bed length or minimum width. The composite shell resists corrosion, the weather-sealed lid keeps dust and moisture out, and the key-lockable rotary handle keeps your stuff locked down. Driver-side and passenger-side cases are sold separately, so you can run one or both.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Swing Case Is Different\u003c\/h2\u003e\n\u003cp\u003eMost truck bed toolboxes are crossover boxes that eat up two feet of bed length and force you to load cargo around them. The Swing Case uses a piece of bed real estate that usually sits empty, the space above the wheel well, and turns it into secured storage. Your bed stays open for lumber, coolers, dirt bikes, or whatever else you haul.\u003c\/p\u003e\n\u003cp\u003eThe case also works \u003cstrong\u003eunder any tonneau cover\u003c\/strong\u003e. Pair it with a roll-up, folding, or retractable cover and you get lockable tool storage plus a covered bed. Running an open bed truck is fine too. The heavy-duty lid seal means the Swing Case can stand up to the weather on its own.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSwings Out to You\u003c\/strong\u003e Pull the latch and the case rotates out over the tailgate on steel hinges, so you get full access without leaning into the bed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e75-Pound Capacity\u003c\/strong\u003e Room for tools, recovery straps, tie-downs, jumper cables, a first aid kit, or anything else you want to keep off the bed floor.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLockable Security\u003c\/strong\u003e Key-lockable rotary handle protects tools from theft and keeps the lid latched shut on rough roads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable in Seconds\u003c\/strong\u003e The case lifts off the hinge when you need max bed space or want to carry your tools to the jobsite or a roadside repair.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorks Under a Tonneau\u003c\/strong\u003e Designed to fit beneath UnderCover tonneau covers and most other brands, so you can stack storage and bed protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Specs\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rugged composite (ABS polymer) construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHinges:\u003c\/strong\u003e Heavy-duty steel, 180 degree swing-out\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Method:\u003c\/strong\u003e Key-lockable rotary handle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeather Seal:\u003c\/strong\u003e Heavy-duty lid seal against dust, dirt, and moisture\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e Up to 75 lbs per case\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOuter Dimensions:\u003c\/strong\u003e Upper case 29 in L, lower case 15 in L, 8 in W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInner Dimensions:\u003c\/strong\u003e 15 in max depth, 8 in min depth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Driver-side and passenger-side sold separately\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Proudly assembled in Missouri\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year limited warranty on the ABS polymer structure, lock, hinges, and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is straightforward and typically takes about an hour or less per case. Some drilling is required into the inner bed wall, but all required mounting hardware is included in the box. Most owners handle the install in the driveway with basic hand tools.\u003c\/p\u003e\n\u003ch3\u003eInstall Video\u003c\/h3\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/6M7gMRFIrw8\" title=\"UnderCover Swing Case Truck Bed Toolbox Install\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eOverview Video\u003c\/h2\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/dnXtuwO631s\" title=\"UnderCover Swing Case Truck Bed Toolbox Overview\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSwing Case toolbox (driver-side or passenger-side, per the variant you select)\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty steel hinge mount\u003c\/li\u003e\n  \u003cli\u003eLid seal\u003c\/li\u003e\n  \u003cli\u003eKey-lockable rotary handle with keys\u003c\/li\u003e\n  \u003cli\u003eAll required mounting hardware\u003c\/li\u003e\n  \u003cli\u003eInstall instructions\u003c\/li\u003e\n  \u003cli\u003eWarranty registration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout UnderCover\u003c\/h2\u003e\n\u003cp\u003eUnderCover builds tonneau covers and truck bed storage out of the United States and is part of the RealTruck family. The Swing Case has been a staple of the UnderCover lineup for years and is a favorite among contractors, overlanders, and weekend haulers who need locked storage without giving up a usable bed.\u003c\/p\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eSwing Case fitment is specific to your truck's year, make, model, and side (driver or passenger). Before you order, call or text us at \u003cstrong\u003e(623) 272-6510\u003c\/strong\u003e so we can confirm the correct part number for your truck. \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e when you verify with our team first.\u003c\/p\u003e\n\n\u003cp\u003eLooking for other UnderCover gear? Browse the full \u003ca href=\"\/collections\/undercover\"\u003eUnderCover collection\u003c\/a\u003e for tonneau covers and bed storage that work together.\u003c\/p\u003e","brand":"UnderCover","offers":[{"title":"Default Title","offer_id":53316594991403,"sku":"SC106P","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/c9fac2b66a30b4351883cfa709ec3b78_22c9d666-982c-4157-8a5d-7a10aaba0ffa.jpg?v=1776914637"},{"product_id":"undercover-swing-case-truck-bed-toolbox-for-2022-2026-nissan-frontier","title":"UnderCover Swing Case Truck Bed Toolbox | For 2022 to 2026 Nissan Frontier","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UnderCover Swing Case is a \u003cstrong\u003etruck bed toolbox\u003c\/strong\u003e, not a tonneau cover. It mounts to the inner wall of your bed in the dead space between the rear wheel well and the tailgate, then swings out 180 degrees on heavy-duty steel hinges so you can reach your gear without climbing into the bed.\u003c\/p\u003e\n\u003cp\u003eEach Swing Case holds up to 75 pounds of tools, recovery gear, or jobsite supplies without cutting into your usable bed length or minimum width. The composite shell resists corrosion, the weather-sealed lid keeps dust and moisture out, and the key-lockable rotary handle keeps your stuff locked down. Driver-side and passenger-side cases are sold separately, so you can run one or both.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Swing Case Is Different\u003c\/h2\u003e\n\u003cp\u003eMost truck bed toolboxes are crossover boxes that eat up two feet of bed length and force you to load cargo around them. The Swing Case uses a piece of bed real estate that usually sits empty, the space above the wheel well, and turns it into secured storage. Your bed stays open for lumber, coolers, dirt bikes, or whatever else you haul.\u003c\/p\u003e\n\u003cp\u003eThe case also works \u003cstrong\u003eunder any tonneau cover\u003c\/strong\u003e. Pair it with a roll-up, folding, or retractable cover and you get lockable tool storage plus a covered bed. Running an open bed truck is fine too. The heavy-duty lid seal means the Swing Case can stand up to the weather on its own.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSwings Out to You\u003c\/strong\u003e Pull the latch and the case rotates out over the tailgate on steel hinges, so you get full access without leaning into the bed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e75-Pound Capacity\u003c\/strong\u003e Room for tools, recovery straps, tie-downs, jumper cables, a first aid kit, or anything else you want to keep off the bed floor.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLockable Security\u003c\/strong\u003e Key-lockable rotary handle protects tools from theft and keeps the lid latched shut on rough roads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable in Seconds\u003c\/strong\u003e The case lifts off the hinge when you need max bed space or want to carry your tools to the jobsite or a roadside repair.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorks Under a Tonneau\u003c\/strong\u003e Designed to fit beneath UnderCover tonneau covers and most other brands, so you can stack storage and bed protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Specs\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rugged composite (ABS polymer) construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHinges:\u003c\/strong\u003e Heavy-duty steel, 180 degree swing-out\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Method:\u003c\/strong\u003e Key-lockable rotary handle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeather Seal:\u003c\/strong\u003e Heavy-duty lid seal against dust, dirt, and moisture\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e Up to 75 lbs per case\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOuter Dimensions:\u003c\/strong\u003e Upper case 29 in L, lower case 15 in L, 8 in W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInner Dimensions:\u003c\/strong\u003e 15 in max depth, 8 in min depth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Driver-side and passenger-side sold separately\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Proudly assembled in Missouri\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year limited warranty on the ABS polymer structure, lock, hinges, and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is straightforward and typically takes about an hour or less per case. Some drilling is required into the inner bed wall, but all required mounting hardware is included in the box. Most owners handle the install in the driveway with basic hand tools.\u003c\/p\u003e\n\u003ch3\u003eInstall Video\u003c\/h3\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/6M7gMRFIrw8\" title=\"UnderCover Swing Case Truck Bed Toolbox Install\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eOverview Video\u003c\/h2\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/dnXtuwO631s\" title=\"UnderCover Swing Case Truck Bed Toolbox Overview\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSwing Case toolbox (driver-side or passenger-side, per the variant you select)\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty steel hinge mount\u003c\/li\u003e\n  \u003cli\u003eLid seal\u003c\/li\u003e\n  \u003cli\u003eKey-lockable rotary handle with keys\u003c\/li\u003e\n  \u003cli\u003eAll required mounting hardware\u003c\/li\u003e\n  \u003cli\u003eInstall instructions\u003c\/li\u003e\n  \u003cli\u003eWarranty registration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout UnderCover\u003c\/h2\u003e\n\u003cp\u003eUnderCover builds tonneau covers and truck bed storage out of the United States and is part of the RealTruck family. The Swing Case has been a staple of the UnderCover lineup for years and is a favorite among contractors, overlanders, and weekend haulers who need locked storage without giving up a usable bed.\u003c\/p\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eSwing Case fitment is specific to your truck's year, make, model, and side (driver or passenger). Before you order, call or text us at \u003cstrong\u003e(623) 272-6510\u003c\/strong\u003e so we can confirm the correct part number for your truck. \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e when you verify with our team first.\u003c\/p\u003e\n\n\u003cp\u003eLooking for other UnderCover gear? Browse the full \u003ca href=\"\/collections\/undercover\"\u003eUnderCover collection\u003c\/a\u003e for tonneau covers and bed storage that work together.\u003c\/p\u003e","brand":"UnderCover","offers":[{"title":"Passenger Side Toolbox","offer_id":53316595056939,"sku":"SC503P","price":179.99,"currency_code":"USD","in_stock":true},{"title":"Driver Side Toolbox","offer_id":53316595089707,"sku":"SC503D","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/c9fac2b66a30b4351883cfa709ec3b78_299629de-e2cb-4ccb-8a89-b60cb1206f7e.jpg?v=1776914637"},{"product_id":"undercover-swing-case-truck-bed-toolbox-for-07-18-chevrolet-silverado-gmc-sierra-1500-07-19-2500-3500","title":"UnderCover Swing Case Truck Bed Toolbox | For 07-18 Chevrolet Silverado\/GMC Sierra 1500 \u0026 07-19 2500\/3500","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UnderCover Swing Case is a \u003cstrong\u003etruck bed toolbox\u003c\/strong\u003e, not a tonneau cover. It mounts to the inner wall of your bed in the dead space between the rear wheel well and the tailgate, then swings out 180 degrees on heavy-duty steel hinges so you can reach your gear without climbing into the bed.\u003c\/p\u003e\n\u003cp\u003eEach Swing Case holds up to 75 pounds of tools, recovery gear, or jobsite supplies without cutting into your usable bed length or minimum width. The composite shell resists corrosion, the weather-sealed lid keeps dust and moisture out, and the key-lockable rotary handle keeps your stuff locked down. Driver-side and passenger-side cases are sold separately, so you can run one or both.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Swing Case Is Different\u003c\/h2\u003e\n\u003cp\u003eMost truck bed toolboxes are crossover boxes that eat up two feet of bed length and force you to load cargo around them. The Swing Case uses a piece of bed real estate that usually sits empty, the space above the wheel well, and turns it into secured storage. Your bed stays open for lumber, coolers, dirt bikes, or whatever else you haul.\u003c\/p\u003e\n\u003cp\u003eThe case also works \u003cstrong\u003eunder any tonneau cover\u003c\/strong\u003e. Pair it with a roll-up, folding, or retractable cover and you get lockable tool storage plus a covered bed. Running an open bed truck is fine too. The heavy-duty lid seal means the Swing Case can stand up to the weather on its own.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSwings Out to You\u003c\/strong\u003e Pull the latch and the case rotates out over the tailgate on steel hinges, so you get full access without leaning into the bed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e75-Pound Capacity\u003c\/strong\u003e Room for tools, recovery straps, tie-downs, jumper cables, a first aid kit, or anything else you want to keep off the bed floor.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLockable Security\u003c\/strong\u003e Key-lockable rotary handle protects tools from theft and keeps the lid latched shut on rough roads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable in Seconds\u003c\/strong\u003e The case lifts off the hinge when you need max bed space or want to carry your tools to the jobsite or a roadside repair.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorks Under a Tonneau\u003c\/strong\u003e Designed to fit beneath UnderCover tonneau covers and most other brands, so you can stack storage and bed protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Specs\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rugged composite (ABS polymer) construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHinges:\u003c\/strong\u003e Heavy-duty steel, 180 degree swing-out\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Method:\u003c\/strong\u003e Key-lockable rotary handle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeather Seal:\u003c\/strong\u003e Heavy-duty lid seal against dust, dirt, and moisture\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e Up to 75 lbs per case\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOuter Dimensions:\u003c\/strong\u003e Upper case 29 in L, lower case 15 in L, 8 in W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInner Dimensions:\u003c\/strong\u003e 15 in max depth, 8 in min depth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Driver-side and passenger-side sold separately\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Proudly assembled in Missouri\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year limited warranty on the ABS polymer structure, lock, hinges, and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is straightforward and typically takes about an hour or less per case. Some drilling is required into the inner bed wall, but all required mounting hardware is included in the box. Most owners handle the install in the driveway with basic hand tools.