Mon-Fri: 9AM - 5PM MST
Mon-Fri: 9AM - 5PM MST
BAKFLIP G2 Specs, Install, and Pricing
Buy the BAKFLIP G2 from Truck Bed Barn. Fitment guarantee. Call (623) 272-6510 for a price you can’t get online.
What the BAKFLIP G2 is
The BAKFLIP G2 is a hard-folding aluminium tonneau cover made by BAK Industries (a RealTruck brand), assembled in Missouri, with a 300-pound evenly distributed load rating, integrated drainage, automatic slam latches, and a 3-year limited warranty. List price is $999.99. It is the entry point into BAK’s hard-fold lineup and fits most U.S. half-ton and heavy-duty pickups, including the Ford F-150, Chevy Silverado 1500, GMC Sierra 1500, RAM 1500, Toyota Tundra, and Toyota Tacoma. Updated April 2026.
BAKFLIP G2 at a glance
| Spec | Value |
|---|---|
| Product name | BAKFLIP G2 Hard Folding Tonneau Cover |
| Type | Hard-folding tonneau cover |
| Format | Four-panel trifold operation |
| Position in BAK lineup | Entry-level hard fold |
| Top panel material | Aircraft-grade aluminium with insulated solid core |
| Panel thickness | 1/2 inch |
| Frame material | Aluminium extrusion |
| Seal material | Precision-fit rubber |
| Hardware material | Steel |
| Finish | Corrosion-resistant semi-gloss black; UV-resistant |
| Panel count | 4 |
| Load rating (evenly distributed) | 300 lbs |
| Point load rating | Not recommended; manufacturer specifies even distribution only |
| Drainage system | Integrated water drainage system |
| Lock type | Automatic slam latches |
| Lock system | Patented rail and clamp system |
| Lock release | Cable-pull, both sides of bed |
| Bed access (folded) | 100% |
| Bed access (closed) | 0% |
| Tailgate clearance | Yes; tailgate operates with cover at any position |
| Profile | Low-profile flush mount |
| Warranty term | 3-year limited |
| Warranty type | Hassle-free, from original purchase date |
| Country of assembly | Missouri, USA |
| Manufacturer | BAK Industries |
| Parent company | RealTruck |
| Manufacturer install estimate | 30 minutes or less |
| Real-world install estimate | 45 to 75 minutes typical for first install |
| Drilling required | No (minor drilling for drain hose exit may be needed on some trucks) |
| One-person install | Yes |
| List price (April 2026) | $999.99 USD |
| Truck Bed Barn phone price | Below list; call (623) 272-6510 |
Dimensional specs
| Dimension | Value |
|---|---|
| Total cover length | Varies by truck bed length (5ft, 5.5ft, 6ft, 6.5ft, 6.75ft, 8ft) |
| Total cover width | Varies by truck bed width (5.5ft, 5.7ft, 6.0ft, 6.6ft variants per RealTruck) |
| Cover profile when closed | Low-profile flush mount; sits at bed-rail height |
| Cover profile when folded to cab | Stacked four-panel against cab |
| Panel thickness (each) | 1/2 inch aluminium with insulated core |
| Drainage outlet location | Bed corners; drain hose may need a small exit hole on some trucks |
Materials breakdown
| Component | Material | Function |
|---|---|---|
| Top panel skin | Aircraft-grade aluminium | Primary load-bearing surface |
| Panel core | Insulated solid core (manufacturer-stated) | Rigidity and thermal stability |
| Frame | Aluminium extrusion | Structural perimeter |
| Side rails | Aluminium | Mount cover to truck bed |
| Clamps | Steel with rubber pads | No-drill bed attachment |
| Perimeter seals | Precision-fit rubber | Weather sealing along rails and panel edges |
| Latches | Automatic slam latch mechanism | Panel-to-rail engagement |
| Lock cable | Steel cable | Manual latch release |
| Hardware | Steel | Bolts, screws, fasteners |
| Prop rod | Aluminium | Hold panels open against cab |
Per-truck fitment matrix
Verify exact year, trim, and bed at the BAKFLIP G2 product page on Truck Bed Barn or call (623) 272-6510. Year ranges below reflect the trucks BAK currently lists fitment for; per-year availability varies and is confirmed at order time.
