{"product_id":"bodyguard-a2l-base-front-bumper-for-2020-2023-chevrolet-silverado-2500-3500-gac20b","title":"Bodyguard A2L Base Front Bumper | For 2020 to 2023 Chevrolet Silverado 2500\/3500","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe Bodyguard A2L Base Front Bumper is a low-profile, lightweight front replacement built for show trucks and daily drivers that still need real steel up front. It sits lower and leaner than the standard A2, and the base trim keeps the face clean with no light tabs or D-rings welded on.\u003c\/p\u003e\n\u003cp\u003eThe shell is a 10 gauge plate-style steel body backed by 3\/16 inch frame mounts and 3\/4 inch thick shackle mounts. Every unit is engineered, assembled, and welded at Bodyguard's facility in Texas, then finished with stainless button-head bolts for clean visible hardware.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow-profile stance\u003c\/strong\u003e Sits tighter to the truck than a standard A2 for a cleaner daily-driver look.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLighter weight\u003c\/strong\u003e Average 135 to 165 lbs depending on application, easier on the front end than heavier off-road bumpers.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModular build\u003c\/strong\u003e Bolt-on center skid, light bar brackets, and license plate bracket let you run the bumper clean or build it out over time.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRigid light ready\u003c\/strong\u003e Rectangle cutout for a Rigid E-series light bar plus bolt-on brackets for Rigid surface mount cube lights.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReal steel\u003c\/strong\u003e 10 gauge plate shell with 3\/4 inch shackle mounts holds up to recovery duty even though the profile is low.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures \u0026amp; Specs\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 10 gauge plate-style steel shell\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrame Mounts:\u003c\/strong\u003e 3\/16 inch steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShackle Mounts:\u003c\/strong\u003e 3\/4 inch thick steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 135 to 165 lbs average, varies by application\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWinch Compatibility:\u003c\/strong\u003e None. This is a NON-winch mount bumper. If you need a similar look with a winch mount, move up to the A2 Series.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLight Mounts:\u003c\/strong\u003e Rectangle cutout for Rigid 30 inch E-series light bar on most models, plus bolt-on brackets for Rigid surface mount cube lights. Colorado, Canyon, and Tacoma applications fit a single Rigid 20 inch bar. Tahoe, Suburban, Yukon, and Yukon XL are single bar only.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter Skid:\u003c\/strong\u003e Bolt-on\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLicense Plate:\u003c\/strong\u003e Bolt-on bracket included\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLogo:\u003c\/strong\u003e Bodyguard logo cutout\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e Stainless button-head bolts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBuild Location:\u003c\/strong\u003e Engineered, assembled, and welded in Texas\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Limited Lifetime Warranty on manufacturing defects in workmanship and material. Limited One Year Warranty on powder coat finish from date of purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThe A2L Base is a bolt-on front replacement. You remove the factory bumper and bolt the A2L directly to the frame using the included hardware. Plan on a couple hours with a helper and basic hand tools. Trucks with adaptive cruise or front sonar sensors may need a module recalibration after install, and in some cases a dealer flash to fully reset. Factory bumper trim is required on Colorado, Canyon, 2007 to 2014 Suburban 2500, 2015 to 2020 Tahoe and Suburban 1500, and 2015 to 2020 Yukon and Yukon XL.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eA2L Base front bumper shell\u003c\/li\u003e\n  \u003cli\u003eBolt-on center skid plate\u003c\/li\u003e\n  \u003cli\u003eBolt-on light bar brackets (where applicable)\u003c\/li\u003e\n  \u003cli\u003eBolt-on cube light brackets (where applicable)\u003c\/li\u003e\n  \u003cli\u003eBolt-on license plate bracket\u003c\/li\u003e\n  \u003cli\u003eStainless button-head mounting bolts\u003c\/li\u003e\n  \u003cli\u003eWarranty documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout Bodyguard Bumpers\u003c\/h2\u003e\n\u003cp\u003eBodyguard is a small-batch, American bumper shop that engineers, assembles, and welds every unit in Texas. The A2L line is their low-profile answer for owners who want real plate steel up front without the bulk of a full heavy-duty off-road bumper. You can see the full \u003ca href=\"\/collections\/bodyguard\"\u003eBodyguard collection\u003c\/a\u003e for matching rear bumpers and higher trims.\u003c\/p\u003e\n\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003eThe A2L Base ships to match a specific year, make, and model. Medium duty trucks (Ford F350-wide, F450, F550, Ram 4500, 5500) use a wider body to clear factory fender trim. Ram Sport models with parking sensors need OEM sensor bezels purchased from a dealership. This bumper is NOT compatible with Dodge Ram Warlock edition trucks, and 2019 to 2021 Chevy 1500 and GMC 1500 bumpers are not interchangeable across brands.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/our-fitment-guarantee\"\u003eFitment guaranteed\u003c\/a\u003e when you buy through Truck Bed Barn. Call or text our team at (623) 272-6510 BEFORE you order so we can verify year, make, model, trim, and sensor package. We confirm fit up front, not after the order.\u003c\/p\u003e\n\n\u003cp\u003eReady to run a cleaner stance up front? Browse the full \u003ca href=\"\/collections\/bodyguard\"\u003eBodyguard collection\u003c\/a\u003e or reach out and we'll line up the right A2L for your truck.\u003c\/p\u003e","brand":"Bodyguard Bumpers","offers":[{"title":"Textured Black Powder Coat \/ with Parking Sensor Cutouts","offer_id":53333508063531,"sku":"GAC20BYTNN","price":2570.0,"currency_code":"USD","in_stock":true},{"title":"Bare Metal \/ with Parking Sensor Cutouts","offer_id":53333508096299,"sku":"GAC20BYBNN","price":2295.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/9148\/2923\/files\/2019-2024_Ram_2500-3500_-_A2L_Series_-_Base_Front_Bumper__20236_1235x601_739f5e64-a501-46d5-b6ae-6fce6865fa82.jpg?v=1776985733","url":"https:\/\/truckbedbarn.com\/products\/bodyguard-a2l-base-front-bumper-for-2020-2023-chevrolet-silverado-2500-3500-gac20b","provider":"Truck Bed Barn","version":"1.0","type":"link"}