\u003c\/p\u003e\n\u003ch3\u003eInstall Video\u003c\/h3\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/6M7gMRFIrw8\" title=\"UnderCover Swing Case Truck Bed Toolbox Install\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eOverview Video\u003c\/h2\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/dnXtuwO631s\" title=\"UnderCover Swing Case Truck Bed Toolbox Overview\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSwing Case toolbox (driver-side or passenger-side, per the variant you select)\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty steel hinge mount\u003c\/li\u003e\n  \u003cli\u003eLid seal\u003c\/li\u003e\n  \u003cli\u003eKey-lockable rotary handle with keys\u003c\/li\u003e\n  \u003cli\u003eAll required mounting hardware\u003c\/li\u003e\n  \u003cli\u003eInstall instructions\u003c\/li\u003e\n  \u003cli\u003eWarranty registration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout UnderCover\u003c\/h2\u003e\n\u003cp\u003eUnderCover builds tonneau covers and truck bed storage out of the United States and is part of the RealTruck family. The Swing Case has been a staple of the UnderCover lineup for years and is a favorite among contractors, overlanders, and weekend haulers who need locked storage without giving up a usable bed.\u003c\/p\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eSwing Case fitment is specific to your truck's year, make, model, and side (driver or passenger). Before you order, call or text us at \u003cstrong\u003e(623) 272-6510\u003c\/strong\u003e so we can confirm the correct part number for your truck. \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e when you verify with our team first.\u003c\/p\u003e\n\n\u003cp\u003eLooking for other UnderCover gear? Browse the full \u003ca href=\"\/collections\/undercover\"\u003eUnderCover collection\u003c\/a\u003e for tonneau covers and bed storage that work together.\u003c\/p\u003e","brand":"UnderCover","offers":[{"title":"Passenger Side Toolbox","offer_id":53316596302123,"sku":"SC100P","price":179.99,"currency_code":"USD","in_stock":true},{"title":"Driver Side Toolbox","offer_id":53316596334891,"sku":"SC100D","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/c9fac2b66a30b4351883cfa709ec3b78_41f5111b-83d5-4030-99ba-ebec966232d2.jpg?v=1776914639"},{"product_id":"undercover-swing-case-truck-bed-toolbox-for-2017-2026-ford-f-250-350","title":"UnderCover Swing Case Truck Bed Toolbox | For 2017 to 2026 Ford F-250\/350","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UnderCover Swing Case is a \u003cstrong\u003etruck bed toolbox\u003c\/strong\u003e, not a tonneau cover. It mounts to the inner wall of your bed in the dead space between the rear wheel well and the tailgate, then swings out 180 degrees on heavy-duty steel hinges so you can reach your gear without climbing into the bed.\u003c\/p\u003e\n\u003cp\u003eEach Swing Case holds up to 75 pounds of tools, recovery gear, or jobsite supplies without cutting into your usable bed length or minimum width. The composite shell resists corrosion, the weather-sealed lid keeps dust and moisture out, and the key-lockable rotary handle keeps your stuff locked down. Driver-side and passenger-side cases are sold separately, so you can run one or both.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Swing Case Is Different\u003c\/h2\u003e\n\u003cp\u003eMost truck bed toolboxes are crossover boxes that eat up two feet of bed length and force you to load cargo around them. The Swing Case uses a piece of bed real estate that usually sits empty, the space above the wheel well, and turns it into secured storage. Your bed stays open for lumber, coolers, dirt bikes, or whatever else you haul.\u003c\/p\u003e\n\u003cp\u003eThe case also works \u003cstrong\u003eunder any tonneau cover\u003c\/strong\u003e. Pair it with a roll-up, folding, or retractable cover and you get lockable tool storage plus a covered bed. Running an open bed truck is fine too. The heavy-duty lid seal means the Swing Case can stand up to the weather on its own.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSwings Out to You\u003c\/strong\u003e Pull the latch and the case rotates out over the tailgate on steel hinges, so you get full access without leaning into the bed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e75-Pound Capacity\u003c\/strong\u003e Room for tools, recovery straps, tie-downs, jumper cables, a first aid kit, or anything else you want to keep off the bed floor.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLockable Security\u003c\/strong\u003e Key-lockable rotary handle protects tools from theft and keeps the lid latched shut on rough roads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable in Seconds\u003c\/strong\u003e The case lifts off the hinge when you need max bed space or want to carry your tools to the jobsite or a roadside repair.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorks Under a Tonneau\u003c\/strong\u003e Designed to fit beneath UnderCover tonneau covers and most other brands, so you can stack storage and bed protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Specs\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rugged composite (ABS polymer) construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHinges:\u003c\/strong\u003e Heavy-duty steel, 180 degree swing-out\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Method:\u003c\/strong\u003e Key-lockable rotary handle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeather Seal:\u003c\/strong\u003e Heavy-duty lid seal against dust, dirt, and moisture\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e Up to 75 lbs per case\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOuter Dimensions:\u003c\/strong\u003e Upper case 29 in L, lower case 15 in L, 8 in W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInner Dimensions:\u003c\/strong\u003e 15 in max depth, 8 in min depth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Driver-side and passenger-side sold separately\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Proudly assembled in Missouri\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year limited warranty on the ABS polymer structure, lock, hinges, and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is straightforward and typically takes about an hour or less per case. Some drilling is required into the inner bed wall, but all required mounting hardware is included in the box. Most owners handle the install in the driveway with basic hand tools.\u003c\/p\u003e\n\u003ch3\u003eInstall Video\u003c\/h3\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/6M7gMRFIrw8\" title=\"UnderCover Swing Case Truck Bed Toolbox Install\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eOverview Video\u003c\/h2\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/dnXtuwO631s\" title=\"UnderCover Swing Case Truck Bed Toolbox Overview\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSwing Case toolbox (driver-side or passenger-side, per the variant you select)\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty steel hinge mount\u003c\/li\u003e\n  \u003cli\u003eLid seal\u003c\/li\u003e\n  \u003cli\u003eKey-lockable rotary handle with keys\u003c\/li\u003e\n  \u003cli\u003eAll required mounting hardware\u003c\/li\u003e\n  \u003cli\u003eInstall instructions\u003c\/li\u003e\n  \u003cli\u003eWarranty registration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout UnderCover\u003c\/h2\u003e\n\u003cp\u003eUnderCover builds tonneau covers and truck bed storage out of the United States and is part of the RealTruck family. The Swing Case has been a staple of the UnderCover lineup for years and is a favorite among contractors, overlanders, and weekend haulers who need locked storage without giving up a usable bed.\u003c\/p\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eSwing Case fitment is specific to your truck's year, make, model, and side (driver or passenger). Before you order, call or text us at \u003cstrong\u003e(623) 272-6510\u003c\/strong\u003e so we can confirm the correct part number for your truck. \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e when you verify with our team first.\u003c\/p\u003e\n\n\u003cp\u003eLooking for other UnderCover gear? Browse the full \u003ca href=\"\/collections\/undercover\"\u003eUnderCover collection\u003c\/a\u003e for tonneau covers and bed storage that work together.\u003c\/p\u003e","brand":"UnderCover","offers":[{"title":"Driver Side Toolbox","offer_id":53316597481771,"sku":"SC205D","price":179.99,"currency_code":"USD","in_stock":true},{"title":"Passenger Side Toolbox","offer_id":53316597514539,"sku":"SC205P","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/c9fac2b66a30b4351883cfa709ec3b78_aae1686c-6dae-4911-b84a-f38677a4070e.jpg?v=1776914641"},{"product_id":"undercover-swing-case-truck-bed-toolbox-for-2020-2026-jeep-gladiator","title":"UnderCover Swing Case Truck Bed Toolbox | For 2020 to 2026 Jeep Gladiator","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe UnderCover Swing Case is a \u003cstrong\u003etruck bed toolbox\u003c\/strong\u003e, not a tonneau cover. It mounts to the inner wall of your bed in the dead space between the rear wheel well and the tailgate, then swings out 180 degrees on heavy-duty steel hinges so you can reach your gear without climbing into the bed.\u003c\/p\u003e\n\u003cp\u003eEach Swing Case holds up to 75 pounds of tools, recovery gear, or jobsite supplies without cutting into your usable bed length or minimum width. The composite shell resists corrosion, the weather-sealed lid keeps dust and moisture out, and the key-lockable rotary handle keeps your stuff locked down. Driver-side and passenger-side cases are sold separately, so you can run one or both.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Swing Case Is Different\u003c\/h2\u003e\n\u003cp\u003eMost truck bed toolboxes are crossover boxes that eat up two feet of bed length and force you to load cargo around them. The Swing Case uses a piece of bed real estate that usually sits empty, the space above the wheel well, and turns it into secured storage. Your bed stays open for lumber, coolers, dirt bikes, or whatever else you haul.\u003c\/p\u003e\n\u003cp\u003eThe case also works \u003cstrong\u003eunder any tonneau cover\u003c\/strong\u003e. Pair it with a roll-up, folding, or retractable cover and you get lockable tool storage plus a covered bed. Running an open bed truck is fine too. The heavy-duty lid seal means the Swing Case can stand up to the weather on its own.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSwings Out to You\u003c\/strong\u003e Pull the latch and the case rotates out over the tailgate on steel hinges, so you get full access without leaning into the bed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e75-Pound Capacity\u003c\/strong\u003e Room for tools, recovery straps, tie-downs, jumper cables, a first aid kit, or anything else you want to keep off the bed floor.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLockable Security\u003c\/strong\u003e Key-lockable rotary handle protects tools from theft and keeps the lid latched shut on rough roads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable in Seconds\u003c\/strong\u003e The case lifts off the hinge when you need max bed space or want to carry your tools to the jobsite or a roadside repair.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWorks Under a Tonneau\u003c\/strong\u003e Designed to fit beneath UnderCover tonneau covers and most other brands, so you can stack storage and bed protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures and Specs\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Rugged composite (ABS polymer) construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHinges:\u003c\/strong\u003e Heavy-duty steel, 180 degree swing-out\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Method:\u003c\/strong\u003e Key-lockable rotary handle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeather Seal:\u003c\/strong\u003e Heavy-duty lid seal against dust, dirt, and moisture\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoad Capacity:\u003c\/strong\u003e Up to 75 lbs per case\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOuter Dimensions:\u003c\/strong\u003e Upper case 29 in L, lower case 15 in L, 8 in W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInner Dimensions:\u003c\/strong\u003e 15 in max depth, 8 in min depth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Driver-side and passenger-side sold separately\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Proudly assembled in Missouri\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1-year limited warranty on the ABS polymer structure, lock, hinges, and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstallation is straightforward and typically takes about an hour or less per case. Some drilling is required into the inner bed wall, but all required mounting hardware is included in the box. Most owners handle the install in the driveway with basic hand tools.\u003c\/p\u003e\n\u003ch3\u003eInstall Video\u003c\/h3\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/6M7gMRFIrw8\" title=\"UnderCover Swing Case Truck Bed Toolbox Install\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eOverview Video\u003c\/h2\u003e\n\u003cdiv class=\"video-embed\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/dnXtuwO631s\" title=\"UnderCover Swing Case Truck Bed Toolbox Overview\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSwing Case toolbox (driver-side or passenger-side, per the variant you select)\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty steel hinge mount\u003c\/li\u003e\n  \u003cli\u003eLid seal\u003c\/li\u003e\n  \u003cli\u003eKey-lockable rotary handle with keys\u003c\/li\u003e\n  \u003cli\u003eAll required mounting hardware\u003c\/li\u003e\n  \u003cli\u003eInstall instructions\u003c\/li\u003e\n  \u003cli\u003eWarranty registration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout UnderCover\u003c\/h2\u003e\n\u003cp\u003eUnderCover builds tonneau covers and truck bed storage out of the United States and is part of the RealTruck family. The Swing Case has been a staple of the UnderCover lineup for years and is a favorite among contractors, overlanders, and weekend haulers who need locked storage without giving up a usable bed.\u003c\/p\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eSwing Case fitment is specific to your truck's year, make, model, and side (driver or passenger). Before you order, call or text us at \u003cstrong\u003e(623) 272-6510\u003c\/strong\u003e so we can confirm the correct part number for your truck. \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e when you verify with our team first.\u003c\/p\u003e\n\n\u003cp\u003eLooking for other UnderCover gear? Browse the full \u003ca href=\"\/collections\/undercover\"\u003eUnderCover collection\u003c\/a\u003e for tonneau covers and bed storage that work together.