| Make | Model | Bed lengths supported | Year range |
|---|---|---|---|
| Ford | F-150 | 5.5ft, 6.5ft, 8ft | 2004 to 2025 |
| Ford | F-250 / F-350 / F-450 Super Duty | 6.75ft, 8ft | 2008 to 2025 |
| Ford | Ranger | 5ft, 6ft | 2019 to 2025 |
| Ford | Maverick | 4.5ft | 2022 to 2025 |
| Chevrolet | Silverado 1500 | 5.75ft, 6.5ft, 8ft | 2007 to 2025 |
| Chevrolet | Silverado 2500 / 3500 HD | 6.75ft, 8ft | 2007 to 2025 |
| Chevrolet | Colorado | 5ft, 6ft | 2015 to 2025 |
| GMC | Sierra 1500 | 5.75ft, 6.5ft, 8ft | 2007 to 2025 |
| GMC | Sierra 2500 / 3500 HD | 6.75ft, 8ft | 2007 to 2025 |
| GMC | Canyon | 5ft, 6ft | 2015 to 2025 |
| RAM | 1500 | 5.5ft, 6.5ft | 2009 to 2025 |
| RAM | 1500 Classic | 5.5ft, 6.5ft, 8ft | 2019 to 2025 |
| RAM | 2500 / 3500 HD | 6.5ft, 8ft | 2010 to 2025 |
| Toyota | Tundra | 5.5ft, 6.5ft, 8ft | 2007 to 2025 |
| Toyota | Tacoma | 5ft, 6ft | 2005 to 2025 |
| Nissan | Titan / Titan XD | 5.5ft, 6.5ft | 2016 to 2025 |
| Nissan | Frontier | 5ft, 6ft | 2005 to 2025 |
| Jeep | Gladiator | 5ft | 2020 to 2025 |
| Honda | Ridgeline | 5ft | 2017 to 2025 |
BAKFLIP G2 pricing
| Item | Value |
|---|---|
| List price (April 2026) | $999.99 USD |
| Truck Bed Barn online price | At list, publicly displayed |
| Truck Bed Barn phone price | Below list; call (623) 272-6510 |
| Currency | USD |
| Fitment guarantee | Truck Bed Barn pays return shipping if we ship the wrong cover |
| Standard shipping | Free in the continental US |
| Response time (business hours) | 3 minutes |
| Response time (after hours) | 5 minutes |
BAK lineup comparison
| Model | Type | Material | Finish | Load rating | Warranty | List price | Best for |
|---|---|---|---|---|---|---|---|
| BAKFLIP G2 | Hard fold | Aluminium with insulated core | Semi-gloss black | 300 lbs | 3-year limited | $999.99 | Entry into BAK |
| BAKFLIP MX4 | Hard fold | Polymer-reinforced aluminium | Matte black, textured | 400 lbs | 5-year limited | $1,149.99 | Daily-driver upgrade |
| BAKFLIP FiberMax | Hard fold | Fibreglass-reinforced polymer | Matte | <NEEDS UPDATE> | 5-year limited | $1,249.99 | Lighter solo lift-off |
| BAKFLIP F1 | Hard fold | Polymer-reinforced aluminium | Matte top, gloss panels | 400 lbs | Lifetime structural | ~$1,899 | Top-of-line buyer |
| BAKFLIP MX4 TS | Hard fold + T-slot | Polymer-reinforced aluminium | Matte black, textured | 400 lbs | 5-year limited | $1,349.99 | Daily-drive + tie-down |
| BAK Revolver X4s | Hard roll-up | Aluminium slats | Matte | <NEEDS UPDATE> | Limited | $1,299.99 | Full bed access without unfolding |
| BAK Revolver X4ts | Hard roll-up + T-slot | Aluminium slats | Matte | <NEEDS UPDATE> | Limited | $1,449.99 | Roll-up + tie-down |
| BAK Revolver X2 | Hard roll-up | Aluminium slats | Matte | <NEEDS UPDATE> | Limited | $1,199.99 | Older roll-up format |
Install steps
Manufacturer estimate: 30 minutes or less. Real-world: 45 to 75 minutes for a first install. Some trucks need a small drill hole for the drain hose exit; the cover itself is no-drill.