\u003c\/p\u003e","brand":"UnderCover","offers":[{"title":"Passenger Side Toolbox","offer_id":53316599578923,"sku":"SC304P","price":179.99,"currency_code":"USD","in_stock":true},{"title":"Driver Side Toolbox","offer_id":53316599611691,"sku":"SC304D","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/c9fac2b66a30b4351883cfa709ec3b78_86820134-4763-4c54-ab46-35035d7a47d8.jpg?v=1776914648"},{"product_id":"highway-products-gullwing-box-71-x-16-x-23","title":"Highway Products Gullwing Box","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Highway Products Gullwing Box is an aluminum crossover tool box that sits behind your cab and spans the full width of the bed at 71 in x 16 in x 23 in. What sets it apart is the dual gullwing lid design. Two tapered lids open from both sides of the truck, so you reach your gear from the driver side or the passenger side without walking around to one fixed door. The raised center and lower lid entry give you pass-through storage, which means long items like levels, shovels, and axes lay flat across the box and stay secure on the road.\u003c\/p\u003e\n\u003cp\u003eThis box is built for work truck owners who haul tools every day and want fast access from wherever they are standing. If you run a full-size pickup and split your time between job sites, the side-to-side reach saves steps on every stop. The aluminum body, weather-resistant lids, and lifetime warranty make it a long-term setup, not a part you plan to replace.\u003c\/p\u003e\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual gullwing access\u003c\/strong\u003e: Two lids open from both sides of the truck, so you grab tools from the driver or passenger side without circling the bed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather-resistant RainMaster lids\u003c\/strong\u003e: An internal rain-gutter design channels water around the opening to help keep your tools dry through rain and wash-downs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull crossover storage\u003c\/strong\u003e: The behind-cab mount spans the bed width and the pass-through center holds long items like 4 ft levels that bind in a standard box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRust-free aluminum\u003c\/strong\u003e: High-grade aluminum construction will not rust, so the box holds up in salt, heat, and daily job-site use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid and base finish combos\u003c\/strong\u003e: Pair a Diamond Plate, Black Diamond Plate, Leopard, or Gladiator lid with a Smooth Aluminum or Smooth Black base to match your truck.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eHighway Products\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eCrossover Tool Box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e71 in x 16 in x 23 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eCrossover (behind cab)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLid Finish\u003c\/th\u003e\n\u003ctd\u003eDiamond Plate \/ Black Diamond Plate \/ Leopard \/ Gladiator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase Finish\u003c\/th\u003e\n\u003ctd\u003eSmooth Aluminum \/ Smooth Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eLifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThe Gullwing Box mounts as a crossover tool box, sitting on the bed rails behind the cab and spanning the full width of the bed. It uses a no-drill mount that clamps to the bed rails, so you do not have to put holes in your truck to set it up. The 71 in width is sized for full-size trucks, so confirm your bed rail spacing before you order. If you are not sure your truck fits or you want help matching the right mounting parts, call or text us first and we will verify it for you.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eCan you reach tools from both sides of the truck?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eYes. The Gullwing Box uses two tapered gullwing lids, one on each side, so you open the box and reach your gear from the driver side or the passenger side. You do not have to walk around the bed to a single fixed door.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat finish options are available?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eYou choose a lid finish and a base finish. Lid options include Diamond Plate, Black Diamond Plate, Leopard, and Gladiator. Base options include Smooth Aluminum and Smooth Black. A Boweyes option is also available to help secure items in the bed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eDo the lids lock?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eYes. Each lid uses a stainless-steel T-handle and a thick stainless-steel piano hinge to keep your tools secured. The metal handle and hinge are built to hold up to daily use and resist tampering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat trucks does this box fit?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eThe 71 in Gullwing Box is sized for full-size trucks and mounts across the bed rails behind the cab. It is not a standard fit for midsize trucks. If you want to confirm it fits your specific truck, call or text us before you order and we will check it.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eNot sure it fits your truck? Chat or call our team at (623) 272-6510 before you order to activate our \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e Promise.\u003c\/p\u003e\n","brand":"Highway Products","offers":[{"title":"Black Diamond Plate \/ Smooth Black \/ No","offer_id":53753431195947,"sku":"3412-005-BK62","price":1489.88,"currency_code":"USD","in_stock":true},{"title":"Leopard \/ Smooth Black \/ No","offer_id":53753431228715,"sku":"3412-005-BK62S","price":1533.21,"currency_code":"USD","in_stock":false},{"title":"Diamond Plate \/ Smooth Aluminum \/ No","offer_id":53753431261483,"sku":"3412-005","price":1349.28,"currency_code":"USD","in_stock":true},{"title":"Leopard \/ Smooth Black \/ Yes","offer_id":53753431294251,"sku":"3412-015-BK62S","price":1583.51,"currency_code":"USD","in_stock":true},{"title":"Diamond Plate \/ Smooth Aluminum \/ Yes","offer_id":53753431327019,"sku":"3412-015","price":1393.29,"currency_code":"USD","in_stock":true},{"title":"Black Diamond Plate \/ Smooth Black \/ Yes","offer_id":53753431359787,"sku":"3412-015-BK62","price":1540.17,"currency_code":"USD","in_stock":true},{"title":"Diamond Plate \/ Polished Aluminum \/ Yes","offer_id":53753431392555,"sku":"3430-002","price":1438.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/Black-Diamond-Plate-Lid-with-SMooth-Aluminum-Base-Right-Open.jpg?v=1781240859"},{"product_id":"highway-products-high-side-tool-box","title":"Highway Products High Side Tool Box","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Highway Products High Side Tool Box is an aluminum tool box that mounts on top of your truck bed rails. It sits up high along the side of the bed, so you grab your tools from the ground instead of climbing in and reaching across the floor. The bed itself stays open and usable for the gear you haul every day.\u003c\/p\u003e\n\u003cp\u003eThis box is built for work truck owners, tradesmen, and anyone who keeps tools in the bed and wants them organized and locked up. The body is high grade aluminum with fully welded seams, no glue and no rivets, and every box is fabricated and assembled by hand. You pick a single door or double door layout and a length that matches your bed, with sizes that run from 48 inches up to 96 inches, and you choose from several finishes to match the truck.\u003c\/p\u003e\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGround-level access\u003c\/strong\u003e mounts on the bed rails and sits up high, so you reach your tools with your feet on the ground and skip the bending and climbing that comes with floor boxes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather-resistant RainMaster doors\u003c\/strong\u003e use an internal rain gutter and automotive weather stripping around the opening to channel water away and help keep your tools dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking security\u003c\/strong\u003e comes from a stainless steel T-handle and quarter-inch thick stainless steel piano hinges, so your gear stays shut and protected when you walk away from the truck.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAircraft-grade aluminum that will not rust\u003c\/strong\u003e keeps the box light but strong and lets it hold up in harsh weather and heavy daily use without rusting out like steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish options\u003c\/strong\u003e let you match the box to your truck with Smooth Aluminum, Smooth Black, Diamond Plate, Black Diamond Plate, Gladiator, and Leopard.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eHighway Products\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eTruck Tool Box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eBed rail (top mount)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDoor Style\u003c\/th\u003e\n\u003ctd\u003eSingle or Double Door\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSmooth Aluminum, Smooth Black, Diamond Plate, Black Diamond Plate, Gladiator, Leopard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eLifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThe box mounts to your bed rails as a top mount, sitting along the side of the bed so the floor stays clear. Give us a call before you order and we will confirm the right size and door layout for your truck.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eShould I get the single door or double door size?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eIt depends on your bed length and how much you want to store. The High Side comes in single door and double door layouts in sizes from 48 inches to 96 inches. A shorter single door box works for smaller beds, while a longer double door box gives you more room and two access points. If you are not sure which fits your truck, call or text us and we will help you pick.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat finishes are available?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eYou can choose from Smooth Aluminum, Smooth Black, Diamond Plate, Black Diamond Plate, Gladiator, and Leopard. The smooth finishes give you a clean shop look, while the diamond plate and patterned options bring a more rugged textured surface. Either way you can match the box to the rest of your truck and the look you are after.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eDoes the High Side Tool Box lock?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eYes. The box uses a stainless steel T-handle that locks, backed by quarter-inch thick stainless steel piano hinges. That hardware holds up to daily use and keeps the doors shut tight, so your tools stay protected when you leave the truck parked at a job site or in a lot overnight.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWill it fit my truck?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eThe High Side mounts on the bed rails and comes in a range of lengths to suit most trucks, so the right size depends on your bed. Call or text us with your year, make, model, and bed length before you buy, and we will confirm the box that fits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eNot sure it fits your truck? Chat or call our team at (623) 272-6510 before you order to activate our \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e Promise.\u003c\/p\u003e\n","brand":"Highway Products","offers":[{"title":"90\" x 16\" x 13\" (Double Door) \/ Smooth Black \/ Smooth Black","offer_id":53753431425323,"sku":"3813-013-BK62","price":1438.31,"currency_code":"USD","in_stock":false},{"title":"48\" x 16\" x 13\" (Single Door) \/ Smooth Black \/ Smooth Black","offer_id":53753431458091,"sku":"3813-001-BK62","price":916.35,"currency_code":"USD","in_stock":false},{"title":"90\" x 16\" x 13\" (Double Door) \/ Smooth Aluminum \/ Smooth Aluminum","offer_id":53753431490859,"sku":"3813-013","price":1174.72,"currency_code":"USD","in_stock":false},{"title":"72\" x 16\" x 13\" (Double Door) \/ Black Diamond Plate \/ Smooth Black","offer_id":53753431523627,"sku":"3813-011-BK62","price":1329.62,"currency_code":"USD","in_stock":false},{"title":"90\" x 16\" x 13\" (Double Door) \/ Diamond Plate \/ Smooth Aluminum","offer_id":53753431556395,"sku":"3813-015","price":1220.67,"currency_code":"USD","in_stock":false},{"title":"48\" x 16\" x 13\" (Single Door) \/ Diamond Plate \/ Smooth Aluminum","offer_id":53753431589163,"sku":"3813-003","price":772.11,"currency_code":"USD","in_stock":false},{"title":"48\" x 16\" x 13\" (Single Door) \/ Smooth Aluminum \/ Smooth Aluminum","offer_id":53753431621931,"sku":"3813-001","price":747.62,"currency_code":"USD","in_stock":false},{"title":"72\" x 16\" x 13\" (Double Door) \/ Smooth Aluminum \/ Smooth Aluminum","offer_id":53753431654699,"sku":"3813-009","price":1071.05,"currency_code":"USD","in_stock":true},{"title":"65\" x 16\" x 13\" (Double Door) \/ Smooth Black \/ Smooth Black","offer_id":53753431687467,"sku":"3813-005-BK62","price":1202.95,"currency_code":"USD","in_stock":false},{"title":"72\" x 16\" x 13\" (Double Door) \/ Smooth Black \/ Smooth Black","offer_id":53753431720235,"sku":"3813-009-BK62","price":1292.47,"currency_code":"USD","in_stock":false},{"title":"96\" x 16\" x 13\" (Double Door) \/ Smooth Black \/ Smooth Black","offer_id":53753431753003,"sku":"3813-017-BK62","price":1537.45,"currency_code":"USD","in_stock":false},{"title":"65\" x 16\" x 13\" (Double Door) \/ Smooth Aluminum \/ Smooth Aluminum","offer_id":53753431785771,"sku":"3813-005","price":986.79,"currency_code":"USD","in_stock":false},{"title":"90\" x 16\" x 13\" (Double Door) \/ Black Diamond Plate \/ Smooth Black","offer_id":53753431818539,"sku":"3813-015-BK62","price":1484.27,"currency_code":"USD","in_stock":true},{"title":"48\" x 16\" x 13\" (Single Door) \/ Gladiator \/ Smooth Black","offer_id":53753431851307,"sku":"3813-002-BK62","price":928.66,"currency_code":"USD","in_stock":true},{"title":"96\" x 16\" x 13\" (Double Door) \/ Diamond Plate \/ Smooth Aluminum","offer_id":53753431884075,"sku":"3813-019","price":1322.76,"currency_code":"USD","in_stock":false},{"title":"65\" x 16\" x 13\" (Double Door) \/ Black Diamond Plate \/ Smooth Black","offer_id":53753431916843,"sku":"3813-007-BK62","price":1207.26,"currency_code":"USD","in_stock":false},{"title":"65\" x 16\" x 13\" (Double Door) \/ Diamond Plate \/ Smooth Aluminum","offer_id":53753431949611,"sku":"3813-007","price":1028.03,"currency_code":"USD","in_stock":false},{"title":"48\" x 16\" x 13\" (Single Door) \/ Black Diamond Plate \/ Smooth Black","offer_id":53753431982379,"sku":"3813-003-BK62","price":940.84,"currency_code":"USD","in_stock":false},{"title":"72\" x 16\" x 13\" (Double Door) \/ Diamond Plate \/ Smooth Aluminum","offer_id":53753432015147,"sku":"3813-011","price":1108.22,"currency_code":"USD","in_stock":true},{"title":"96\" x 16\" x 13\" (Double Door) \/ Smooth Aluminum \/ Smooth Aluminum","offer_id":53753432047915,"sku":"3813-017","price":1273.86,"currency_code":"USD","in_stock":true},{"title":"96\" x 16\" x 13\" (Double Door) \/ Black Diamond Plate \/ Smooth Black","offer_id":53753432080683,"sku":"3813-019-BK62","price":1586.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/Black-Diamond-Plate-Doors-Center.jpg?v=1781240860"},{"product_id":"highway-products-low-side-tool-box","title":"Highway Products Low Side Tool Box","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Highway Products Low Side Tool Box mounts along your truck bed rails and sits lower than the High Side version, so you get secure storage without giving up your sightlines or easy bed access. The tapered lid keeps the profile down. If you can rest your elbow on the bed rail, you can reach into the box and grab what you need. That low stance also keeps the bed open, so hauling and loading stay simple.