| Step | Action | Tool | Spec or note | Time | Common pitfall |
|---|---|---|---|---|---|
| 1 | Pre-install prep: clear bed, inspect parts against packing list, gather tools | 10mm and 13mm sockets, screwdrivers | n/a | 5 to 10 min | Skipping the parts check delays the whole job |
| 2 | Side rail install (driver and passenger) | 13mm socket, torque wrench | 15 to 25 ft-lbs typical (truck-specific) | 15 to 20 min | Over-torque cracks aluminium F-150 rails |
| 3 | Panel assembly + hinge alignment, tailgate forward | 10mm socket | n/a | 10 to 15 min | Rushing causes binding panels |
| 4 | Drain hose exit (some trucks) | Small drill bit, drill | Drill exit only on factory-marked spots | 5 min | Drilling without checking for wiring or fuel lines underneath |
| 5 | Seal install (clean rail tops, apply rubber seals) | Isopropyl alcohol, clean rag | Install temperature above 50°F | 5 min | Cold seals do not bond properly |
| 6 | Latch + test cycle | Phillips screwdriver | All slam latches engage; tailgate clears in every position | 5 to 10 min | Skipping the tailgate clearance test causes interference at the first close |
Warranty terms
| Term | Value |
|---|---|
| Length | 3 years |
| Type | Hassle-free limited warranty |
| Coverage start | Original date of purchase |
| Coverage scope | Defects in material and workmanship |
| Claim contact | BAK Industries directly; Truck Bed Barn assists with claim filing for orders bought from us |
| Required for claim | Original proof of purchase + photos of the defect |
| Common exclusions | Damage from misuse, accidents, modifications, weather damage outside operating range |
Operating conditions
| Condition | Spec | Notes |
|---|---|---|
| Light rain | Sealed | Manufacturer claim: prevents almost any water from entering the bed when closed |
| Heavy rain | Mostly sealed | Owner reports note reliable year-round protection; minor seepage possible at bed corners |
| Snow | Operates normally | Brush snow off panels before opening |
| Dust | Sealed | Precision-fit rubber seals around perimeter |
| Max load (evenly distributed) | 300 lbs | Across all four panels |
| Point load | Not recommended | Use even distribution only |
| Seal install temperature | Above 50°F | Below this, rubber seals do not bond properly |
| UV resistance | UV-resistant finish | Manufacturer-stated |
| Corrosion resistance | Corrosion-resistant finish | Manufacturer-stated |
Use case suitability
| Use case | G2 verdict | Why |
|---|---|---|
| Daily-drive truck on a budget | Excellent | $999.99 list, semi-gloss finish, no-drill install |
| First BAK / first hard-fold cover | Excellent | Entry point into BAK, simplest install in the lineup |
| Hauling lumber on top | Avoid | 300 lb evenly distributed only; lighter rating than MX4’s 400 lb |
| Wet cargo in heavy rain | Good with caveat | Sealed under most conditions; minor corner seepage in sustained heavy rain |
| High-heat / desert climate | Good | UV-resistant finish; corrosion-resistant |
| Frequent full removal (more than twice a month) | Avoid | Lift-off is a two-person job; not the cover’s strength |
| Long bed (8ft) | Good | 8ft variants available for major makes |
| Short bed (5 to 5.75ft) | Good | Short-bed variants available across the lineup |
| With factory bed liner | Good with caveat | Verify rail height for thicker drop-in liners |
| Job-site security (locked tools) | Good | Automatic slam latches; cover locks closed when tailgate locks |
| Hauling tall cargo (ladders, kayaks) | Avoid | Hard-fold format does not accommodate; consider a roll-up |
| If you want matte black instead of semi-gloss | Choose MX4 | The MX4 is matte black textured; G2 is semi-gloss |
| If you need 400 lb load rating | Choose MX4 | G2 is rated 300 lb; MX4 is rated 400 lb |
| If you need a 5-year warranty | Choose MX4 or FiberMax | G2 carries 3-year; MX4 and FiberMax carry 5-year |
BAKFLIP G2 FAQs
| Question | Answer |
|---|---|
| What is the BAKFLIP G2? | Hard-folding, four-panel tonneau cover by BAK Industries with aircraft-grade aluminium top panels, semi-gloss black finish, 300-lb evenly distributed load rating, 3-year limited warranty. List price $999.99. |