\u003c\/p\u003e\n\u003cp\u003eIt is built from .100 high grade aluminum, which is lightweight, rust-free, and made to hold up in rough conditions. Every seam is fully welded, with no glue or rivets, and the box ships with a removable aluminum tool tray for small parts and fittings. Highway Products backs it with a lifetime warranty, and it comes in several sizes for full-size trucks plus a range of finishes so you can match the look you want.\u003c\/p\u003e\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow profile design\u003c\/strong\u003e keeps the bed open and your sightlines clear, so you can still see over the rails and load gear without the box getting in the way.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather-resistant RainMaster doors\u003c\/strong\u003e use an internal rain-gutter channel around the opening to steer water away and help keep your gear protected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed-rail mount\u003c\/strong\u003e places storage where you can reach it from the ground, so grabbing tools and parts does not mean climbing into the bed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRust-free aluminum\u003c\/strong\u003e construction with fully welded seams stands up to harsh environments and holds its shape over years of work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid and base finish options\u003c\/strong\u003e let you mix finishes, like a Diamond Plate lid over a smooth aluminum base, so the box fits the look of your truck.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eHighway Products\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eTruck Tool Box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eBed rail (low side)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSmooth Aluminum, Smooth Black, Diamond Plate, Black Diamond Plate, Gladiator, Leopard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eLifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThe Low Side Tool Box mounts to your truck bed rails. It sets along the top of the bed walls and secures in place, so the storage rides at rail height where you can reach it from the side of the truck. Fit depends on your year, make, model, and bed length, so confirm the right size for your truck before you order. If you are not sure which box matches your bed, talk to us first and we will help you line up the correct fit.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat is the difference between the Low Side and High Side tool box?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eThe Low Side sits lower along the bed rails than the High Side, with a tapered lid that keeps the profile down. That gives you better visibility over the rails and easier reach into the box, while still adding secure bed-rail storage. The High Side stands taller and holds more, so the Low Side is the pick when you want to keep sightlines and bed access open.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat finishes are available?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eYou can choose from Smooth Aluminum, Smooth Black, Diamond Plate, Black Diamond Plate, Gladiator, and Leopard. The lid and base finishes can differ, so you can run a Diamond Plate or patterned lid over a smooth aluminum or smooth black base to get the look you want.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eDoes the tool box lock?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eYes. The box uses a stainless steel T-Handle, a stainless steel piano hinge, and a locking rod to keep your gear secured. The hardware is built to hold up against weather and wear while keeping the lid latched down.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWill this fit my truck?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eThe Low Side Tool Box comes in several sizes for full-size trucks, and the right one depends on your year, make, model, and bed length. Send us your truck details before you order and we will confirm the correct size so you get a box that fits your bed.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eNot sure it fits your truck? Chat or call our team at (623) 272-6510 before you order to activate our \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e Promise.\u003c\/p\u003e\n","brand":"Highway Products","offers":[{"title":"48\" x 16\" x 16\" \/ Gladiator \/ Smooth Black","offer_id":53753432113451,"sku":"3712-006-ALL","price":1123.56,"currency_code":"USD","in_stock":true},{"title":"60\" x 16\" x 16\" \/ Diamond Plate \/ Smooth Aluminum","offer_id":53753432146219,"sku":"3712-003","price":1197.49,"currency_code":"USD","in_stock":true},{"title":"48\" x 16\" x 16\" \/ Diamond Plate \/ Smooth Aluminum","offer_id":53753432178987,"sku":"3712-001","price":1011.9,"currency_code":"USD","in_stock":false},{"title":"60\" x 16\" x 16\" \/ Gladiator \/ Smooth Aluminum","offer_id":53753432211755,"sku":"3712-007","price":1243.86,"currency_code":"USD","in_stock":true},{"title":"48\" x 16\" x 16\" \/ Black Diamond Plate \/ Smooth Aluminum","offer_id":53753432244523,"sku":"3712-001-BK62","price":1080.33,"currency_code":"USD","in_stock":true},{"title":"48\" x 16\" x 16\" \/ Black Diamond Plate \/ Smooth Black","offer_id":53753432277291,"sku":"3712-001-BK62-ALL","price":1178.82,"currency_code":"USD","in_stock":true},{"title":"60\" x 16\" x 16\" \/ Black Diamond Plate \/ Smooth Black","offer_id":53753432310059,"sku":"3712-003-BK62-ALL","price":1376.71,"currency_code":"USD","in_stock":false},{"title":"60\" x 16\" x 16\" \/ Leopard \/ Smooth Black","offer_id":53753432342827,"sku":"3712-003-BK62S-ALL","price":1425.96,"currency_code":"USD","in_stock":false},{"title":"60\" x 16\" x 16\" \/ Gladiator \/ Smooth Black","offer_id":53753432375595,"sku":"3712-007-ALL","price":1342.34,"currency_code":"USD","in_stock":true},{"title":"48\" x 16\" x 16\" \/ Leopard \/ Smooth Black","offer_id":53753432408363,"sku":"3712-001-BK62S-ALL","price":1215.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/Black-Diamon-Plate-Lid-with-Smooth-Aluminum-Base-straight-open.jpg?v=1781240861"},{"product_id":"highway-products-single-lid-tool-box","title":"Highway Products Single Lid Tool Box","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Highway Products Single Lid Tool Box is an aluminum crossover box that mounts across the front of your truck bed, right behind the cab. One full-width lid covers the whole box, so you open it once and reach everything inside. It hangs from your bed rails and leaves clearance underneath, which keeps the bed floor open for longer gear. Sizes run about 70 inches wide in several depths, so you can match the box to your truck and how much you haul.\u003c\/p\u003e\n\u003cp\u003eThis box is built for the truck owner who keeps tools, recovery gear, or work supplies in the bed and wants them locked up and out of the weather. If you run a daily work truck, tow, camp, or just want to stop sliding loose gear around, a single-lid crossover gives you secure storage without a drawer system or a topper. It works for full-size trucks and pairs well with an open bed behind it.\u003c\/p\u003e\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-width single lid\u003c\/strong\u003e gives you one large opening, so loading long tools and reaching the far corners is easy with one hand on the handle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather-resistant RainMaster lid\u003c\/strong\u003e uses an overlapping design and weather stripping to help keep rain and dust off your gear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover mount across the bed front\u003c\/strong\u003e sets the box behind the cab and frees up the rest of the bed floor for longer loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAircraft-grade aluminum build\u003c\/strong\u003e stays rust-free in heat, salt, and wet weather, so the box holds up season after season.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid and base finish combinations\u003c\/strong\u003e let you match the look of your truck, with several lid styles paired to a smooth, black, or polished base.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eHighway Products\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eCrossover Tool Box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eCrossover (behind cab)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLid Finish\u003c\/th\u003e\n\u003ctd\u003eDiamond Plate \/ Black Diamond Plate \/ Leopard \/ Gladiator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase Finish\u003c\/th\u003e\n\u003ctd\u003eSmooth Aluminum \/ Smooth Black \/ Polished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eLifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThis box installs as a crossover mount. It sits across the front of the bed behind the cab and suspends from your truck side rails, so it does not sit flat on the bed floor. The hardware clamps to the bed rails, which means no drilling into your truck. Set the box in place, line it up square behind the cab, and secure the clamps per the included instructions. Most truck owners can handle the install with basic hand tools. If you tow a fifth wheel or gooseneck, measure your clearance first, since the box rides a few inches above the bed rail.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eDoes the Single Lid Tool Box fit my truck?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eThis is a crossover box sized for full-size trucks. It mounts across the bed behind the cab and clamps to your side rails, so it works across most full-size models. Call or text us with your truck and we will confirm the right size before you order.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat lid and base finishes can I choose?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eLids come in Diamond Plate, Black Diamond Plate, Leopard, and Gladiator. Bases come in Smooth Aluminum, Smooth Black, and Polished. You pick a lid and base combination to match your truck. Reach out if you want help pairing a look.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eDoes the tool box lock?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eYes. The box uses a stainless-steel T-handle, a heavy stainless piano hinge, and a locking rod to secure the lid. That keeps your tools and gear locked down when you walk away from the truck.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat fits inside the box?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eThe full-width lid opens to one large compartment, so you can store long tools, power equipment, recovery gear, and work supplies. A removable tray helps you keep smaller items sorted up top. Wider and deeper sizes hold more, so match the box to what you haul.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eNot sure it fits your truck? Chat or call our team at (623) 272-6510 before you order to activate our \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e Promise.\u003c\/p\u003e\n","brand":"Highway Products","offers":[{"title":"70\" x 16\" x 27\" \/ Diamond Plate \/ Smooth Aluminum","offer_id":53753432965419,"sku":"3213-011","price":1220.76,"currency_code":"USD","in_stock":false},{"title":"70\" x 16\" x 27\" \/ Leopard \/ Leopard","offer_id":53753432998187,"sku":"3222-002-BK62S","price":1631.36,"currency_code":"USD","in_stock":false},{"title":"70\" x 16\" x 20\" \/ Leopard \/ Smooth Black","offer_id":53753433030955,"sku":"3213-003-BK62S","price":1308.26,"currency_code":"USD","in_stock":false},{"title":"70\" x 16\" x 20\" \/ Diamond Plate \/ Diamond Plate","offer_id":53753433063723,"sku":"3222-001","price":1254.92,"currency_code":"USD","in_stock":false},{"title":"70\" x 16\" x 20\" \/ Diamond Plate \/ Polished Aluminum","offer_id":53753433096491,"sku":"3222-010","price":1329.32,"currency_code":"USD","in_stock":true},{"title":"70\" x 16\" x 20\" \/ Diamond Plate \/ Smooth Aluminum","offer_id":53753433129259,"sku":"3213-003","price":1097.37,"currency_code":"USD","in_stock":false},{"title":"70\" x 16\" x 23\" \/ Leopard \/ Leopard","offer_id":53753433162027,"sku":"3222-007-BK62S","price":1533.68,"currency_code":"USD","in_stock":true},{"title":"70\" x 16\" x 20\" \/ Leopard \/ Leopard","offer_id":53753433194795,"sku":"3222-001-BK62S","price":1516.1,"currency_code":"USD","in_stock":true},{"title":"70\" x 16\" x 23\" \/ Black Diamond Plate \/ Black Diamond Plate","offer_id":53753433227563,"sku":"3222-007-BK62","price":1435.2,"currency_code":"USD","in_stock":true},{"title":"70\" x 16\" x 23\" \/ Leopard \/ Smooth Black","offer_id":53753433260331,"sku":"3213-009-BK62S","price":1359.31,"currency_code":"USD","in_stock":true},{"title":"70\" x 16\" x 23\" \/ Gladiator \/ Gladiator","offer_id":53753433293099,"sku":"3222-004","price":1279.9,"currency_code":"USD","in_stock":true},{"title":"70\" x 16\" x 20\" \/ Black Diamond Plate \/ Smooth Black","offer_id":53753433325867,"sku":"3213-003-BK62","price":1259.02,"currency_code":"USD","in_stock":true},{"title":"70\" x 16\" x 23\" \/ Diamond Plate \/ Diamond Plate","offer_id":53753433358635,"sku":"3222-007","price":1299.78,"currency_code":"USD","in_stock":false},{"title":"70\" x 16\" x 27\" \/ Diamond Plate \/ Diamond Plate","offer_id":53753433391403,"sku":"3222-002","price":1371.22,"currency_code":"USD","in_stock":false},{"title":"70\" x 16\" x 27\" \/ Black Diamond Plate \/ Black Diamond Plate","offer_id":53753433424171,"sku":"3222-002-BK62","price":1532.87,"currency_code":"USD","in_stock":true},{"title":"70\" x 16\" x 27\" \/ Black Diamond Plate \/ Smooth Black","offer_id":53753433456939,"sku":"3213-011-BK62","price":1408.67,"currency_code":"USD","in_stock":true},{"title":"70\" x 16\" x 23\" \/ Black Diamond Plate \/ Smooth Black","offer_id":53753433489707,"sku":"3213-009-BK62","price":1310.07,"currency_code":"USD","in_stock":true},{"title":"70\" x 16\" x 23\" \/ Diamond Plate \/ Smooth Aluminum","offer_id":53753433522475,"sku":"3213-009","price":1148.39,"currency_code":"USD","in_stock":true},{"title":"70\" x 16\" x 20\" \/ Black Diamond Plate \/ Black Diamond Plate","offer_id":53753433555243,"sku":"3222-001-BK62","price":1417.61,"currency_code":"USD","in_stock":true},{"title":"70\" x 16\" x 27\" \/ Leopard \/ Smooth Black","offer_id":53753433588011,"sku":"3213-011-BK62S","price":1443.28,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/Black-Diamond-Plate-LId-with-Black-Diamond-Plate-Base-Left-Open.jpg?v=1781240862"},{"product_id":"highway-products-low-profile-tool-box-70-x-13-5","title":"Highway Products Low Profile Tool Box","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Highway Products Low Profile Tool Box is a crossover box that mounts behind the cab and sits low across your truck bed. It stands 13.5 inches tall and runs 70 inches wide, so it tucks under the line of your rear window instead of blocking it. You get secure, weather-resistant storage for tools and gear without giving up the view out the back of your truck.\u003c\/p\u003e\n\u003cp\u003eThis box is built from aluminum, so it stays rust-free and holds up in rough conditions. It fits full-size trucks and works well if you tow a fifth wheel or gooseneck, since the low height keeps the lid clear of the hitch in most setups. If you want strong storage behind the cab but hate losing rear visibility with a tall box, this is the one to look at. Highway Products backs it with a lifetime warranty.\u003c\/p\u003e\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow 13.5 inch profile:\u003c\/strong\u003e The short height keeps your rear window sightline open, so you keep more of your view through the rearview mirror and out the back glass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather-resistant RainMaster lid:\u003c\/strong\u003e The overlapping lid design and weather stripping help keep rain and dust out, so your tools and gear stay dry and protected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBehind-cab crossover storage:\u003c\/strong\u003e The saddle-style box mounts across the bed just behind the cab, so it locks down your gear while leaving most of the bed floor open for cargo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRust-free aluminum build:\u003c\/strong\u003e The aluminum body resists corrosion and stands up to harsh weather, so the box lasts through years of work without rusting out.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid and base finish combos:\u003c\/strong\u003e You pick the lid finish and base finish to match your truck, with Diamond Plate, Black Diamond Plate, Leopard, and Gladiator lids over Smooth Aluminum, Smooth Black, or Polished bases.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eHighway Products\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eCrossover Tool Box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003ctd\u003e13.5 in tall\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e70 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eCrossover (behind cab)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLid Finish\u003c\/th\u003e\n\u003ctd\u003eDiamond Plate \/ Black Diamond Plate \/ Leopard \/ Gladiator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBase Finish\u003c\/th\u003e\n\u003ctd\u003eSmooth Aluminum \/ Smooth Black \/ Polished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eLifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThis box installs as a crossover mount. It sets across the bed and secures behind the cab, sitting on the bed rails so you do not have to drill into your truck. Set the box in place, line it up behind the cab, and clamp it down. If you tow a fifth wheel or gooseneck, check that the lid clears your hitch before you load up and pull out, since trailer setups vary.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eHow is a low profile box different from a single lid crossover box?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eA low profile box sits lower across the bed, with a height of 13.5 inches, so it stays under your rear window line. A taller single lid crossover box gives you more storage volume but blocks more of the view out the back. If keeping your sightline open matters to you, the low profile box is the better pick.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWill this box block my rear window view?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eNo. The 13.5 inch profile is built to keep your rear window sightline open. It sits low enough to preserve much of your view through the rearview mirror and out the back glass, which is the main reason most buyers choose this box over a taller one.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat finish options can I choose?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eYou pick a lid finish and a base finish. Lid options are Diamond Plate, Black Diamond Plate, Leopard, and Gladiator. Base options are Smooth Aluminum, Smooth Black, and Polished. That lets you mix and match the look to suit your truck.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eDoes the box lock?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eYes. The box uses a stainless T-handle with a locking rod and a heavy stainless steel piano hinge, so your tools and gear stay secured behind the cab. The weather-resistant lid keeps the contents dry while the lock keeps them protected.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eNot sure it fits your truck? Chat or call our team at (623) 272-6510 before you order to activate our \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e Promise.\u003c\/p\u003e\n","brand":"Highway Products","offers":[{"title":"70\" x 13.5\" x 20\" \/ Leopard \/ Leopard","offer_id":53753433948459,"sku":"3322-002-BK62S","price":1448.02,"currency_code":"USD","in_stock":true},{"title":"70\" x 13.5\" x 27\" \/ Leopard \/ Leopard","offer_id":53753433981227,"sku":"3322-003-BK62S","price":1578.63,"currency_code":"USD","in_stock":true},{"title":"70\" x 13.5\" x 20\" \/ Gladiator \/ Gladiator","offer_id":53753434013995,"sku":"3313-001-BK62","price":1224.98,"currency_code":"USD","in_stock":true},{"title":"70\" x 13.5\" x 20\" \/ Diamond Plate \/ Diamond Plate","offer_id":53753434046763,"sku":"3322-002","price":1172.12,"currency_code":"USD","in_stock":false},{"title":"70\" x 13.5\" x 20\" \/ Black Diamond Plate \/ Smooth Black","offer_id":53753434079531,"sku":"3312-001-BK62","price":1254.11,"currency_code":"USD","in_stock":true},{"title":"70\" x 13.5\" x 20\" \/ Leopard \/ Smooth Black","offer_id":53753434112299,"sku":"3312-001-BK62S","price":1303.35,"currency_code":"USD","in_stock":false},{"title":"70\" x 13.5\" x 27\" \/ Leopard \/ Smooth Black","offer_id":53753434145067,"sku":"3322-005-BK62S","price":1409.8,"currency_code":"USD","in_stock":true},{"title":"70\" x 13.5\" x 23\" \/ Diamond Plate \/ Polished Aluminum","offer_id":53753434177835,"sku":"3330-003","price":1329.6,"currency_code":"USD","in_stock":true},{"title":"70\" x 13.5\" x 20\" \/ Black Diamond Plate \/ Black Diamond Plate","offer_id":53753434210603,"sku":"3322-002-BK62","price":1349.54,"currency_code":"USD","in_stock":true},{"title":"70\" x 13.5\" x 20\" \/ Diamond Plate \/ Smooth Aluminum","offer_id":53753434243371,"sku":"3312-001","price":1091.42,"currency_code":"USD","in_stock":true},{"title":"70\" x 13.5\" x 20\" \/ Gladiator \/ Smooth Black","offer_id":53753434276139,"sku":"3312-002","price":1212.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/Black-Diamond-Plate-Lid-with-Smooth-Black-Aluminum-Base-Right-Open.jpg?v=1781240864"},{"product_id":"highway-products-5th-wheel-tool-box","title":"Highway Products 5th Wheel Tool Box","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eWhen you pull a 5th-wheel or gooseneck trailer, the hitch eats up the front of your bed. A standard crossover box does not fit, and loose tools, chains, and straps end up sliding around or riding in the cab. The Highway Products 5th Wheel Tool Box is built to solve that. It sits low in the bed and is shaped around the hitch, so you get locking storage on a hauling truck without giving up the room your hitch needs.\u003c\/p\u003e\n\u003cp\u003eThis box is made for truck owners who tow heavy and need their gear organized and secured at the work site or the trailer. The back of the box is notched so the lid clears the front bulkhead and the hitch when it swings during sharp turns. The body is welded aluminum, so it stays light enough to handle and will not rust out from road salt, rain, or hard weather. Weather-resistant doors and lids help keep moisture off whatever you store inside.\u003c\/p\u003e\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaped to clear the hitch\u003c\/strong\u003e ,  The notched back and low-profile body let your 5th-wheel or gooseneck swing free without the lid getting in the way during tight turns.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage that stays in the bed\u003c\/strong\u003e ,  Keep your tools, chains, and tie-down straps locked in the bed of a hauling truck instead of loose in the cab or under the seat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather-resistant doors and lids\u003c\/strong\u003e ,  Overlapping lid design and weather stripping help keep rain and road spray out of your gear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRust-free aluminum body\u003c\/strong\u003e ,  Welded aluminum construction holds up to salt and harsh conditions and will not rust like a steel box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish options to match your truck\u003c\/strong\u003e ,  Choose Diamond Plate, Smooth Aluminum, Smooth Black, or Leopard so the box fits the look you want.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eHighway Products\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003e5th Wheel Tool Box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eTruck bed (around 5th-wheel\/gooseneck)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eDiamond Plate \/ Smooth Aluminum \/ Smooth Black \/ Leopard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eLifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThe box sits in the bed and is positioned around the hitch, low enough to stay below your bed rails. The notched back lets it push up against the front bulkhead while the lid still opens clear of the hitch. Mount it in the bed, check that your 5th-wheel or gooseneck has room to swing, and you are set. If you are not sure about your bed length or hitch setup, talk to us first and we will help you confirm the fit.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWill this box clear my 5th-wheel or gooseneck hitch?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eYes. The box is built low and the back is notched so the lid opens clear of the hitch and the front bulkhead. It sits below your bed rails so the trailer can swing during sharp turns without hitting the lid. Bed length and hitch type still matter, so confirm your setup with us before you order.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat can I store in it?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eIt is sized to hold the gear you haul with: hand tools, power tools, chains, binders, tie-down straps, and other trailer hardware. Keeping that gear locked in the bed frees up your cab and keeps everything in one spot when you are hooking up or working at the site.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat finishes can I choose?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eYou can choose Diamond Plate, Smooth Aluminum, Smooth Black, or Leopard. A Type option is also available. Pick the finish that matches your truck and the look you are after.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eHow is this different from a Partner box?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eA Partner box mounts to one side of the bed and leaves the rest of the bed open. The 5th Wheel Tool Box is shaped to fit around the hitch and run across the front of the bed, so it is the right choice when you tow a 5th-wheel or gooseneck and need storage that works with the hitch instead of around it. If you do not tow with a bed hitch, a Partner box may be the better fit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eNot sure it fits your truck? Chat or call our team at (623) 272-6510 before you order to activate our \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e Promise.\u003c\/p\u003e\n","brand":"Highway Products","offers":[{"title":"61\" x 19.5\" x 31\" \/ Standard \/ Black Diamond Plate","offer_id":53753434734891,"sku":"3022-005-BK62","price":1630.42,"currency_code":"USD","in_stock":false},{"title":"61\" x 19.5\" x 25\" \/ Standard \/ Diamond Plate","offer_id":53753434767659,"sku":"3022-003","price":1304.61,"currency_code":"USD","in_stock":true},{"title":"61\" x 19.5\" x 31\" \/ Standard \/ Leopard","offer_id":53753434800427,"sku":"3022-005-BK62S","price":1741.22,"currency_code":"USD","in_stock":false},{"title":"61\" x 19.5\" x 21\" \/ Standard \/ Diamond Plate","offer_id":53753434833195,"sku":"3022-002","price":1206.11,"currency_code":"USD","in_stock":false},{"title":"61\" x 19.5\" x 31\" \/ Standard \/ Diamond Plate","offer_id":53753434865963,"sku":"3022-005","price":1443.69,"currency_code":"USD","in_stock":true},{"title":"61\" x 19.5\" x 21\" \/ Standard \/ Leopard","offer_id":53753434898731,"sku":"3022-002-BK62S","price":1471.52,"currency_code":"USD","in_stock":false},{"title":"61\" x 19.5\" x 31\" \/ Standard \/ Gladiator","offer_id":53753434931499,"sku":"3013-001","price":1453.8,"currency_code":"USD","in_stock":true},{"title":"61\" x 19.5\" x 25\" \/ Standard \/ Black Diamond Plate","offer_id":53753434964267,"sku":"3022-003-BK62","price":1464.71,"currency_code":"USD","in_stock":true},{"title":"61\" x 19.5\" x 21\" \/ Notched \/ Diamond Plate","offer_id":53753434997035,"sku":"3022-004","price":1203.24,"currency_code":"USD","in_stock":true},{"title":"61\" x 19.5\" x 21\" \/ Notched \/ Black Diamond Plate","offer_id":53753435029803,"sku":"3022-004-BK62","price":1370.04,"currency_code":"USD","in_stock":false},{"title":"61\" x 19.5\" x 21\" \/ Standard \/ Black Diamond Plate","offer_id":53753435062571,"sku":"3022-002-BK62","price":1373.03,"currency_code":"USD","in_stock":false},{"title":"61\" x 19.5\" x 21\" \/ Notched \/ Leopard","offer_id":53753435095339,"sku":"3022-004-BK62S","price":1468.64,"currency_code":"USD","in_stock":false},{"title":"61\" x 19.5\" x 25\" \/ Standard \/ Leopard","offer_id":53753435128107,"sku":"3022-003-BK62S","price":1563.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/5th-wheel-tool-box.jpg?v=1781240864"},{"product_id":"highway-products-low-side-tool-box-90-x-16-x-16","title":"Highway Products Low Side Tool Box - 90in x 16in x 16in","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Highway Products Low Side Tool Box mounts along your truck bed rails and sits lower than the High Side version, so you get secure storage without giving up your sightlines or easy bed access. The tapered lid keeps the profile down. If you can rest your elbow on the bed rail, you can reach into the box and grab what you need. That low stance also keeps the bed open, so hauling and loading stay simple.\u003c\/p\u003e\n\u003cp\u003eIt is built from .100 high grade aluminum, which is lightweight, rust-free, and made to hold up in rough conditions. Every seam is fully welded, with no glue or rivets, and the box ships with a removable aluminum tool tray for small parts and fittings. Highway Products backs it with a lifetime warranty, and it comes in several sizes for full-size trucks plus a range of finishes so you can match the look you want.\u003c\/p\u003e\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow profile design\u003c\/strong\u003e keeps the bed open and your sightlines clear, so you can still see over the rails and load gear without the box getting in the way.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather-resistant RainMaster doors\u003c\/strong\u003e use an internal rain-gutter channel around the opening to steer water away and help keep your gear protected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBed-rail mount\u003c\/strong\u003e places storage where you can reach it from the ground, so grabbing tools and parts does not mean climbing into the bed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRust-free aluminum\u003c\/strong\u003e construction with fully welded seams stands up to harsh environments and holds its shape over years of work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid and base finish options\u003c\/strong\u003e let you mix finishes, like a Diamond Plate lid over a smooth aluminum base, so the box fits the look of your truck.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eHighway Products\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eTruck Tool Box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eBed rail (low side)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSmooth Aluminum, Smooth Black, Diamond Plate, Black Diamond Plate, Gladiator, Leopard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eLifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThe Low Side Tool Box mounts to your truck bed rails. It sets along the top of the bed walls and secures in place, so the storage rides at rail height where you can reach it from the side of the truck. Fit depends on your year, make, model, and bed length, so confirm the right size for your truck before you order. If you are not sure which box matches your bed, talk to us first and we will help you line up the correct fit.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat is the difference between the Low Side and High Side tool box?