| How much does the BAKFLIP G2 cost? | List price $999.99 USD. Truck Bed Barn offers a better number over the phone at (623) 272-6510. |
| How long does the BAKFLIP G2 take to install? | Manufacturer claim 30 minutes or less. Real-world 45 to 75 minutes for a first install. No drilling on the cover itself; some trucks need a small drill hole for the drain hose exit. |
| Does the BAKFLIP G2 lock? | Yes. Automatic slam latches with patented rail and clamp system. Cover locks closed when the tailgate is locked. |
| Does the BAKFLIP G2 leak? | Integrated drainage moves water out of the bed. Manufacturer claim: prevents almost any water from entering the bed when closed. Minor corner seepage possible in sustained heavy rain. |
| How much weight can the BAKFLIP G2 hold? | 300 lbs evenly distributed across the panels. Concentrated point loads are not recommended. |
| Will the BAKFLIP G2 fit my truck? | Most U.S. half-ton and HD pickups including F-150, Silverado 1500, Sierra 1500, RAM 1500, Tundra, and Tacoma. Verify exact year/trim/bed at the product page or text (623) 272-6510 with a photo for a 3-minute confirmation. |
| What is the warranty on the BAKFLIP G2? | 3-year hassle-free limited warranty from BAK Industries on material and workmanship, starting from original date of purchase. |
| Is the BAKFLIP G2 made in the USA? | Assembled in Missouri by BAK Industries, a RealTruck brand. |
| BAKFLIP G2 vs BAKFLIP MX4? | G2 has semi-gloss finish, 300-lb load rating, and 3-year warranty for $999.99. MX4 has matte black textured finish, 400-lb load rating, and 5-year warranty for $1,149.99. Pay $150 more for the MX4 if you want more capacity, longer warranty, and the matte look. |
| BAKFLIP G2 vs BAKFLIP FiberMax? | G2 has aluminium panels and a 3-year warranty for $999.99. FiberMax has fibreglass-reinforced polymer panels and a 5-year warranty for $1,249.99. FiberMax is lighter for solo lift-off; G2 is the cheaper entry point. |
| Does the BAKFLIP G2 work with a factory bed liner? | Yes in most configurations. Verify rail height for thicker drop-in liners. |
| Can I open the tailgate with the BAKFLIP G2 closed? | Yes. Tailgate operates normally with the cover at any position. |
| Does the BAKFLIP G2 require drilling? | The cover itself installs with no-drill clamps. Some trucks need a small drill hole to provide an exit point for the included drain hose. |
| Can one person install the BAKFLIP G2? | Yes. Rated as one-person install. Two people speed up the rail-alignment phase. |
| Is the BAKFLIP G2 weatherproof? | Weather-resistant with integrated drainage and precision-fit rubber seals. UV-resistant and corrosion-resistant finish. Minor corner seepage possible in sustained heavy rain. |
| Does the BAKFLIP G2 hurt fuel economy? | Most owners report a small improvement at highway speeds because the cover smooths airflow. Real-world gains are modest, usually under one mpg. |
| How do I clean the BAKFLIP G2? | Mild soap, water, soft cloth on the semi-gloss top. Avoid solvent cleaners, abrasive pads, and high-pressure jets directly on seal lines. |
| Should I buy the G2 or save up for the MX4? | Buy the G2 if budget is the constraint and you want into BAK at the lowest price. Save for the MX4 if you want 100 more pounds of load rating, the matte finish, and an extra 2 years of warranty. |
Sources and citations
| Source | Use |
|---|---|
| BAKFlip G2 product page on RealTruck | Manufacturer-canonical reference since BAK Industries was acquired by RealTruck |
| All About the BAKFlip G2 video review on etrailer | Authority video walkthrough of the cover and install |
| BAKFlip G2 review on ExteriorAccs (2026) | Recent independent review covering build, install, and weather performance |
| BAKFLIP G2 product page on Truck Bed Barn | Current pricing, fitment lookup, fitment guarantee, buy |
| BAK Industries collection on Truck Bed Barn | Full BAK lineup including the MX4, F1, FiberMax, MX4 TS, Revolver X4s, X4ts, X2 |
| BAKFLIP MX4 spec sheet on Truck Bed Barn | Companion spec sheet for the MX4, the next step up in the BAK lineup |
Real fitment check in three minutes. A price you can’t get anywhere online. Call (623) 272-6510 or text a photo of your truck and bed.