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eThe Low Side sits lower along the bed rails than the High Side, with a tapered lid that keeps the profile down. That gives you better visibility over the rails and easier reach into the box, while still adding secure bed-rail storage. The High Side stands taller and holds more, so the Low Side is the pick when you want to keep sightlines and bed access open.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat finishes are available?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eYou can choose from Smooth Aluminum, Smooth Black, Diamond Plate, Black Diamond Plate, Gladiator, and Leopard. The lid and base finishes can differ, so you can run a Diamond Plate or patterned lid over a smooth aluminum or smooth black base to get the look you want.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eDoes the tool box lock?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eYes. The box uses a stainless steel T-Handle, a stainless steel piano hinge, and a locking rod to keep your gear secured. The hardware is built to hold up against weather and wear while keeping the lid latched down.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWill this fit my truck?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cp itemprop=\"text\"\u003eThe Low Side Tool Box comes in several sizes for full-size trucks, and the right one depends on your year, make, model, and bed length. Send us your truck details before you order and we will confirm the correct size so you get a box that fits your bed.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eNot sure it fits your truck? Chat or call our team at (623) 272-6510 before you order to activate our \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e Promise.\u003c\/p\u003e\n","brand":"Highway Products","offers":[{"title":"Black Diamond Plate \/ Smooth Aluminum \/ Driver Side","offer_id":53753435160875,"sku":"3712-005-BK62","price":1506.48,"currency_code":"USD","in_stock":false},{"title":"Leopard \/ Smooth Black \/ Passenger Side","offer_id":53753435193643,"sku":"3712-004-BK62S-ALL","price":1678.83,"currency_code":"USD","in_stock":false},{"title":"Leopard \/ Smooth Aluminum \/ Passenger Side","offer_id":53753435226411,"sku":"3712-004-BK62S","price":1568.04,"currency_code":"USD","in_stock":true},{"title":"Diamond Plate \/ Smooth Aluminum \/ Driver Side","offer_id":53753435259179,"sku":"3712-005","price":1425.74,"currency_code":"USD","in_stock":true},{"title":"Leopard \/ Smooth Aluminum \/ Driver Side","offer_id":53753435291947,"sku":"3712-005-BK62S","price":1568.04,"currency_code":"USD","in_stock":true},{"title":"Gladiator \/ Smooth Aluminum \/ Passenger Side","offer_id":53753435324715,"sku":"3712-008","price":1518.8,"currency_code":"USD","in_stock":false},{"title":"Diamond Plate \/ Smooth Aluminum \/ Passenger Side","offer_id":53753435357483,"sku":"3712-004","price":1425.74,"currency_code":"USD","in_stock":true},{"title":"Leopard \/ Smooth Black \/ Driver Side","offer_id":53753435390251,"sku":"3712-005-BK62S-ALL","price":1678.83,"currency_code":"USD","in_stock":false},{"title":"Gladiator \/ Smooth Black \/ Passenger Side","offer_id":53753435423019,"sku":"3712-008-ALL","price":1629.59,"currency_code":"USD","in_stock":false},{"title":"Black Diamond Plate \/ Smooth Black \/ Passenger Side","offer_id":53753435455787,"sku":"3712-004-BK62-ALL","price":1617.28,"currency_code":"USD","in_stock":true},{"title":"Black Diamond Plate \/ Smooth Black \/ Driver Side","offer_id":53753435488555,"sku":"3712-005-BK62-ALL","price":1617.28,"currency_code":"USD","in_stock":false},{"title":"Gladiator \/ Smooth Aluminum \/ Driver Side","offer_id":53753435521323,"sku":"3712-009","price":1518.8,"currency_code":"USD","in_stock":false},{"title":"Black Diamond Plate \/ Smooth Aluminum \/ Passenger Side","offer_id":53753435554091,"sku":"3712-004-BK62","price":1506.48,"currency_code":"USD","in_stock":false},{"title":"Gladiator \/ Smooth Black \/ Driver Side","offer_id":53753435586859,"sku":"3712-009-ALL","price":1629.59,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/Black-Diamon-Plate-Lid-with-Smooth-Aluminum-Base-straight-open_12f3d730-e2b3-4890-98f1-eb271261e365.jpg?v=1781240865"},{"product_id":"highway-products-5th-wheel-partner-tool-box-58-x-10-5-x-18","title":"Highway Products 5th Wheel Partner Tool Box","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Highway Products 5th Wheel Partner Tool Box is built to work with your gooseneck or 5th wheel setup, not get in its way. It sits low in the bed behind the hitch and turns the dead space between your tailgate and the trailer tongue into locked, dry storage. If you already run a 5th Wheel Tool Box on one side, this companion box balances out the bed and gives you a second place to stash gear without crowding your hitch clearance.\u003c\/p\u003e\n\u003cp\u003eThis one fits the truck owner who tows and is tired of loose gear sliding around the bed. Chains, binders, chock blocks, jumper cables, extra oil, and the tools you grab often all get a home you can reach fast. At 58 inches wide and only 10.5 inches tall, it stays out of the way of trailer tongue swing while still holding a real load. It is the kind of box you bolt in once and stop thinking about.\u003c\/p\u003e\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePairs with the 5th Wheel box\u003c\/strong\u003e so you get balanced storage across the bed instead of weight and gear stacked on one side.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact 58 inch footprint\u003c\/strong\u003e fills the tight space behind the hitch and leaves room for the trailer tongue to clear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather-resistant lid\u003c\/strong\u003e uses an overlapping design and automotive weather stripping to keep rain and road spray off your gear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRust-free aluminum\u003c\/strong\u003e build holds up to heat, salt, and the harshest weather without corroding like steel boxes do.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish options\u003c\/strong\u003e let you match the look of your truck, with Diamond Plate, Black Diamond Plate, Leopard, and Gladiator on the table.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eHighway Products\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003e5th Wheel Tool Box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e58 in x 10.5 in x 18 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eTruck bed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eLifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThis box sits in the bed alongside your 5th wheel box, set toward the rear behind the gooseneck or 5th wheel hitch. That position uses the void in front of the tailgate and keeps the lid clear of the trailer tongue. It mounts to the truck bed, and you should run your printed instructions to confirm placement and hardware for your specific truck before you drill anything. Take a minute to check tongue clearance with your trailer hooked up so the low profile lid has room to open. Once it is secured, the box stays put through hard miles and rough roads.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eDo I need the 5th Wheel Tool Box too?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eNo. The Partner box works on its own as added storage behind your hitch. It is built to pair with the 5th Wheel Tool Box when you want balanced storage on both sides of the bed, but you can run it alone if that is all the space you need to cover.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat fits inside this box?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eMost owners keep towing gear and road essentials in it. Think chains, binders, chock blocks, jumper cables, extra motor oil, and the hand tools you reach for often. The 58 inch width gives you real room while the low profile keeps it clear of the trailer tongue.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat finishes are available?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eYou can choose from Diamond Plate, Black Diamond Plate, Leopard, and Gladiator finishes. That lets you match the box to the look of your truck and the rest of your bed setup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat are the dimensions?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eThis box measures 58 in x 10.5 in x 18 in. The wide, low profile is what lets it fit the tight space behind a gooseneck or 5th wheel hitch while leaving room for the trailer tongue to clear.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eNot sure it fits your truck? Chat or call our team at (623) 272-6510 before you order to activate our \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e Promise.\u003c\/p\u003e\n","brand":"Highway Products","offers":[{"title":"Black Diamond Plate","offer_id":53753435619627,"sku":"3122-001-BK62","price":1114.53,"currency_code":"USD","in_stock":true},{"title":"Leopard","offer_id":53753435652395,"sku":"3122-001-BK62S","price":1188.39,"currency_code":"USD","in_stock":true},{"title":"Diamond Plate","offer_id":53753435685163,"sku":"3122-001","price":964.15,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/Black-Diamond-Plate-Lid-and-Base-right_side_open.jpg?v=1781240866"},{"product_id":"chandler-underbody-aluminum-tread-plate-toolbox","title":"Chandler Underbody Aluminum Tread Plate Toolbox","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Chandler Underbody Aluminum Tread Plate Toolbox gives you lockable storage that hangs off the frame of your truck or trailer instead of taking up your bed. It is built from .125 inch aluminum diamond tread plate, so the lid stands up to boots, tools, and daily abuse without showing every scuff. Aluminum also means it will not rust, which matters when the box lives outside in rain, road salt, and sun year after year.\u003c\/p\u003e\n\u003cp\u003eThis is a work-truck and service-body box, not a weekend accessory. It uses a die-cast heavy-duty adjustable T-handle with a key lock and a padlock loop, a 2 inch continuous 11-gauge stainless steel piano hinge, and a commercial-grade one-piece gasket that seals out dust and weather. Each box is robotically welded and made in the USA, and it comes in multiple sizes plus single-door and barn-door styles so you can match it to your rig and your gear.\u003c\/p\u003e\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum tread plate body\u003c\/strong\u003e resists dents and dings from tools and gear, and it will not rust, so the box keeps working through Arizona heat or a salted winter road.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnderbody frame mount\u003c\/strong\u003e hangs the box below the bed rail, which frees up your entire truck bed for hauling instead of eating into your cargo space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDie-cast T-handle latch\u003c\/strong\u003e locks tight with a key and adds a padlock loop, while the one-piece gasket and stainless piano hinge keep the contents weather-resistant and secure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple sizes and door styles\u003c\/strong\u003e let you pick the capacity you need, with single-door and barn-door options to fit different frame lengths and access preferences.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRugged work-truck build\u003c\/strong\u003e uses robotic welds and a continuous stainless hinge for consistent, repeatable strength that holds up to job-site use every day.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eChandler Truck Accessories\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eUnderbody Tool Box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminum Tread Plate (.125 inch diamond plate)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLatch\u003c\/th\u003e\n\u003ctd\u003eDie-cast adjustable T-handle with key lock and padlock loop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHinge\u003c\/th\u003e\n\u003ctd\u003e2 inch continuous 11-gauge stainless steel piano hinge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal\u003c\/th\u003e\n\u003ctd\u003eCommercial-grade one-piece gasket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eUnderbody \/ frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes\u003c\/th\u003e\n\u003ctd\u003eMultiple, with single-door and barn-door styles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBuild\u003c\/th\u003e\n\u003ctd\u003eRobotically welded, made in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThis toolbox bolts to the frame or underbody of your truck or trailer. You mount it below the bed rail using the box mounting points and your frame rails, which keeps the bed open and puts the storage within easy reach from the side of the vehicle. Mounting needs vary by truck and by the size and door style you choose, so confirm the box dimensions against your available frame space before you order. If you are not sure which size fits your setup, call or text us and we will help you sort it out.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat is the difference between tread plate and smooth aluminum?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eTread plate, also called diamond plate, has a raised pattern across the surface. That texture hides scuffs and scratches from tools and boots far better than a smooth panel, so a work box still looks decent after years of job-site use. This Chandler box uses .125 inch aluminum diamond tread plate on the lid.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhere does this toolbox mount?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eIt mounts underbody, bolting to the frame below your bed rail on a truck or trailer. Because it hangs off the frame instead of sitting in the bed, you keep your full bed open for hauling while the box stays within reach from the side.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat sizes does it come in?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eThe Chandler underbody tread plate toolbox is offered in multiple sizes, with single-door and barn-door styles. Pick the capacity and door layout that match your frame length and the gear you carry. Confirm the box dimensions against your available frame space before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eDoes it lock?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eYes. It uses a die-cast heavy-duty adjustable T-handle with a key lock, plus a padlock loop if you want to add your own lock. Paired with the one-piece gasket and stainless steel piano hinge, the box stays secure and weather-resistant out on the road or in the field.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eNot sure it fits your truck? Chat or call our team at (623) 272-6510 before you order to activate our \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e Promise.\u003c\/p\u003e\n","brand":"Chandler Truck Accessories","offers":[{"title":"Default Title","offer_id":53753654542635,"sku":"5000-1050","price":676.92,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/tread-plate-aluminum-underbody-tool-box.webp?v=1781248179"},{"product_id":"adapt-single-lid-truck-toolbox","title":"Chandler ADAPT Single Lid Truck Toolbox","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Chandler ADAPT Single Lid Truck Toolbox is an aluminum crossover box that mounts behind the cab and gives you one wide lid for easy access to your gear. What sets it apart is the ADAPT system inside. The interior is lined with L-track rails, so you bolt in bins, holders, and racks wherever you want them instead of fighting a fixed layout. Your tools stay put and stay within reach.\u003c\/p\u003e\n\u003cp\u003eIf you have ever dug through a pile of loose tools in a standard box, you know the problem this solves. The ADAPT lets you build the storage around how you actually work. Set it up for the job today, then move things around when the job changes. It fits full size truck beds and is built from aluminum, so it holds up to daily use and weather without rusting out.\u003c\/p\u003e\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum crossover single-lid box\u003c\/strong\u003e: One large lid lifts up for fast, full access to everything inside, mounted behind the cab to keep your bed open.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eADAPT L-track interior\u003c\/strong\u003e: Rails run inside the box so you mount bins, holders, and racks anywhere along the track and keep tools organized your way.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather-resistant seal and locking lid\u003c\/strong\u003e: Gasket seals and a push-button locking latch help keep weather out and your gear secured.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRust-free aluminum build\u003c\/strong\u003e: Aluminum construction stands up to moisture and years of work without the rust that plagues steel boxes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish and color options\u003c\/strong\u003e: Choose the finish that matches your truck and your taste.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eChandler Truck Accessories\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eCrossover Tool Box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSystem\u003c\/th\u003e\n\u003ctd\u003eADAPT L-track compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eCrossover (behind cab)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLid\u003c\/th\u003e\n\u003ctd\u003eSingle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThis is a crossover box, so it mounts across the bed and rests on the bed rails just behind the cab. It sits in place using the rail flanges, which means no drilling into your truck and no permanent modifications. Set the box on the rails, line it up centered side to side, and secure it with the included hardware. Most truck owners can handle the install in their own driveway with basic hand tools. Call or text us first if you want to confirm fit for your bed before you order.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat is the ADAPT L-track system?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eADAPT is Chandler's integrated L-track rail system built into the toolbox. L-track is a slotted aluminum rail that lets you bolt accessories in at any point along its length. Instead of a fixed interior, you get a track you can configure and reconfigure to match your gear and your workflow.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat accessories fit the ADAPT toolbox?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eA wide range of ADAPT accessories mount to the L-track, including aluminum bins, a wrench rack, a screwdriver rack, a hammer holder, molle panels, D-rings, hooks, and ratchet straps. Accessories are sold separately, so you can start with the box and add the pieces you need over time.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat finishes and colors are available?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eThe ADAPT Single Lid box comes in finish and color options, so you can pick the look that fits your truck. Select your preferred finish from the options on this page before you check out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eDoes the toolbox lock?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eYes. The single lid uses a push-button locking latch to secure your gear, and gasket seals help keep weather out when the lid is closed. That combination keeps your tools both protected and locked down on the job site.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eNot sure it fits your truck? Chat or call our team at (623) 272-6510 before you order to activate our \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e Promise.\u003c\/p\u003e\n","brand":"Chandler Truck Accessories","offers":[{"title":"Default Title","offer_id":53753654575403,"sku":"5079-8972","price":1290.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/ADAPT-single-lid-truck-tool-box-closed-side.webp?v=1781248179"},{"product_id":"chandler-aluminum-underbody-camlock-toolbox","title":"Chandler Aluminum Underbody Camlock Toolbox","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Chandler Aluminum Underbody Camlock Toolbox mounts to the frame and hangs below the bed, so your storage rides outside the cargo area instead of inside it. That layout keeps the bed open for materials, ladders, and gear while you still carry tools, fittings, and small parts within reach. It is built for service trucks, work trucks, and trailers that run hard and need secure storage every day.\u003c\/p\u003e\n\u003cp\u003eThis box uses cam-over latches that pull the lid down against an automotive-grade one-piece gasket. That action seals the box tight and keeps road spray, dust, and weather out of your tools. The smooth aluminum body is robotically welded, runs a continuous stainless steel piano hinge, and adds a reinforced corner gusset and a rain gutter, so it holds up to the wear that comes with daily work duty. It is made in the USA.\u003c\/p\u003e\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrees up bed space\u003c\/strong\u003e mounts under the bed on the frame, so your cargo area stays open for hauling instead of holding a box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCam-over latches that seal and lock\u003c\/strong\u003e pull the lid tight against the gasket for a secure seal, and accept a padlock to keep your tools protected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather-resistant smooth aluminum\u003c\/strong\u003e sheds road spray and moisture and will not rust, so the box keeps working through wet weather and salty roads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple sizes available\u003c\/strong\u003e sold in several H x D x L dimensions, so you can match the box to your truck or trailer and the load you carry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for service and work duty\u003c\/strong\u003e robotically welded body, continuous stainless steel piano hinge, reinforced corner gusset, and rain gutter stand up to daily job-site use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eChandler Truck Accessories\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eUnderbody Tool Box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSmooth Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLatch\u003c\/th\u003e\n\u003ctd\u003eCam-over with padlock option\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHinge\u003c\/th\u003e\n\u003ctd\u003eContinuous stainless steel piano hinge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal\u003c\/th\u003e\n\u003ctd\u003eAutomotive-grade one-piece gasket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eUnderbody \/ frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes\u003c\/th\u003e\n\u003ctd\u003eMultiple (H x D x L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eMade in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThis toolbox bolts to the frame or underbody rails and hangs below the bed. Most installs use mounting brackets and hardware that anchor the box to the frame, with the right placement depending on your truck or trailer and the box size you choose. Pick a spot that clears your exhaust, suspension travel, tires, and any underbody equipment, then bolt the box down so it sits level and stays put on rough roads. If you want help confirming the box and mounting fit your setup before you order, call or text us first.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat is an underbody toolbox and where does it mount?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eAn underbody toolbox bolts to the frame or underbody rails and hangs below the bed of your truck or trailer. Because it mounts outside the cargo area, it gives you secure storage without taking up bed space you need for hauling.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat sizes does this Chandler underbody toolbox come in?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eThis box is offered in multiple sizes, listed by height, depth, and length (H x D x L). Choose the dimensions that fit your frame clearance and the amount of tools or gear you plan to store. Reach out if you want help matching a size to your truck or trailer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eHow does the cam-over latch work?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eThe cam-over latch pulls the lid down and over a fixed point, which presses the lid firmly against the one-piece gasket. That keeps the box closed tight on rough roads and helps seal out dust, road spray, and weather.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eCan this toolbox be locked?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eYes. The cam-over latch includes a padlock option, so you can add a padlock to keep the box secured and your tools protected on the job site or in transit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eNot sure it fits your truck? Chat or call our team at (623) 272-6510 before you order to activate our \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e Promise.\u003c\/p\u003e\n","brand":"Chandler Truck Accessories","offers":[{"title":"18 X 18 X 60 CAM-OVER","offer_id":53753654640939,"sku":"5000-7030","price":999.0,"currency_code":"USD","in_stock":false},{"title":"24 X 24 X 60 CAM-OVER","offer_id":53753654673707,"sku":"5000-7040","price":1069.23,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/smooth-aluminum-cam-over-underbody-truck-toolbox.webp?v=1781248182"},{"product_id":"chandler-underbody-carbon-steel-toolbox","title":"Chandler Underbody Carbon Steel Toolbox","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eIf you run your truck for work, you know storage runs out fast. Tools end up loose in the bed, sliding around, getting lost or beat up. The Chandler Underbody Carbon Steel Toolbox gives you a hard, lockable spot to keep your gear, and it hangs under the truck instead of eating up your bed. It is built from 12-gauge carbon steel, so it stands up to the kind of daily abuse a service truck or trailer puts on equipment.\u003c\/p\u003e\n\u003cp\u003eCarbon steel is heavier and tougher than aluminum, which is the point. This box is robotically welded, finished in black powder coat, and sealed with a one-piece gasket to keep weather out. It mounts to the frame or underbody rails, so your bed stays open for lumber, equipment, or whatever else the job calls for. For crews and trailers that need secure, out-of-the-way storage that lasts, this is a straightforward pick.\u003c\/p\u003e\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-duty carbon steel\u003c\/strong\u003e takes the hits, drops, and rough handling that come with daily work-truck use without caving in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnderbody frame mount\u003c\/strong\u003e bolts beneath the truck and frees up your entire bed for hauling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocks tight and seals out weather\u003c\/strong\u003e with a die-cast adjustable T-handle, key lock, padlock loop, and a commercial-grade gasket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple sizes\u003c\/strong\u003e let you match the box to your frame length and the amount of gear you carry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for service duty\u003c\/strong\u003e with stainless steel hucked-on hinges, dual check chains, and a single-latch drop-down door for everyday reliability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eChandler Truck Accessories\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eUnderbody Tool Box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCarbon Steel (12-gauge)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eUnderbody \/ frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes\u003c\/th\u003e\n\u003ctd\u003eMultiple (Height x Depth x Length)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack powder coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDoor\u003c\/th\u003e\n\u003ctd\u003eDrop-down with dual check chains\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThis box bolts to the frame or underbody rails of your truck or trailer. Most installs put it between the front tires and the bulkhead, or between the rear tires and the bumper, wherever you have open frame to work with. Pick the size that fits your available space, mount it to solid frame, and torque the hardware down. If you are tight on room, measure your frame run before you choose a size so the box sits clean and clears your tires and exhaust.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhy pick carbon steel over aluminum?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eCarbon steel is heavier and tougher than aluminum, so it shrugs off dents, drops, and hard use. If your truck works for a living and the box takes abuse, steel holds up better over the long haul. The trade-off is weight, so steel makes the most sense when durability matters more than shaving pounds.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhere does this box mount?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eIt mounts underneath the truck on the frame or underbody rails, not in the bed. That keeps your bed open for hauling. Common spots are between the front tires and the bulkhead or between the rear tires and the bumper, depending on where you have open frame.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eDoes it come in different sizes?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eYes. This box comes in multiple sizes measured by height, depth, and length, so you can match it to your frame run and how much gear you carry. Measure your available underbody space first, then choose the size that fits without crowding your tires or exhaust.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eHow does it lock and keep weather out?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eIt uses a die-cast heavy-duty T-handle with a key lock plus a padlock loop for added security. A commercial-grade one-piece gasket seals the door, so it stays weather-resistant and keeps dust and moisture off your tools.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eNot sure it fits your truck? Chat or call our team at (623) 272-6510 before you order to activate our \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e Promise.\u003c\/p\u003e\n","brand":"Chandler Truck Accessories","offers":[{"title":"18 X 18 X 24","offer_id":53753654804779,"sku":"5100-1900","price":520.0,"currency_code":"USD","in_stock":false},{"title":"18 X 18 X 48","offer_id":53753654837547,"sku":"5100-2100","price":612.31,"currency_code":"USD","in_stock":false},{"title":"18 X 18 X 36","offer_id":53753654870315,"sku":"5100-2000","price":545.0,"currency_code":"USD","in_stock":false},{"title":"18 X 18 X 60","offer_id":53753654903083,"sku":"5100-2400","price":707.69,"currency_code":"USD","in_stock":false},{"title":"18 X 18 X 30","offer_id":53753654935851,"sku":"5100-2300","price":578.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/carbon-steel-underbody-tool-box-18x18x24.webp?v=1781248183"},{"product_id":"chandler-underbody-aluminum-tread-plate-barn-door-toolbox","title":"Chandler Underbody Aluminum Tread Plate Barn Door Toolbox","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Chandler Underbody Aluminum Tread Plate Barn Door Toolbox mounts under your truck or trailer instead of taking up room in the bed. It hangs off the frame rail, so the box sits below the deck and out of the way. The doors swing open like barn doors, which gives you a clear opening to reach tools, fittings, and gear without climbing or stretching. For service trucks, work trucks, and trailers that haul a lot, that is storage you can actually use every day.\u003c\/p\u003e\n\u003cp\u003eThe body is built from aluminum tread plate, the same diamond-pattern surface you see on truck running boards and trailer floors. That surface shrugs off scuffs and resists denting, and aluminum will not rust the way a steel box does after a few wet seasons. The box is weather-resistant and locks, so the contents stay protected from the elements and from anyone walking by. Chandler offers it in multiple sizes, so you can match the box to the frame space and the load you carry.\u003c\/p\u003e\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarn doors swing wide\u003c\/strong\u003e for a full, open reach-in. You get at everything inside without digging past a small flip-up lid or a single drop-down hatch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum tread plate body\u003c\/strong\u003e resists dents and dings from loose tools and road debris, and it will not rust, so the box holds up through years of weather and work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnderbody frame mount\u003c\/strong\u003e hangs the box below the deck and frees up your bed and trailer space for cargo, equipment, or a second toolbox.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocks and seals out weather\u003c\/strong\u003e so your tools and supplies stay secure and protected. The box is weather-resistant and keeps the contents dry in rain and road spray.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple sizes\u003c\/strong\u003e let you fit the box to your available frame length and how much you need to carry, on a pickup or a trailer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eChandler Truck Accessories\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eUnderbody Tool Box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminum Tread Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDoor\u003c\/th\u003e\n\u003ctd\u003eBarn Door\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eUnderbody \/ frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes\u003c\/th\u003e\n\u003ctd\u003eMultiple\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThis box bolts to the frame or underbody of your truck or trailer. It hangs off the frame rail under the bed or deck, using mounting brackets and hardware sized for the frame. Pick the spot along the rail where the box clears your suspension, exhaust, and tires, then bolt it down so it sits level and solid. Once it is mounted, the barn doors open to the side for full access, and the box stays put over rough roads. If you are not comfortable working under the vehicle, a shop or upfitter can mount it for you in about an hour.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eHow is a barn door box different from other toolbox latches?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eBarn doors swing open to the side and give you a wide, clear opening across the front of the box. A drop-down or flip-up lid only opens part of the box at a time, so you end up reaching around it. With barn doors you can see and grab everything inside at once, which is faster when you are working off the truck.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhere does this toolbox mount?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eIt mounts underbody, meaning it bolts to the frame rail and hangs below the bed or trailer deck. That keeps your bed and deck space open for cargo. You choose a spot along the frame that clears the suspension, exhaust, and tires, then bolt the box down with the brackets and hardware.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat sizes does it come in?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eChandler builds this box in multiple sizes so you can match it to your frame length and how much you haul. A shorter box fits a tight stretch of frame, while a longer box gives you more room for tools and supplies. Check the available size options and measure your frame before you order.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eDoes the box lock?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eYes. The box locks to keep your tools and gear secure, and it is weather-resistant to keep the contents protected from rain and road spray. That matters on a work truck or trailer that sits out on the job and overnight.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eNot sure it fits your truck? Chat or call our team at (623) 272-6510 before you order to activate our \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e Promise.\u003c\/p\u003e\n","brand":"Chandler Truck Accessories","offers":[{"title":"Default Title","offer_id":53753654968619,"sku":"5000-1055","price":815.38,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/TreadPlateAluminumUnderbodyToolbox18x18x30.webp?v=1781248183"},{"product_id":"adapt-gullwing-truck-toolbox","title":"Chandler ADAPT Gullwing Truck Toolbox","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Chandler ADAPT Gullwing Truck Toolbox is a full-size crossover box that mounts behind your cab and opens from both sides. Two gullwing lids lift up on gas struts, so you reach your tools from whichever side of the truck you are standing on. No more walking around the bed or leaning over a tailgate to dig for a wrench. You see everything inside, and you grab what you need fast.\u003c\/p\u003e\n\u003cp\u003eWhat sets this box apart is the ADAPT system. The interior and the lids are built around L-track and a molle panel, so you mount bins, holders, racks, and hooks exactly where you want them. Build the layout around the work you actually do, then change it when the job changes. The box is aluminum, weather-resistant, and locks down, so your gear stays put and stays dry between stops.\u003c\/p\u003e\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual gullwing lids\u003c\/strong\u003e open from either side of the truck on assisted gas struts, so your tools are always within reach no matter where you park or stand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eADAPT L-track interior\u003c\/strong\u003e lets you mount bins, holders, racks, and hooks anywhere along the rails, so you set up a storage layout that fits your gear instead of forcing your gear to fit the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather-resistant and locking\u003c\/strong\u003e design uses heavy gasket seals and push-button locking latches, keeping the elements out and your tools secure while you work or leave the truck unattended.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRust-free aluminum body\u003c\/strong\u003e with a diamond tread plate top holds up to daily work-truck abuse and the Arizona heat without corroding the way a steel box can.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish and color options\u003c\/strong\u003e let you match the box to your truck and your setup, so it looks like part of the build instead of an add-on.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eChandler Truck Accessories\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eCrossover Tool Box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSystem\u003c\/th\u003e\n\u003ctd\u003eADAPT L-track compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eCrossover (behind cab)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLid\u003c\/th\u003e\n\u003ctd\u003eDual Gullwing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTop Plate\u003c\/th\u003e\n\u003ctd\u003eDiamond Tread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLatches\u003c\/th\u003e\n\u003ctd\u003ePush-Button Locking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThis is a crossover mount, so the box sits across the bed and rests on the bed rails right behind the cab. It fits full-size truck beds. You set the box in place, line it up over the rails, and secure it down with the included hardware following Chandler's instructions. Most truck owners can handle the install in the driveway with basic hand tools. Once it is mounted, the gas struts carry the weight of the lids, so opening and closing takes one hand. If you have any question about fit on your specific truck, talk to us first and we will confirm it before you order.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eHow is a gullwing box different from a single-lid toolbox?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eA standard crossover box has one lid that opens up the top. The ADAPT Gullwing has two lids that open out and up from both sides of the truck. That means you reach in from whichever side you are standing on without walking around the bed, and you get a clear view of everything inside instead of looking down into one deep opening.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat is the ADAPT L-track system?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eADAPT is Chandler's mounting system built into the box. The interior rails and the molle panel use L-track, so you attach bins, holders, racks, hooks, and tie-down points anywhere along the track. You build a custom layout for your tools and gear, and you can rearrange it whenever your needs change. Most of those accessories are sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat finishes and colors are available?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eThe box comes in finish and color options so you can match it to your truck and your setup. Choose the option you want from the menu on this page. If you do not see a finish listed, reach out and we will tell you what is currently available.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eDoes the toolbox lock?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eYes. Both lids use push-button locking latches, so you can secure your tools when you leave the truck. Paired with the heavy gasket seals, the box keeps your gear locked down and protected from weather between stops.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eNot sure it fits your truck? Chat or call our team at (623) 272-6510 before you order to activate our \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e Promise.\u003c\/p\u003e\n","brand":"Chandler Truck Accessories","offers":[{"title":"Default Title","offer_id":53753655034155,"sku":"5070-8972","price":1450.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/ADAPT-gullwing-truck-tool-box-open.webp?v=1781248182"},{"product_id":"adapt-lo-side-truck-toolbox","title":"Chandler ADAPT Lo-Side Truck Toolbox","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Chandler ADAPT Lo-Side Truck Toolbox mounts low along your bed rail instead of standing tall across the bed. It sits down at rail height, so you keep your sightlines low and your bed open. You still get a dry, lockable place to stash tools and gear, but you do not give up the cargo space or the view out the back window that a tall crossover box eats up. It is built for full-size truck beds and runs as a single box on one rail or paired up with a second box on the other side.\u003c\/p\u003e\n\u003cp\u003eThis box is part of Chandler's ADAPT system. The interior and exterior carry L-track rails, so you build the box around the way you actually work. Bins, hooks, D-rings, socket trays, wrench racks, and a molle panel all clip into the track and lock down where you want them. You set it up once for your job, then change it later when the job changes. The shell is HD 10-gauge aluminum with a diamond tread plate top and a black powder coat finish, so it takes a beating in the bed and shrugs off the weather.\u003c\/p\u003e\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow profile along the bed rail\u003c\/strong\u003e keeps your bed open and your rear sightlines clear, so you load full-size cargo and still see out the back.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eADAPT L-track interior and exterior\u003c\/strong\u003e let you mount bins, hooks, D-rings, socket trays, and a molle panel exactly where you reach for them, then rearrange when the work changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather-resistant and locking\u003c\/strong\u003e with HD gasket seals and push-button lockable latches, so your tools stay dry on the road and locked when you walk away.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRust-free aluminum build\u003c\/strong\u003e using HD 10-gauge aluminum and a diamond tread plate top means no rot and a finish that holds up to daily bed abuse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish and color options\u003c\/strong\u003e let you match the box to your truck and the rest of your gear instead of settling for one look.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eChandler Truck Accessories\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eTruck Tool Box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSystem\u003c\/th\u003e\n\u003ctd\u003eADAPT L-track compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eBed rail (low side)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThe Lo-Side box mounts to your truck bed rail. It sits low against the rail on the side of the bed, so you keep the floor of the bed clear for cargo. Hardware and gas struts come ready to set the box in place and get the lid working. Once it is mounted, you load the L-track with the accessories you want and you are set. Run one box on a single rail, or add a second box on the other side for storage on both sides of the bed.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWill the Lo-Side box fit my truck bed?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eThe Lo-Side box is built for full-size truck beds and mounts to the bed rail on the side of the bed. It sits low at rail height, so it does not block your cargo floor or your view out the back. Send us your truck and we will confirm the fit before you buy.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat is the ADAPT L-track system?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eADAPT is Chandler's track-based storage system. The box carries L-track rails on the interior and exterior, and accessories like bins, hooks, D-rings, socket trays, wrench racks, and a molle panel clip into the track. You position them where you work and lock them down, then move them when the job changes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eDoes this box come in different finishes or colors?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eYes. The box ships with a powder coat finish over the aluminum shell, and finish or color options let you match it to your truck and the rest of your setup. Pick the option you want on this page before you check out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eDoes the Lo-Side toolbox lock?\u003c\/h3\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eYes. The box uses push-button lockable latches, so you can lock it down when you are on the move or parked away from the truck. HD gasket seals keep the inside weather-resistant, so your tools stay dry and secure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eNot sure it fits your truck? Chat or call our team at (623) 272-6510 before you order to activate our \u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e Promise.\u003c\/p\u003e\n","brand":"Chandler Truck Accessories","offers":[{"title":"Default Title","offer_id":53753655066923,"sku":"5075-8642","price":950.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/ADAPT-lo-side-truck-tool-box-closed.webp?v=1781248184"}],"url":"https:\/\/truckbedbarn.com\/collections\/truck-tool-boxes.oembed","provider":"Truck Bed Barn","version":"1.0","type":"link"}